Fix error 304 phptrabajos

Filtro

Mis búsquedas recientes
Filtrar por:
Presupuesto
a
a
a
Tipo
Habilidades
Idiomas
    Estado del trabajo
    515 fix error 304 php trabajados encontrados, precios en USD

    ...identity and our budget can not be more than $ 120, we decided to simplify our contest PLEASE WE NEED LOGO DESIGN OF OUR COMPANY WITH A SYMBOL AND SLOGAN our company is INOX 304 is a company dedicated to selling furniture and equipment for heat (kitchens, fryers, ovens, etc.) equipment for cold (freezing, conservative, cooling, etc.) in stainless steel

    $132 (Avg Bid)
    Garantizado Sellado Concurso Principal
    $132
    46 participaciones

    ...900000 + 300000 rodamiento, mas prestaciones de ley horario: Disponibilidad de tiempo Indispensable tener MOTOCICLETA, interesados presentarse en la calle 59 # 13 - 33 oficina 304 preguntar por Yair Cubillos con Hoja de vida y fotocopia de la tarjeta profesional en Horario fijo de 7:30am o 2pm.-...

    N/A
    N/A
    0 ofertas

    ...mantenimiento).SALARIO $ 1.050.000 mas prestaciones de ley. si esta interesado en la oferta laboral y si cumple con el perfil por favor presentarse en la calle 59 numero 13- 33 oficina 304 chapinero presentarse con Yair Cubillos-...

    N/A
    N/A
    0 ofertas

    ...mantenimiento).SALARIO $ 1.050.000 mas prestaciones de ley. si esta interesado en la oferta laboral y si cumple con el perfil por favor presentarse en la calle 59 numero 13- 33 oficina 304 chapinero presentarse con Yair Cubillos-...

    N/A
    N/A
    0 ofertas

    ...según la ley, Salario básico $ 3.000.000 + prestaciones de ley, Horario de Lunes a Sábado con Disponibilidad de Tiempo, interesados presentarse en la calle 59 # 13 - 33 oficina 304 preguntar por Yair Cubillos con Hoja de vida y fotocopia de la tarjeta profesional en Horario fijo de 7:30am o 2pm-...

    N/A
    N/A
    0 ofertas
    Urgente Tecnico Finalizado left

    ...Microsoft). Horario de lunes a viernes 7:30 am a 5:30 pm, salario 900000 + 200000 de rodamiento+prestaciones de [iniciar sesión para ver URL] presentarse en la Calle 59 # 13 - 33 Oficina 304 barrio Chapinero, preguntar por Yair Cubillos Villalba con Hoja de Vida-...

    N/A
    N/A
    0 ofertas

    ...Microsoft). Horario de lunes a viernes 7:30 am a 5:30 pm, salario 900000 + 200000 de rodamiento+prestaciones de [iniciar sesión para ver URL] presentarse en la Calle 59 # 13 - 33 Oficina 304 barrio Chapinero, preguntar por Yair Cubillos Villalba con Hoja de Vida-...

    N/A
    N/A
    0 ofertas

    ...Nomina; conocimiento en lenguaje de programación Java y .Net, Horario de Lunes a Viernes, Salario básico $3.000.000 Interesadas presentarse en la Calle 59 # 13 - 33 Oficina 304 barrio Chapinero, preguntar por Yair Cubillos Villalba con Hoja de Vida-...

    N/A
    N/A
    0 ofertas

    ...Nomina; conocimiento en lenguaje de programación Java y .Net, Horario de Lunes a Viernes, Salario básico $3.000.000, Interesadas presentarse en la Calle 59 # 13 - 33 Oficina 304 barrio Chapinero, preguntar por Yair Cubillos Villalba con Hoja de Vida-...

    N/A
    N/A
    0 ofertas

    ...Tecnologo Eléctrico con o sin experiencia para laborar de Lunes a Viernes, Salario básico $689.4555 + prestaciones de ley, Interesados, presentarse en la Calle 59 # 13 – 33, Oficina 304, barrio chapinero con hoja de vida preguntar por Yair Cubillos en Horario Fijo de 8am o 2pm.-...

    N/A
    N/A
    0 ofertas

    Programacion de motores paso a paso ya con driver para proyecto de dobladora de tubos de acero AISI-304. Necesario hacer secuencias diferentes para que los motores realicen series de trabajo para lograr los dobleces requeridos, usando desde un sensor de precencia hasta el control de tiempo y angulo de accion de los motores a paso.

    $308 (Avg Bid)
    $308 Oferta Promedio
    2 ofertas

    Website - photo editing (retouching images in photoshop/illustrator)

    $300 (Avg Bid)
    $300 Oferta Promedio
    1 ofertas

    ...show the 8 regions of the country Map 2: making it interactive so it can primarily show the 33 town cities of the country Map 2: making it interactive so it can show all the 304 districts of the country. Possibility to zoom the maps with clear images, without loosing quality. Possibility to download maps. -- Please be reasonable on the price as this

    $117 (Avg Bid)
    $117 Oferta Promedio
    9 ofertas

    ...undefined reference to `I2C_DeviceRead' CMakeFiles/[iniciar sesión para ver URL]: In function `main': /home/robo/Documents/1212/Amb-Sensor-Test clion 1223/testing.c:304: undefined reference to `I2C_GetNumChannels' /home/robo/Documents/1212/Amb-Sensor-Test clion 1223/testing.c:311: undefined reference to `I2C_GetChannelInfo' /home/robo/Docum

    $24 (Avg Bid)
    $24 Oferta Promedio
    19 ofertas

    ...following 1. Web design skill- php, laravel, vue, .net 2. Windows server, Linux, Centos 3. LInux and windows based hosting 4. Adword, Analytics and paid advertisements 5. Social media free post and paid post/boost/advertisement. 6. App development-android and ios 7. error code fixing, 301. 304, 404, 500 and any webpage error. 8. Email Template design and

    $3 / hr (Avg Bid)
    $3 / hr Oferta Promedio
    7 ofertas

    ...for 2 images in 3d for this stainless steel stool. The dimensions are as follows. 1) Top dimension: 1 feet by 1 feet 2) height from bottom tip to top: 7 inches 3) Material: 304 grade mirror finish stainless steel Ask all the good questions before bidding. need two angles, 45 degree view and side view. Here is the product picture. https://drive

    $19 (Avg Bid)
    $19 Oferta Promedio
    8 ofertas
    Trophy icon Logo Designing Finalizado left

    ...Witness the best with metals here Company Details: Good Luck Metal Crafts is a company dedicated to the manufacturing of kitchenware products. We manufacture stainless steel 304-grade wire mesh strainers which makes our products food-grade quality, which is a measure of how good a tool or equipment is for food production, storage or preparation...

    $56 (Avg Bid)
    Garantizado
    $56
    334 participaciones

    We are looking for sale agents for building material reseller / retailer chains. We produces roof drain by stainless steel 304, thickness 3mm. They go on the gutter to stop leaves from clogging up the down pipes. Therefore, we need a list of stores and advices on how to bring our products into these chains.

    $11 / hr (Avg Bid)
    $11 / hr Oferta Promedio
    2 ofertas

    We are looking for sale agents for building material reseller / retailer chains. We produces strainer by stainless steel 304, thickness 3mm. Therefore, we need a list of stores and advices on how to bring our products into these chains.

    $12 / hr (Avg Bid)
    $12 / hr Oferta Promedio
    1 ofertas

    Hi Nadezhda Alekseyevna D., I noticed your profile and would li...convert an STP file into AutoCAD format, and then make alterations to it? I also need an approximation of the final weight of the product, I’d most likely be producing it in 304 stainless. The circumference and total length of the design is flexible to accommodate the required weight

    $30 / hr (Avg Bid)
    $30 / hr Oferta Promedio
    1 ofertas

    ...costs should include: - mold design and creation - 1,000 units of the stainless steel bottle - Samples of the new bottle before the 1,000 units - All parts of the bottle - 304 stainless steel used - Coloring(based enamel paint) (3 different colored bottles; 400 units of 1 color ,and 300 units of the 2nd color, and 300 units of the 3rd color) - logo

    $413 (Avg Bid)
    $413 Oferta Promedio
    31 ofertas
    CNC Manufacturing Finalizado left

    Hi, We are looking for a machine shop. Part are to be made by CNC / lathe, in SS 304 and polished There is 6 parts to be fabricated European supplier preferred please bid if you have access to such equipment Part files will be sent to selected freelancer to carry the job

    $1067 (Avg Bid)
    $1067 Oferta Promedio
    25 ofertas

    ...product is dry plastic granules with small amounts of copper mixed in (see photo attached) - need variable speed from 0.5-2m3/hr (must be able to control speed) - stainless steel 304 construction - vibrating 1.5m3 hopper with minimum 50deg sides to ensure product falls down in screw auger - hopper to have rectangular shape with one side at least 1400mm wide

    $317 (Avg Bid)
    $317 Oferta Promedio
    64 ofertas

    we want to make ss 304 grade steel jigs for car paint shop.

    $13 (Avg Bid)
    $13 Oferta Promedio
    27 ofertas

    Machining for 5 small parts. Will need cost estimates for Aluminum Alloy 6061 T6 and 6061 T651, and stainless steel 304 with a 2b finish and unfinished. These are the specifications of the parts: 1. Rectangle Length: starts with a clearance of 1/4” to first hole and 1/4” clearance from last hole to end of other side Height and Width: 1” Holes: Three

    $37 (Avg Bid)
    $37 Oferta Promedio
    17 ofertas

    Machining 5 small parts. Have 3D models. Will need cost estimates for Aluminum Alloy 6061 T6 and 6061 T651, and stainless steel 304 with a 2b finish and unfinished.

    $45 (Avg Bid)
    $45 Oferta Promedio
    18 ofertas

    ...called [iniciar sesión para ver URL] which is currently set up in CMYK. This image is being used on the front of packaging and the image needs to be reduced to 3 colours only (PMS 304, PMS 072 and Black – so 2 spot channels and black only). We also need to increase the contrast slightly of the mans back and lighten it up a little. The glow of the back patches

    $48 (Avg Bid)
    $48 Oferta Promedio
    28 ofertas

    This project is on Materials Engineering. I need a manuscript written on "ANFIS modeling studies to improve weld strength of AISI 304 and AISI 1040 dissimilar friction weld joints" based on the attached study details and outline. The length of the manuscript should be about 3000 words (words in References are not counted). I will provide the result

    $232 (Avg Bid)
    $232 Oferta Promedio
    5 ofertas
    SOLIDWORKS_01 Finalizado left

    ...McMaster Carr 5990K312) ○ Pin = 5 hp (max that can be supplied) ○ Win = 1750 rpms (assume constant and controlled) ● Output (from winch) ○ F LOAD = 2200 lbs ○ d cable = 0.5 inch (304 stainless steel) ○ L cable = 60 feet (The length of the cable will coil on the drum/shaft) ● Structurally ○ All structural components (i.e. brackets, beams, etc), must have a

    $2 / hr (Avg Bid)
    $2 / hr Oferta Promedio
    16 ofertas
    SOLIDWORKS_ANSYS -- 02 Finalizado left

    ...McMaster Carr 5990K312) ○ Pin = 5 hp (max that can be supplied) ○ Win = 1750 rpms (assume constant and controlled) ● Output (from winch) ○ F LOAD = 2200 lbs ○ d cable = 0.5 inch (304 stainless steel) ○ L cable = 60 feet (The length of the cable will coil on the drum/shaft) ● Structurally ○ All structural components (i.e. brackets, beams, etc), must have a

    $54 (Avg Bid)
    $54 Oferta Promedio
    13 ofertas

    ...McMaster Carr 5990K312) ○ Pin = 5 hp (max that can be supplied) ○ Win = 1750 rpms (assume constant and controlled) ● Output (from winch) ○ F LOAD = 2200 lbs ○ d cable = 0.5 inch (304 stainless steel) ○ L cable = 60 feet (The length of the cable will coil on the drum/shaft) ● Structurally ○ All structural components (i.e. brackets, beams, etc), must have a

    $97 (Avg Bid)
    $97 Oferta Promedio
    11 ofertas

    ...weight placed on top and the side of the battery (in this instance the solar panels), with the provision, all be a simple nut welded on either side/top of the battery case to fix onto a frame. The outer casing to be made of stainless steel throughout, stainless steel being my preference, hence not rust. The inner insulator if possible to be made out

    $102 (Avg Bid)
    $102 Oferta Promedio
    5 ofertas

    ...machined, to be modified so that it can be manufactured using sheet metal rules (laser/water jet cut, and bending of tabs etc). Current part is 2.5mm thick. Requires change to 304 Stainless Steel 12 Guage 2.657mm standard thickness. Project deliverables: 1. Updated 3D Step file for model. 2. PDF Drawing for inspection of part to handoff to machine shop

    $98 (Avg Bid)
    $98 Oferta Promedio
    46 ofertas

    ...machined, to be modified so that it can be manufactured using sheet metal rules (laser/water jet cut, and bending of tabs etc). Current part is 2.5mm thick. Requires change to 304 Stainless Steel 12 Guage 2.657mm standard thickness. Project deliverables: 1. Updated 3D Step file for model. 2. PDF Drawing for inspection of part to handoff to machine shop

    $120 (Avg Bid)
    $120 Oferta Promedio
    36 ofertas
    Trophy icon Design some Business Cards Finalizado left

    ...follows: Company Name: Whitestone Construction Services Tagline: Projects done right, the first time. Contact: Paul White Role: CEO Address: 5079 N Dixie Highway, Suite 304 Oakland Park, FL 33334 Phone: 954-549-4296 Fax: 954-765-6522 Email: paul@[iniciar sesión para ver URL] Website: [iniciar sesión para ver URL] CGC: 1523477 CFC: 1429615 (The last two

    $35 (Avg Bid)
    Garantizado
    $35
    1 participaciones
    Logo Disign Urgent Finalizado left

    i need logo wich name of smart wifi if i like logo i pay u good price of 304 thnaks i need irgent soon

    $31 (Avg Bid)
    $31 Oferta Promedio
    15 ofertas

    ...manufacturer of Stainless Steel shower drains, looking to establish estimated costs of fabricating gratings our of Stainless STeel sheet. Product: Shower drain Gratings Material: 304 STainless Steel Raw material format: Coils 1.5mm thickness, 9-10cm wide output: Gratings length vary between 50cm, 60cm and 80cm Long Pattern: Small Squares or other

    $54 / hr (Avg Bid)
    $54 / hr Oferta Promedio
    13 ofertas

    need some arrangement for mobile version to be more responsive like [iniciar sesión para ver URL]

    $160 (Avg Bid)
    $160 Oferta Promedio
    18 ofertas
    Trophy icon Business Card Layout & Logo Design Finalizado left

    Hi Guys I have a dog sitting business called Paws For A While. I need the following: * A friendly, appr...Facebook page - [iniciar sesión para ver URL] ---------------------------- Paws For A While Dog Hotel - Yarraville Enquiries: Casey Dean 0403 706 304 casey@[iniciar sesión para ver URL] [iniciar sesión para ver URL]

    $34 (Avg Bid)
    Garantizado
    $34
    59 participaciones
    Do some data entry Finalizado left

    I have a data analysis task. Have survey done on Survey monkey and have SPS...a data analysis task. Have survey done on Survey monkey and have SPSS. Just need data cleaned so it can be analysed, and appropriate analysis done to answer 5/6 objectives. 304 replies to survey. Currently looking at 150+ lines of variances and only 51 questions. Help needed

    $178 (Avg Bid)
    $178 Oferta Promedio
    19 ofertas
    Small Scissor Lift Finalizado left

    ...Base frame dimension - 14" X 24" 2. Load bearing Platform dimension (Frame) - 14" X 24" 2. No. of stages for scissor lift - 2 3. Material to be use - Stainless Steel only (SAE 304) 4. Should be able to raise a load of - 100kg - Load is a rectangular box of dimension (D 24" X W 17" X H 23") 5. Load should be held at any point in the scissor lift height

    $145 (Avg Bid)
    $145 Oferta Promedio
    14 ofertas
    Trophy icon Progettazione Logo Finalizado left

    Il logo dovrà essere progettato con i colori giallo/nero. Preferibilmente sfondo giallo, scritta nera. la Sigla "CNC 304" e l'aggiunta di Beertech. Attendo ulteriori proposte.

    $115 (Avg Bid)
    Garantizado
    $115
    541 participaciones

    PRESHIPMENT INSPECTION IN BUSAN KOREA MATERIAL: PANAX PIGMENT RED 2RM & RED CL-304 Scope of Inspection: - Visual : check material against any possible defects and take several photos of materials directly - Packing : take photos of packing conditions (several photos) - Marking (Brand, Country of Origin, Model Number, …): take photos - Quantity

    $78 (Avg Bid)
    Local
    $78 Oferta Promedio
    1 ofertas

    A mathematical formula for locating the depth of heat for a 2D/3D cuboid AISI 304 structure with dimensions 800mm x 300mm x 100mm with all given parameters after which inserted gives a temperature of 23 - 24 degrees celsius approximately showing that its the hest source

    $171 (Avg Bid)
    $171 Oferta Promedio
    14 ofertas

    ...awg equivalent) Litz Wire. This is a pancake coil design. The following are the specifications: Surface to be heated = 16" Dia. Material = 400 Series steel Housing = 304 Series steel Power Supply = 36v 16a or 12v 20a This coil design will be laid out 3 times before returning to the power supply. Please see drawings. Please also do a calculation

    $163 (Avg Bid)
    $163 Oferta Promedio
    7 ofertas

    ...indicated by If-Modified-Since, return the appropriate Not Modified response (return code 304) If the file has been modified, return the file contents as in step 2 In the case that the named file does not exist, return the appropriate “Not Found” error (return code 404) Simplifying Assumptions: Only GET and Conditional GET requests need

    $26 (Avg Bid)
    $26 Oferta Promedio
    5 ofertas

    ...subscribers from an account. *the Instagram "likes" from the last post Example: (from this account [iniciar sesión para ver URL]) Time: 8:54 AM Followers: 304 Latest Post likes: 32 The graphics should be similar to this counter if possible: [iniciar sesión para ver URL] App Background color should be like this:

    $90 (Avg Bid)
    $90 Oferta Promedio
    10 ofertas

    ...shop to cut the weld my part. I include here the design of my work. It will be created from standard L bars, T bar, metal sheet, and 4 off the shelf casters. The material are 304 Stainless Steel. You need: * Create detail parts to cut the metal bar, metal sheet. * Welding instruction for all the components. * Need detail SolidWorks drawing, and all

    $125 (Avg Bid)
    $125 Oferta Promedio
    43 ofertas

    Hi: This is a re...(Highlight Our Methodology) 11- Message: Cloud Services (Highlight Our Azure & STC) 12- Message: Microsoft Dynamics CRM 13- Correspondence System: [iniciar sesión para ver URL] 14- Lijan System: [iniciar sesión para ver URL]

    $24 / hr (Avg Bid)
    $24 / hr Oferta Promedio
    25 ofertas
    ac loading rig Finalizado left

    ...inlet air temperature. 2. Evaporator: Cooling capacity 10.3 KW. a. Tank & immersed coil system. b. Suitable to run as per 3 capacities at 3 AC compressor speeds. c. Tank in SS 304. d. Coil in copper tube. e. Required capacity immersion type heaters to apply heating load. 3. Refrigeration piping kit for connecting compressor – condenser – evaporator. All

    $131 (Avg Bid)
    $131 Oferta Promedio
    3 ofertas