Rpm buildroottrabajos

i am looking to get a counter timer program written to run off a z80 chip to count revolutions from flow meters up to 720 rpm, and process this to the front end software to display the data recieved! ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only ever exist in one place in the Buyer's environment--Deliverables must be installed by the Seller in ready-to-run condition in the Buyer's environment. b) For all others including desktop software or software the buyer intends to distribute: A software instal...

...class="fmradiolabel">eSATA</label> <br></span></p> <p class="fieldwrap"><label>Umdrehungen</label><span class="fmradio"> <input name="fm_4" id="ab 3.600 rpm" value="ab 3.600 rpm" type="radio"><label for="ab 3.600 rpm" class="fmradiolabel">ab 3.600 rpm</label> <br><input name="fm_4" id="ab 4.200 rpm" value="ab 4.200 rpm" type="radio"><label for="ab 4.200 rpm" class="fmradiolabel">ab 4.200 rpm</label> <br><input name="fm_4" id="ab 5.400 rpm" value="ab 5.4...

We are looking for a developer for a project lasting approximately 1 month. The candidate should be well versed in Linux/RPM packages and Shell Scripting as the installation and uninstallation scripts are Shell scripts deployed in RPM/Deb packages. Part of the project includes getting into the Paralles APS catalog and this requires packaging of an existing application. Information on the program and packaging details are all available from the APS site: Candidate will likely need a knowledge of XML .. however, the package in question uses php, ioncube, javascript. The installer is a shell script, (Bash), and uses the RPM packager, Debian Deb packager, FreeBSD packager. Please place a bid for 1 month and include your CV. More details about the way we

We are looking for a programmer who can build us a a very small project. We want our users to be able to upload archived files such as .7z, .ZIP, .GZIP, .BZIP2, .TAR, .RAR, .CAB, .ISO, .ARJ, .LZHCHM, .Z, .CPIO, .RPM, .DEB and NSIS. And the application you build will automatically un-compress it and give a user files inside of that archive. We will provide more information once you bid on the project.

...openvpn on a centos5.3 clean install server. I can give you ssh access to a test server that i will be installing it on if you wish. I need the rpm (.rpm and location you got it from). setup for openvpn will be server ip openvpn server ip dhcp range 192.168.1.102-110 clients use dns server on local subnet I want logging to be /var/log/openvpn to see login attempts and to use fail2ban to secure so logging needs to be in same format as ssh logging(/var/log/messages) this should not be very hard for the right person and take only a hour or so doc should be like 1-wget 2-rpm -U 3-vi /etc/openvpn/ 4-edit bla bla bla 5- 6- 7-open port x on firewall and forward to server 8-verify you can

We are looking for a programmer who can build us a a very small project. We want our users to be able to upload archived files such as .7z, .ZIP, .GZIP, .BZIP2, .TAR, .RAR, .CAB, .ISO, .ARJ, .LZHCHM, .Z, .CPIO, .RPM, .DEB and NSIS. And the application you build will automatically un-compress it and give a user files inside of that archive. We will provide more information once you bid on the project.

Hello, Work is to design new look for webpage. Url founds from attachment. Some "speedometer" or RPM meter theme would be nice. Some not real looking, cartoon type would be nice. Or is it caricatyr style? Quick mock-up would be nice. TOM ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only ever exist in one place in the Buyer's environment--Deliverables must be installed by the Seller in ready-to-run condition in the Buyer's environment. b) For all others including desktop sof...

I tried to compile BIND 9.7.0b2 on Centos 5.4, but its proving to be difficult. I want to hire someone to create an RPM for this version of Bind, INCLUDING all of the dependencies it needs. This will be installed on a clean version of Centos 5.4 (I know fedora has it, not interested in fedora)

We need a PMS (Property Management System)? Interface written to communicate between a DMOD (Digital Movie on Demand system). This would ideally take the same framework as? a previous interface we have had written (source code and docs for this can be supplied to developer),? however communiation between the DMOD Interface Linux sever, an...interface protocol which I can supply. Unfortunately this time around we don't have a PMS? emulator so testing has to be done at this end? via the PMS provider, which can? take some time to schedule testing and get results? so? the ability to read and clearly understand the technical document is important. Deliverables for this project will be in the form of full coommented source code along with RPM binaries suitble for a Linux? RHE...

...is best that you use PEAR or you distribution to manage libraries instead, as they tend to provide security updates faster, and may offer improved performance. On Debian based distributions, such as Ubuntu, use a package manager (such as "aptitude", "apt-get", and "synaptic") to install the package listed. On RPM based distributions, such as Red Hat, Fedora, CentOS, Scientific Linux, Yellow Dog Linux and Oracle Enterprise Linux, use a package manager (such as "yum", "apt-rpm", and "up2date") to install the package listed. On servers without a package manager (such as Windows), or if the library is not packaged for your distribution, you can use PHP's PEAR to install the library. Simply run "pear...

qmail is the problem cannot receive mail and cannot send mail from webmail, pop3 is ok, but smtp not working also currently qmail is shutting down from time to time without reason we tried to uninstall qmail uninstall of current version using "yum" h --nodeps parameter to uninstall it rpm -e --nodeps qmail_package_here that is the command we used to uninstall qmail and that has issue started

...inputs is RPMs from a motor. 8 inputs and 1 output to control the actuator. The software is pretty simple. Controller receives the inputs from the sensor and the motor's RPM. Then turn the actuator on or off. It will control the actuator depending on which sensor is activated. There will be 16 different possibilities. Please look at information file for better understanding how the software works. The dark green boxes are the signal which will decide if actuator is on or off. I would like to be able to scrow up and down though the situations and adjust which sensor would be on or off. Also, change the RPM values per situation. Thank you for the interest. Additional information: Actuator Controller Software: The software must control the ac...

...Powerful reliable and fast Python mail script to be created for mass mailing OPT-IN emails and Newsletters. Creating a unique MTA more indebt then QMail or a (Twisted-based MTA). Regular Mailer Options need to be implemented along with a few more options. Option to retrieve sourced email list and proxy list from url/csv/txt file and multiple sessions. I would like to be able the speed of the mailer RPM Rate Per Mintue/Hour. Along with veiwing the mailers speed. Option to modify the entire header or leave as is using with or without DomainKeys/SPF. Web-based Gui of some sort will need to be made to control and change settings with mail script. Implememitation of Unsubscripe-Suppression options etc. Please have experience creating one of these scripts. We can chat more in dept abou...

...produce articles on various articles very similar to Linux How to documents. Reference is given here: Each articles needs to be written a a way it should not violate any copyright and by following these documents any user should be able to achieve the goal. Each arcticle would be having at least 2500 words.? (1) How to setup and use RPM on Linux. Sample is <> Rest of the articles would be written in the similar way: (2) How to setup and read/write a CD on Linux. (3) How to setup and use SAMBA server on Linux. (4) How to setup and use SVN source code control version on Linux (5) MP3 Player Box and listen music on Linux. (6) Setup the Modem to do Dial-up Networking with remote server (7) How

Por favor, regístrate o inicia sesión para ver los detalles.

...Powerful reliable and fast Python mail script to be created for mass mailing OPT-IN emails and Newsletters. Creating a unique MTA more indebt then QMail or a (Twisted-based MTA). Regular Mailer Options need to be implemented along with a few more options. Option to retrieve sourced email list and proxy list from url/csv/txt file and multiple sessions. I would like to be able the speed of the mailer RPM Rate Per Mintue/Hour. Along with veiwing the mailers speed. Option to modify the entire header or leave as is using with or without DomainKeys/SPF. Web-based Gui of some sort will need to be made to control and change settings with mail script. Implememitation of Unsubscripe-Suppression options etc. Please have experience creating one of these scripts. We can chat more in dept abou...

...a utility capable of scanning, identifying, and clearing OBDII trouble codes on BlackBerry. If successful, we will consider developing the same application for iPhone. For our second project, we will make a utility similar to "Rev" for iPhone (), allowing the user to log data during race track laps, show instant gauges of fuel consumption, MPH, RPM, Boost, Throttle Position, Fuel Pressure, Coolant temp, etc etc. This program will most likely include the first program's functionality (plus the added features), so we will want to work with the same developer. SDK's for the hardware will be provided to the programmer, and assistance with GUI's as well, but I am not a programmer, so I will not be able to assist in the technical aspect. We need

...is best that you use PEAR or you distribution to manage libraries instead, as they tend to provide security updates faster, and may offer improved performance. On Debian based distributions, such as Ubuntu, use a package manager (such as "aptitude", "apt-get", and "synaptic") to install the package listed. On RPM based distributions, such as Red Hat, Fedora, CentOS, Scientific Linux, Yellow Dog Linux and Oracle Enterprise Linux, use a package manager (such as "yum", "apt-rpm", and "up2date") to install the package listed. On servers without a package manager (such as Windows), or if the library is not packaged for your distribution, you can use PHP's PEAR to install the library. Simply run "pear...

...different distributions and architectures, I'm looking for a coder to create an installer for me. The ideal installer would have two versions (a 32 bit and 64 bit) and target all distributions, providing the required libraries (in the same way as the other binary distributed programs such as Codeweavers Crossover). I realise that this may not be possible so I will also consider offers to create RPM and DEB type packages. The final deliverable will be installers for the following distributions (32 and 64 bit where available) alongside the 'source' and build instructions for those installers: Mandriva 2009 Spring (K)Ubuntu 9.04 Fedora 11 OpenSUSE 11.1 The program is explicitly dynamically linked against the following libraries using pkg-config:...

We have a J222 web application that ? can be deployed to tomcat application server. Deploying the j2ee application (WAR) file involves several steps like copu WAR to webapps, copy few jar's to tomcat lib directory, change some parameters in and few additional steps. We want to create RPM package of our j2ee application, so that it can be distributed as rpm file. This rpm file can have dependency on tomcat, jdk installed packages. Please let us know if you have any additional questions. Thanks.

...brake or does not accelerate quickly enough he will not reach top speed. He also loses speed if after he shifts through all the speeds he does not put Rollie into the prone position quickly enough. In the upper right hand portion of the screen there should be a small speedometer showing speeds from zero to 200 MPH and a small tachometer. The tachometer should show zero to 10,000 RPM and have redline on it at 8500 RPM. The redline is that maximum point at which the racer should shift to gain the maximums speed. There should be five speeds altogether. It should be impossible for the racer to break the 150.313 MPH mark but it should be difficult if they do not do all the things correctly and in the correct sequence. If the racer stays in a gear for too long and excee...

...brake or does not accelerate quickly enough he will not reach top speed. He also loses speed if after he shifts through all the speeds he does not put Rollie into the prone position quickly enough. In the upper right hand portion of the screen there should be a small speedometer showing speeds from zero to 200 MPH and a small tachometer. The tachometer should show zero to 10,000 RPM and have redline on it at 8500 RPM. The redline is that maximum point at which the racer should shift to gain the maximums speed. There should be five speeds altogether. It should be impossible for the racer to break the 150.313 MPH mark but it should be difficult if they do not do all the things correctly and in the correct sequence. If the racer stays in a gear for too long and exc...

...project is to implement Alfresco v. 3.2 Community Edition ECM & WCM () on our CentOS 5.x (non-gui) server through remote ssh login. You will have to give an IP address from where you will login, for adjustment to our firewall. If you are on a dynamic IP, we may have to do this every time you change IP. RDBMS to be used is postgreSQL latest stable release preferably using the rpm version available at their site. If you need to custom install, you will have to give reasons for doing so and if they are acceptable, you may build custom postgreSQL rpms on our server. You will first install and test everything at your end and then build it on our server. Since community editions are a daily build, you are to pick your day and then correct that build, rather than choosing

...ability to simply bridge 1 or more IP address from one interface to any Vlan (this feature is available with Vyatta GUI, but is needed for the NON-technical) 6) The Ability to add and view a list of IP address that are available to use in feature (5) and know which vlan is using which IP address (this is done easily with use of database) 7) the ability to update the software remotely ( with rpm packages, ETC... ) 8) The system must be able to install itself from cd after all testing is done. 9) Finally the system must be able to check remote web address after install for license to run, every month. I will answer any questions Via PM :) This requires knowledge of MSQL (or other database) LUNIX PERL or PHP (PHP perfered for project) This project is needed ...

...yet) 2. If 5 speed is selected, then the choices on the 5 speed spreadsheet apply -- items listed under GT40, Pantera, M1 are standard, but other options exist and other vehicles could apply (Quaife site's calculator lists other vehicles, we could offer "other"). 3. Next item should force consumer to input their "Tire diameter" (ratio selector sheet) 4. Then the "shift rpm" is input by consumer. 5. Next, the consumer can select, via radio buttons, gear ratios (ie. 1st gear, 2nd gear, etc.) -- the gear ratio options are listed on the 5 speed and 6 speed spreadsheets: see "1st gear" listing where 4 options are offered (on left side of sheet) for 1st gear, 9 options for 5th gear, etc. Right side of sheet lists 'standards' f...

...don't have numbers for that yet) 2. If 5 speed is selected, then the choices on the 5 speed spreadsheet apply -- items listed under GT40, Pantera, M1 are standard, but other options exist and other vehicles could apply (Quaife site's calculator lists other vehicles, we could offer "other"). 3. Next item should force consumer to input their "Tire diameter" (ratio selector sheet) 4. Then the "shift rpm" is input by consumer. 5. Next, the consumer can select, via radio buttons, gear ratios (ie. 1st gear, 2nd gear, etc.) -- the gear ratio options are listed on the 5 speed and 6 speed spreadsheets: see "1st gear" listing where 4 options are offered (on left side of sheet) for 1st gear, 9 options for 5th gear, etc. Right side of sh...

We need a centralized control uni...from the MCU) Power factor correction (active or passive) Programmable current limit from 0-50A Programmable charge profile (CC/CV limits) Motor Controller: 400A peak IGBT 3 phase AC output (variable frequency up to 400Hz) Hall Effect and optical encoder support 0-5k potentiometer speed/torque control Regenerative braking (programmable aggressiveness) Programmable control profile (max RPM, PID acceleration/deceleration profile, motor parameters, etc.) By our estimation the only hardware that should require any significant design should be the gate drivers for the IGBT and the regeneration circuit. The charger and the converter should be fairly trivial (for an electrical or electronics engineer) since they are directly controlled b...

...root 3. Determine the UNIX Operating System of the server (AIX, Linux, HP-UX, Sun) 4. Based on the Operating System capture the following command output to a text file named after the server being scanned. a. AIX commands: uname -n, lsdev -Cc processor, lparstat -i, lsattr -El "proc0", prtconf, ps -ef, lslpp -l b. Linux commands: uname -n, cat /proc/cpuinfo, vmstat, ps -ef, rpm - qa, cat /proc/devices, ps aux, c. HP-UX commands: uname -n, usr/sbin/ioscan -fnC processor, /usr/sbin/ioscan -fnkC processor, vparstatus, swlist d. Sun commands: uname -n, psrinfo -v, psrinfo -pv, prtconf -vpPD | grep i- "sparc", prtdiag, pkginfo -i, ps -ef, ps aux 5. Move to the next server in # 1 and loop thru the list Additional Requirements: 1. Erro...

...(active or passive) Programmable current limit from 0-50A Programmable charge profile (CC/CV limits) Motor Controller: 400A peak IGBT 3 phase AC output (variable frequency up to 400Hz) Hall Effect and optical encoder support 0-5k potentiometer speed/torque control Regenerative braking (programmable aggressiveness) Programmable control profile (max RPM, PID acceleration/deceleration profile, motor parameters, etc.) By our estimation the only hardware that should require any significant design should be the gate drivers for the IGBT and the regeneration circuit. The charger and the converter should be fairly trivial (for an electrical or electronics engineer) since they are directly controlled by the MCU...

We are a small interactive marketing company that will be providing some graphics design. ? We are growing quickly? and subletting smaller quick jobs will free us up for bigger jobs. ? We are looking for a long term relationship for several jobs a month. ? Some will have short dead lines and some will not. ***I need 3 logos designed right away.***? One for our company, RPM Solutions and two for our clients which are automobile dealerships. Please provide samples of logos you have designed. ? Keep in mind I am looking for a long lasting relationship with many more jobs in the near future. Regards, RL

I need URGENTLY a simple movie done with Flash or SwishMax exactly like this one: I will provide all the images and text, i just need them to appear exactly like they do there. And i need those orange lateral buttons too. I need this done in few hours!!! ## Deliverables i will provide immediatly all the images and text to the winner bid!

...really cool and it works great in ruby 1.8.6. But it doesn't work in ruby 1.8.7, which is what our organization uses. The patch fails with a message about several heaps not applying cleanly. That's the problem that we need solved. It We need the patch to be ported to ruby-1.8.7-p174. The code (which is written in C, NOT ruby) must compile and run on centos 5.3 (it will be applied with an rpm build process). After applying it we must be able to see stats for both GC and ObjectSpace using following commands in ruby: GC.enable_stats GC.disable_stats GC.clear_stats stat_string = description + ": " stat_string += "allocated: #{GC.allocated_size/1024}K total in #{GC.num_allocations} allocations, " stat_string += "GC calls: #{}, " ...

La base de datos es para un taller de reparación de motores eléctricos que tiene muchos cuadernos de varios años con datos de motores? y cada motor tiene varias especificaciones, ejemplo: voltaje, HP, amperaje, rpm, diámetros, cliente, fecha, diagramas ,fotos (por lo menos? 3 fotos) etc., se necesita? motores de búsqueda atraves de las especificaciones se vayan filtrando hasta llegar al? dato deseado, la pagina de las especificaciones deben caber en un pagina a4 para luego imprimirlos solo en blanco y negro. El programa ? hacerlo en SQL server, visual Basic, debe tener una vista profesional, ordenado, fácil de leer y usar, por que en un futuro los datos? se? necesitara en pagina de internet. el programa debe tener? una opcion en donde se...

I have a mysql table having productid and features. The features has info like Western Digital WD1600YS Hard Disk Drive. 400GB Hard Disk Drive. 7200 RPM spindle speed. Reliability in high duty cycle environments. Built to last. RAID-specific time limited error recovery. Fluid dynamic bearing (FDB) motor. Improved power controller. Data Lifeguard Tools. FlexPower. Hot plug support. Backplane compatibility. SATA latching connector I want a query that change this paragraph to bullets format It should be changed to •Western Digital WD1600YS Hard Disk Drive •400GB Hard Disk Drive •7200 RPM spindle speed •Reliability in high duty cycle environments •Built to last •RAID-specific time limited error recovery •Fluid dynamic bearing (FDB) motor •I...

Need website developer with experience in php and coldfusion to complete website. Website is 85% complete. Looking to enhance the advance search engine, fine tune registration, label various sections of website, fix any present errors, and add a sectio...website. Website is 85% complete. Looking to enhance the advance search engine, fine tune registration, label various sections of website, fix any present errors, and add a section to website.? ## Deliverables Work will be done on a dedicated server. The company requires information on web developer.? Server Specs * Intel Pentium D 3.2GH **Processor** * Seagate ST3250820AS / 10K RPM / 250GB / 80pin SCA / 73 Gb SCSI **Hard Drive** * Seagate ST3250824AS / 250 GB SATA **Hard Drive** * Crucial DDR2 - 667 - 512MB ...

We build Website and like to have flash banners on front page you can see a s...here. We take a photo and wnat you to render a line drawing , then reverse the order so that the line drawing morphs into the photo see examples: ? More advanced would be some creativity of morphing several Images together with key marketing words, which would be a higher cost to me. eg: High potential for many work orders to sucessful applicant ## Deliverables ok here is a ROUGH example of a typical banner I provide the House image your render the line drawing similar to the samples on previous page ? I may ask for a logo to be created.. that would extra value to you

...similar. Be sizeable, with an easy way such double click back to default size and location. Maintain correct aspect ratio on sizing Be able to 'stay on top'. Be able to 'lock on to the position of an x window application' e.g. always show up in the left bottom corner of that app. It needs to run under RHEL 5.3 ADDED: RHEL does not have the usbvision package that contains the drivers. I would prefer a rpm that installs all the necessary components, but detailed instructions would be fine. The capture device is a Belkin video bus II and it is supported on other Distros. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, ...

Linux server setup on a new CentOS Server. Please review the details for the exact requirements. Note: You will provide a "" file at the end of the project that includes all install related actions such as wget, tar, rpm, apt, yum, adduser, configure, make, and other commands related to the install. This will be used to setup the backup server. 1- Download and compile the latest ImageMagic, Ghostscript, Unrar, Par2, xPdf, Apache2, Mysql, PHP5 and Python in /usr/local/src. Include OpenSSL, Curl, GD, and crypto extensions in PHP. 2- Update Perl's CPAN to the latest version. Install Bundles for Mysql, ImageMagick, Web Scraping (LWP/Data Dumper/etc) 3- Install Zimbra and configure for the correct domain. Configure for nightly backups using zimbaColdBac...

I love the pidgin plugin "pidgin-festival" - Unfortunately it does not work properly on Ubuntu 8.04 or Fedora 10. I reported this bug (see here: ) but seems like the developers do not update this any more. I dont have the ti...would like to have it fixed. I am requesting a bid for someone to: 1) Fix this bug (ie make sure that this pidgin-festival plugin works) 2) Create a tar ball that allows the installation in Fedora 10 and up and Ubuntu 8.04 and up. 3) OPTIONAL: Take over (not sure if it is possible) or create a separate project to to this so that everybody can have access to it 4) OPTIONAL: Create a rpm and deb for an easy installation.

Ok while doing some lib upgrades my server went down and now I am facing a really confusing situation. this will tell u :- -bash: /usr/bin/yum: No such file or directory root [/etc]# wget -bash: /usr/bin/wget: /lib64/ld-linux-x86-64.so.2: bad ELF .../usr/bin/yum: No such file or directory root [/etc]# wget -bash: /usr/bin/wget: /lib64/ld-linux-x86-64.so.2: bad ELF interpreter: No such file or directory root [/etc]# scp -bash: scp: command not found root [/etc]# tar -bash: /bin/tar: /lib64/ld-linux-x86-64.so.2: bad ELF interpreter: No such file or directory Now the DC is not responding to my tickets. Is there anyway you can use to get rpm and yum reinstalled ? Options I have :- KVM Boot from the network. Is there a geek around who can get this fixed ASAP. ...

...:%s/dog/cat/g :10 dd :q! :wq pico host -t mx,-t text host hostname DNSserver nslookup traceroute arp -v df -h, -i du -s,-h dmesg -c date -s clear exit reboot halt -p shutdown -tn0 now chmod -r chown -R chgrp -R wget -O lynx lsof -p strace -p history whoami hostname pwd su wc -l.-b,-m,-w cat file |wc ??"l sort -n service ps a, u, x ping -c kill -9 killall -9 locate updatedb touch chattr -i,+I lsattr rpm -ivh,-e, -qa yum -y mail cat file |mail email@domain ??"sSubject write wall w finger nohup sudo scp -r,-p rsync -a,-z,-e ssh find -maxdepth,-name,-user,-perm replace sed awk | awk {‘print $n’} ssh user@ip tar -xzvf,- czvf gzip unzip ifconfig how to read the output if fine, don’t show adding/removing ips passwd why to use /bin/passwd instead of just passw...

Server Admin Linux Need server administrator experieced and qualified to work on network of cPanel servers Your first project will be to help configure a new server just put online, bid for work on this server only. The server specs are: Dell 6 Drive Max Drive Bay for 2950 Dell 9G Drive Controller - SAS (2)146 GB 10K RPM SCSI/SAS HDD Dell 1066/1333FSB Dual Xeon PowerEdge 2950 Intel 3.0GHz 1333 FSB - Harpertown Xeon 5450 Quad Core Intel 3.0GHz 1333 FSB - Harpertown Xeon 5450 Quad Core 4 GB RAM IPMI Urchin Stats cPanel/WHM with Fantastico CentOS Enterprise Linux - 4.x - 64 bit 1000 Mbps Uplink Virtual Rack Backend Connection Before we go into the details of what we want done please note you will be paid "net 10" for this and all future projects, no es...

hi i need VNC server installing on my dedicated server, its an rpm file and need installing via ssh on my linux (fedora) machine...5 min job for a linux expert thanks chris

...must be able to edit, delete or block/stop auctions and users. They can also change the packages options and can completely control the auction process. the Website will be designed to work with the following web browsers: System will be fully compatible with all standard browsers, i.e Explorer, Firefox, Google Chrome. High speed dedicated server with minimum capecity of 160GB 10,000 RPM Raptor 2.4 GHZ+ Intel Quad Core Processor? Minimum of 8GM of DDR Ram? Unlimited per month Bandwidth? Microsoft Operating System Latest versions of PHP and mySQL ## Deliverables We need the web design to be to the same standard as these 2 sites but we are not looking for a copy of any sort. All the work must be done by yourself and your assosiates and all the rights wi...

...to be at least 1000 words. Commands (should include but not neccessarily be limited to): cd ls;ls -al;ls -i mkdir rm mv cp grep less head tail man top cat netstat whois uname vi pico host nslookup traceroute arp df du dmesg date clear exit reboot halt shutdown chmod chown chgrp wget lynx lsof strace history whoami hostname pwd su wc sort service ps ping kill killall locate updatedb touch chattr rpm yum mail write wall w finger nohup sudo scp rsync find replace sed awk ssh user@ip tar gzip unzip ifconfig passwd which whereis chkconfig mount fdisk e2fsck The latter topics should cover harder items such as: shell scripting using awk & sed Common files,directories should be covered, IE: /etc/hosts /etc/ root level directories, /etc, /var, /usr, /tmp, /root, etc .ssh/ .bashrc .pro...

...to be at least 1000 words. Commands (should include but not neccessarily be limited to): cd ls;ls -al;ls -i mkdir rm mv cp grep less head tail man top cat netstat whois uname vi pico host nslookup traceroute arp df du dmesg date clear exit reboot halt shutdown chmod chown chgrp wget lynx lsof strace history whoami hostname pwd su wc sort service ps ping kill killall locate updatedb touch chattr rpm yum mail write wall w finger nohup sudo scp rsync find replace sed awk ssh user@ip tar gzip unzip ifconfig passwd which whereis chkconfig mount fdisk e2fsck The latter topics should cover harder items such as: shell scripting using awk & sed Common files,directories should be covered, IE: /etc/hosts /etc/ root level directories, /etc, /var, /usr, /tmp, /root, etc .ssh/ .bashrc .pro...

...desktop) All System Files must be in the following locations /System/etc /System/Xwin /System/bin /System/Scripts /System/Drivers /System/Server /System/Drivers/Filesystems/* /System/Var /Applications/* /Applications/Common /Applications/<TargetApp) /Volumes/<Harddrive Label> *like macos Fast Booting, 5-15 seconds custom boot screen Fully Silent kernel no RPM, Custom Install Manager will be authored eventually the root filesystem will not have legacy directories except if absolutely necesary. (No Var, Opt, Etc sbin, etc) System Must derive all Configuration data from the /System/etc directory System Must Support Quick Start after Installation (Hardware will not change following the initial setup) ## Deliverables ...

...completely control the auction process. the Website will incorporate the following Third Party Works: Merchant Account, Payment Gateway, SMS API Server, Hosting. the Website will be designed to work with the following web browsers: System will be fully compatible with all standard browsers, i.e Explorer, Firefox, Google Chrome. High speed dedicated server with minimum capecity of 250GB 10,000 RPM Raptor 2.4 GHZ+ Intel Quad Core Processor Minimum of 8GM of DDR Ram Unlimited per month Bandwidth Linux Operating System Latest versions of PHP and mySQL...

I need ffmpeg, mencoder and lame installed on a newly installed Red Hat Enterprise server. I've tried to install the modules with yum, but am getting dependancy errors. My expertise is in Debian and I don;t have the time at the moment to understand the rpm system. I need this job completed within 24 hours.

I would like to package Smedge 3 into a more standard delivery and deployment system, primarily an rpm, but also available as a deb if possible. The product is currently only available as a 32 bit application. It would be great if the rpm and deb could include all the necessary 32 bit run time library dependencies, so users get all required libraries installed automatically if needed. (Maybe optionally for the GUI components, so it can still be installed as a daemon on machines without GUI.) The installer should include 3 packages: required: smedge3 This package installs the program files and sym links and mojo required for GUI shell integration (both GTK and KDE if possible). optional: smedge3-engine This package installs and starts the SmedgeEngine.d daemon included in the ...