The term CAD/CAM denotes computer aided design and computer aided manufacturing. It is usually referred to in the context of software tools that perform a wide range of engineering functions. Selecting a proper CAD/CAM system is important to ensure that the stages of conceptualization and final production are under proper control. If you are foraying into computer-aided design and manufacture, you need an expert. There are many freelancers who can do this job for you at a relatively low cost. So, post your CAD/CAM job here and make your life easier! Contratar a CAD/CAM Designers

Filtro

Mis búsquedas recientes
Filtrar por:
Presupuesto
a
a
a
Tipo
Habilidades
Idiomas
    Estado del trabajo
    97 trabajados encontrados, precios en USD

    Your task is to design new gearbox and perform the Modal , Transient, Contract stress and Time varying mesh stiffness analysis.

    $149 (Avg Bid)
    $149 Oferta Promedio
    12 ofertas

    We have an existing 3D model in Solidworks that needs to be modified. Should be about 5-6 small edits. Final file must be factory ready and ready to use to open tooling. NOTE: Must be experienced with footwear sole design. Must be experienced with Solidworks.

    $10 / hr (Avg Bid)
    $10 / hr Oferta Promedio
    39 ofertas

    Need plans for aluminum trailer to carry 3000lbs 14 feet long x 6.5 wide

    $401 (Avg Bid)
    $401 Oferta Promedio
    26 ofertas

    we neeed basic shapes made in inventor or cad 3d design.. basic metal shapes or plastic rubber shapes should be able to finish each design in less than 11 clicks more or less if u have learned well.. please know what u are doing thanks we always have fast easy 3d design jobs.... pay per job

    $5 / hr (Avg Bid)
    $5 / hr Oferta Promedio
    23 ofertas

    I want someone who can do Engineering work for me. It needs to be done ASAP

    $22 (Avg Bid)
    $22 Oferta Promedio
    22 ofertas

    I have some from 3D solidwoks file to 2D Autocad files. Now There are a few

    $29 (Avg Bid)
    $29 Oferta Promedio
    71 ofertas
    Whittingham Circuit -- 2 6 días left
    VERIFICADO

    We have current residential cad files and require floorplan changes and elevation changes. There are 6 identical joined terrace style townhouses in 1 line. Lots 17-22 I need the following changes: Use Unit 17 upstairs design for upstairs of all units and Unit 18 design for downstairs of all units Flip every second house horizontally and keep joined on bathroom and kitchen side. All Garages to re...

    $11 / hr (Avg Bid)
    $11 / hr Oferta Promedio
    23 ofertas
    CAD CAM SERVICES 6 días left
    VERIFICADO

    I want to design a mould for plastic enclosure

    $16 (Avg Bid)
    $16 Oferta Promedio
    29 ofertas
    Fire Doors 6 días left

    I have some floor plans but need to add room numbers to the plans. There is 400 plus room numbers. It’s just adding numbers to existing plans

    $369 (Avg Bid)
    $369 Oferta Promedio
    23 ofertas

    We want to add an inflatable pool at the roof/terrace but bit scared the weight is too high. The measurement are 2m wide, approx 70 cm high and Volumen approx 900-1000L water. Any idea?

    $20 (Avg Bid)
    $20 Oferta Promedio
    26 ofertas

    Hi Vishwsaar G., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $23 / hr (Avg Bid)
    $23 / hr Oferta Promedio
    8 ofertas

    I would like someone to give us some ideas on landscaping our property. The house is already built. The property is in Beaconsfield, Victoria, Australia on a 1350m2 block of land on a steep slope (1:4). The Lanscape architect does not have to know local plants as we can always go to a local nursery and ask for advice. We are just after a workable layout that would not cost a fortune. There is also...

    $255 (Avg Bid)
    $255 Oferta Promedio
    51 ofertas

    CAD drafter needed to create slip sheets for shop drawings on commercial construction projects

    $157 (Avg Bid)
    $157 Oferta Promedio
    45 ofertas

    I'm looking for a concept or idea for a simple shoe design that allows you to have 1 shoe sole and be able to attach different top layers to the sole. So you can attach flip flops, you can attach hoes shoes, and you can attach dress shoes. I've sketched a concepts and included them in this brief, but I hope you can come up with a few other ideas too. The best idea wins.

    $100 (Avg Bid)
    Urgente Garantizado
    $100
    46 participaciones
    Multi-functional dispenser 6 días left
    VERIFICADO

    We are developing a multi-functional dispenser. Are you skilled and knowledgeable in HDPE blow molding and PP injection molding? We need industrial design and plastic engineering. Thank you, Peter

    $45 (Avg Bid)
    $45 Oferta Promedio
    7 ofertas
    Build me a UAV 6 días left
    VERIFICADO

    I need a UAV drone built on Catia or solid works. with a maximum take of mass of no more then 6.9Kg. The UAV should have all the subsystems included in the design such as the propeller and landing gear etc... The design should include a storage for a care package and release mechanism like the image attached. I will require a full technical drawing of the UAV as well.

    $335 (Avg Bid)
    $335 Oferta Promedio
    19 ofertas

    Need a structural engineer to provide stamped structural drawings of a picnic pavilion to be constructured in Baltimore County.

    $2053 (Avg Bid)
    $2053 Oferta Promedio
    14 ofertas

    I have 3 Solidworks part files. I need Autocad drawing from Solidworks part file. I am looking for a man who know Autocad.

    $31 (Avg Bid)
    $31 Oferta Promedio
    102 ofertas
    Plant GMP Compliance 5 días left
    VERIFICADO

    Our company is heading for the construction of a new facility which will require full Eu-GMP compliance. For this first stage of project, we are looking for an engineer which is proficient with GMP requirements, and will be able to deliver the following: - Review of drawings to make sure that the PAL/MAL and various parts are planned correctly for various BSL levels, to avoid mixups and cross-con...

    $295 (Avg Bid)
    $295 Oferta Promedio
    6 ofertas

    I need a rotary post processor for Vectric Aspire software The CNC control is a Syntec 6mb

    $555 (Avg Bid)
    $555 Oferta Promedio
    4 ofertas

    The drawings for an electric actuator should be illustrated with a brief description of the linear actuator. The description should provide a brief overview of the linear actuator function or purpose. Each of the mechanical part(s) or assemblies must be effectively illustrated using isometric or perspective views, sectional views or cut-aways. All the features of the linear actuator and housing sh...

    $109 (Avg Bid)
    $109 Oferta Promedio
    29 ofertas
    Watchdogeye 5 días left
    VERIFICADO

    I am a medical device developer always searching for new ideas and new concepts I need an electronic engineer and a PCB developer to design a miniature PCB battery powered containing a Proximity distance sensor, all of the components should be shelve items The PCB size should be Appx 1"x1" Sincerely

    $1116 (Avg Bid)
    $1116 Oferta Promedio
    26 ofertas
    Trophy icon Food Truck Design 2 5 días left

    CONTEST REPOSTED BECAUSE PAST POSTING DID NOT HAVE THE EXAMPLE IMAGE. PLEASE MAKE YOUR DESIGN BASED ON THE STRUCTURE OF THE CART ATTACHED. We are manufacture of technical furniture such as lab furniture, ESD workbenches etc. We seek experience product designer to design a 2 wheels motorcycle food cart . Requirement, attractive, user friendly, lightweight, smart design, please refer to samp...

    $100 (Avg Bid)
    Destacado Garantizado Sellado
    $100
    13 participaciones

    I want to design a Rotating Shelf with 4 racks which should be revolve horizontally driven by either on Hydraulic or pneumatic system. I want the following 1) Structural design of the Frames 2) Sprocket and Chain design 3) Chain Joining Member with Racks 4) Complete Drawing 5) Simulation Thanks & Regards,

    $430 (Avg Bid)
    $430 Oferta Promedio
    22 ofertas

    Suche CAD-Bautechniker für die Erstellung von Einreichplänen auf Basis von bereits vorhandenen Hallenplänen. Auftrag besteht aus der Herstellung der erforderlichen Einbauten wie Betonbecken und deren technische Einbauten wie Filteranlagen, Moving Bed Filter, technische Versorgung mit Druckluft und Sauerstoffzuleitungen, elektrische Versorgung.

    $30 / hr (Avg Bid)
    $30 / hr Oferta Promedio
    10 ofertas

    The building is a small mixed use residential building in the UK: 5 flats above & commercial with a basement below In the case of the fire strategy: we had already issued fire strategy drawings which we deemed to have been accepted by Building control, and implemented many measures therewith However it needs editing by a specialist since it was produced by an architect. the sticking point ...

    $220 (Avg Bid)
    $220 Oferta Promedio
    16 ofertas
    wood toy designs 5 días left
    VERIFICADO

    i have wood toy making factory where i wanted to introduce new designs to market, these has to be educational toy designs. looking for capable individuals with talent to get designs with technical drawings

    $32 (Avg Bid)
    $32 Oferta Promedio
    38 ofertas

    I need a CAD 3D Modeling artist to do a pendant design. Pretty simple one and I need the file as .STL. It is for 3d printing. Thank you!

    $21 (Avg Bid)
    $21 Oferta Promedio
    80 ofertas

    Installing a 15 foot wide sliding glass door in an exterior wall. I will need plans to submit to city that will include structural engineer plans for a glulam beam to be installed above the door.

    $450 (Avg Bid)
    $450 Oferta Promedio
    27 ofertas
    Sliding door 5 días left

    Need Plans for a 15 foot wide sliding glass door install. It is on an exterior wall of a block home. So will need to install a beam above.

    $371 (Avg Bid)
    $371 Oferta Promedio
    38 ofertas
    Kennett1842 5 días left

    Here's what we need: Hall Barn Doors: We need to remove the barn doors and brackets and replace with the folding doors. We need a shot from both sides of the barn door. Barn Door BR 1: We need to remove the brackets and extra molding holding the bracket (on the right side) and replace with the door having hinges like the BR Model Door. Back Deck: We need to paint the back deck the same...

    $410 (Avg Bid)
    $410 Oferta Promedio
    28 ofertas
    Rotary post processor 5 días left
    VERIFICADO

    I need a rotary post processor for Vectric Aspire software The CNC control is a Syntec 6mb

    $422 (Avg Bid)
    $422 Oferta Promedio
    7 ofertas
    $18 / hr Oferta Promedio
    10 ofertas

    Need to Make B.O.Q from Drawings in PDF version; Scope of Work:- -Chilled Water System -Drainage -Fire Fighting (FM200) -Water Supply by Copper -Below is the link of Drawings [iniciar sesión para ver URL]!7NsHUZBS!HuOtYSrllr14IpvdPgXrhTi2FEtTzIR7C_oA7L7r5Qg

    $10 (Avg Bid)
    $10
    2 participaciones

    Design heat shields for exhaust components such as manifolds and exhaust pipes. The shields consist of metal foil, two layers with insulation material in the middle. The designer models over a solid object such as an exhaust manifold or pipes with complex planes and geometry with the ability to blend different planes together creating an inner component that closely models the shape of the solid,...

    $139 (Avg Bid)
    $139 Oferta Promedio
    34 ofertas

    I need to convert 3 PCBs from kicad to fusion 360 (Eagle) format. I need all the custom components in the library and all related 3D models in fusion 360 All size, route and position of the circuit and the that of components must be exact the same after conversion. In short, the circuit must be the same after conversion.

    $31 (Avg Bid)
    $31 Oferta Promedio
    11 ofertas

    We need someone that can design us a venturi that can draw smoke out of container by using compressed air into a tyre. It will involve different CFM's or air flow and be able to fill multiple sized tyres Must have CFD and CAD design experience

    $414 (Avg Bid)
    Acuerdo de Confidencialidad
    $414 Oferta Promedio
    23 ofertas

    I need a simple half Spherical Cap in next 1 hour or So. It is a super simple work, I need it as .STL It just half a spherical shape. More details on chat. Only bid if you can do it in next few hours! Thank you!

    $14 (Avg Bid)
    $14 Oferta Promedio
    48 ofertas

    Please contact who is willing to give training on CAD Designing tools specifically Sketchup

    $13 / hr (Avg Bid)
    $13 / hr Oferta Promedio
    38 ofertas

    i need software developer for AUTOCAD , PLUG IN APP DESIGN

    $92 (Avg Bid)
    $92 Oferta Promedio
    5 ofertas

    Need a structural/marine enginner with strong skills in 3D model and strcuctural analysis softwares. Following are the scope of Works. 1. Extract information from the given drawings and create a structural model for analysis. 2. Analyse the structure with given load and generate reports on final results. 3. Provide suitable changes in the model if the structure fails. Note : The structure (Clam...

    $197 (Avg Bid)
    $197 Oferta Promedio
    24 ofertas

    i want autocad designer for some building drawing

    $251 (Avg Bid)
    $251 Oferta Promedio
    55 ofertas

    We require some assistance in drawing in both Solid works & bSolid (biesse sofware) for engineering & manufacturing furniture and timber products. We are a bespoke custom manufacture of high quality product and projects. Please enquire for more information.

    $11 / hr (Avg Bid)
    $11 / hr Oferta Promedio
    55 ofertas
    CAD design 4 días left
    VERIFICADO

    design a chamber with a mist spray system

    $129 (Avg Bid)
    $129 Oferta Promedio
    67 ofertas

    I'm a retired homeowner. I want to remodel one wall in my living room removing the existing gas direct vent fireplace and replacing it with a 48" linear model. It will involve opening up the interior wall only, removing the existing fireplace, installing the new one that will require some minor reframing to fit the new fireplace. The existing gas line and electrical can be extended. Base...

    $404 (Avg Bid)
    $404 Oferta Promedio
    17 ofertas

    We are looking for structural steel designer for a warehouse 1670 square meters and a 900 square meters approximately. You can see the general dimensions on the attachment. The height on the sides should be 9.14 meters (We want to use a full length steel beam). The base can be a pedestal or embedded on the floor (It is very important to specify foundations for the building). The roof and the s...

    $1112 (Avg Bid)
    $1112 Oferta Promedio
    47 ofertas
    Civil engineer 4 días left

    I want to learn about the project, and I have never done business, and hopefully I am smooth on this projectI want to learn about the project, and I have never done business, and hopefully I am smooth on this project

    $54 / hr (Avg Bid)
    $54 / hr Oferta Promedio
    18 ofertas
    Civil Engineer 3 días left

    Looking for a civil engineer for designing and developing church in Gujarat

    $311 (Avg Bid)
    $311 Oferta Promedio
    17 ofertas

    Required Solid work Expert who perform the motion study for me. I have 3D Model and all input data. Thanks

    $129 (Avg Bid)
    $129 Oferta Promedio
    12 ofertas

    Principales artículos de la comunidad CAD/CAM