Diseño arquitectónico Jobs

Necesito elaborar 4 secciones transversales y 4 perfiles longitudinales perfectamente escalados, todos acompañados de su respectiva tabla de estacionamiento con elevación. Alcance específico • Cada sección y perfil debe mostrar claramente cotas y las elevaciones de referencia. • Seleccioné la opción “Sí, detalles del terreno”, por lo que quiero que se representen formaciones naturales, cortes y rellenos significativos, taludes y cualquier elemento topográfico que afecte el diseño. • La tabla de estacionamiento debe listar estación por estación la cota natural y la cota proyectada para comparación directa. la tabla debe estar generada cada 30 cm. Formato de entrega &n...

I need a skilled mechanical drafter to turn my HVAC layout sketches and notes for a commercial building into clean, accurate 2-D technical drawings. The focus is purely design & drafting—no prototyping or broader consulting—so I’m looking for someone who can jump straight into detailing supply/return ducts, piping runs, equipment locations, and basic schedules using AutoCAD (or equivalent CAD software). You will receive: • Architectural floor plans in DWG/PDF • Hand-marked HVAC zoning diagrams and load data • Manufacturer cut-sheets for the specified units Your deliverable back to me: • Fully layered DWG files and matching PDF sets ready for permit submission • Title block filled out with my project information • Duct and pipe...

I have an industrial-grade wiring diagram sitting in a single PDF. I now need it redrawn so it fully complies with AS/NZS 3000 Wiring Rules and uses the correct Australian symbols, notation, and layout conventions. The end product must be clear enough for my electricians to install from and for inspectors to sign off without extra clarification. Please carry over every circuit, device and cable shown in the original, updating anything that clashes with the standard—earthing, cable sizing, protection labelling, colour codes, reference tags, you name it. Deliverables • Clean, AS/NZS 3000-compliant wiring diagram (PDF) ready for issue • Matching editable file (DWG, DXF or similar) If you already work in AutoCAD, Revit, EPLAN or similar packages and have produced indus...

I need detailed technical drawings for a Listed Building Consent application to replace two existing windows with new wooden casement windows. Requirements: - Drawings must comply with listed building regulations - Accuracy in dimensions and details is crucial - Experience with listed buildings and technical drawing is ideal See attached the diagrams from the tradesperson who will be making/fitting the windows, who can also provide further details as required.

प्रत्येक महीने मुझे नगर पालिका व अन्य स्थानीय प्रशासनिक कार्यालयों को कानूनी प्रारूप में प्रार्थना-पत्र भेजने और सफाई अभियान सम्बन्धी मामलों पर नियमित फॉलो-अप करने की आवश्यकता है। मुद्दे आमतौर पर सार्वजनिक जगहों की सफाई, कचरा उठाने की अनियमितता तथा स्वच्छता मानकों के उल्लंघन से जुड़े होते हैं। मैं प्रमाण के रूप में ली गई फ़ोटो उपलब्ध कराऊँगा; इन्हें याचिका में सम्मिलित करना अनिवार्य होगा ताकि अधिकारी त्वरित संज्ञान ले सकें। आपको हिंदी (आवश्यक) और, आवश्यकता पड़ने पर, अंग्रेज़ी में भी ड्राफ्ट तैयार करना होगा—प्रासंगिक नगर पालिका अधिनियमों, उपविधियों व नियमों का उल्लेख करते हुए। काम का प्रवाह इस प्रकार रहेगा: • मेरे भेजे चित्र व संक्षिप्त तथ्य‐सार से प्रारम्भिक मसौदा तैयार करें • फ़ाइनल ड्राफ्ट मुझे अनुमोदन के लिए लौटाएँ • स्वीकृति के बाद मेल/ऑन-लाइन पोर्टल/स्पी...

I run a custom casework shop and I’m looking for someone who can jump straight into MicroVellum and turn my project data into production-ready shop drawings. Your primary focus will be generating drawings that include full fabrication details—every panel, edge-band, hardware note, and machining instruction that my team needs on the floor. You won’t be starting from a blank screen; I already have a library of drawings and templates that you can reference and adapt. Accuracy and consistency with our existing standards are critical, so I’ll share samples up front and be available for quick clarifications. Deliverables • A complete MicroVellum drawing package for each assigned job, ready for release to the CNC, including plan, elevation, section, and part break...

Project Title: 2D Drafting & Dimensioning in Solid Edge (Cable Drum – Urgent) Project Description: I am looking for a freelance design engineer to complete 2D drafting work in Solid Edge for cable drum assemblies. The 3D models and base drafting files are already prepared. The main task is to properly arrange dimensions and organize the drawings in a clean and standard format. Project Details: Component: Cable Drum Quantity: Minimum 50+ drums (similar type, with variations) Scope of Work: Place dimensions accurately and in proper positions Maintain consistency across all drawings Clean and organize the existing drafting layout Ensure readability and professional presentation Follow standard drafting and fabrication-friendly practices Make minor corrections if required Deliv...

Refine Technical Drawings in AutoCAD

I am looking for an experienced AutoCAD professional who has worked with SmartDCR / PreDCR (Punjab) to fix layer and compliance issues in my DWG file. The drawing is a nursery school building plan, and although geometry is mostly correct, it is currently failing in SmartDCR with the following error: Main Issue: “Layers are not formatted as per SmartDCR standards” Scope of Work: Clean and prepare the DWG file for SmartDCR submission Remove unnecessary elements: Elevations Sections Furniture / extra blocks Fix and apply correct SmartDCR layer naming, including: _PLOT _ROAD _BLDBLD _ROOM _DOOR _WINDOW _TEXT _DIM Ensure: Plot boundary is a closed polyline No overlapping or duplicate lines No objects outside plot boundary Remove all blocks / nested elements (fully exploded draw...

I have an architectural floor-plan sketched by hand that now needs to live inside AutoCAD. The job is straightforward but must be precise: reproduce every wall, opening and structural line in 2-D, then add full dimensions, room labels and any notes that appear on the original sheet so the drawing is construction-ready. You will start from my scanned PDF and send back a clean DWG that uses logical layers for walls, doors, windows, text and dimensions. No 3-D work is required; a well-organised 2-D file with accurate line weights and annotation styles is all I’m after. Deliverables • One AutoCAD DWG containing the complete, annotated floor plan • An exported PDF that matches the DWG layout for quick review I’ll supply the scan as soon as we kick off and will be ...

We are working with small German companies which need to make a revision Plan of the construction site. We are making these plans/updates for them. Here’s how I see the process: once I share the current PDF/CAD set, you just change all changes that need to be done. Deliverables I expect • A revised drawing set (DWG + flattened PDF) with every change clouded or clearly tagged • File naming and sheet titles kept consistent with the original package All updates must remain code-compliant and ready for local permitting, so please be comfortable working to residential standards and layer conventions. If you use Revit, AutoCAD, or Archicad, that’s fine—just confirm you can export clean DWGs. Let me know if your interested !!

I need detailed architectural floor plans produced in Autodesk software. You will be turning my sketches and notes into clean, accurate drawings that can be issued to consultants and expanded later into full construction documentation. The drawings must be created entirely in AutoCAD or Revit, drawn to real-world scale, and organised on sensible layers so elevations and sections could be added in the future. Please include walls, doors, windows, fixtures, room names and clear overall and partial dimensions. Deliverables • Dimensioned floor plan in the native Autodesk file format (.dwg or .rvt) • PDF sheet ready for printing at 1:100 or 1/8" = 1'-0" • All line work cleaned (no duplicate or stray entities) and layers named to a recognised standard I w...

I need a skilled legal professional to draft a motion for summary judgment in a civil case. The motion should address both liability and damages. Key requirements: - Legal expertise in civil litigation - Experience with drafting summary judgment motions - Strong understanding of liability and damages issues

I am a licensed Land Surveyor and need a CAD drafter to create boundary survey plats. There are also projects for other types of surveys if you have familiarity with topographic survey plat requirements. You will use provided survey points and property research to create a plat that meets Georgia state standards as well as county/city requirements when applicable. Being based out of the metro Atlanta area is a slight bonus, but this will be entirely remote. Typical Deliverables: - boundary survey plat meeting state and local requirements to be recorded. Ideal Skills & Experience: - Proficiency in CAD software, AutoCAD preferred but anything that can produce the deliverables in DWG format is acceptable. - Experience with boundary surveys (experience with ALTA/NSPS survey is a plus) -...

I have a cantilever-style sliding gate to be built from G.I. material and I need a clean, fabrication-ready AutoCAD drawing set. The drawing must show overall plan and elevation views, accurate member sizing, weld call-outs, and any hardware or runner details a fabricator will require to cut, drill, and assemble the gate without guesswork. Please deliver the native .dwg plus a PDF sheet that can be printed at A3. If you can add an exploded view or a simple parts list inside the same file, that will be a bonus. Dimensions will be supplied the moment we start; I simply need the expertise to turn them into a shop-floor friendly layout that meets standard cantilever gate practice. The file should open flawlessly in AutoCAD 2018 or later, with layers named logically and no stray linework.

I need a hand-drawn floor plan for a cabin converted to CAD. The final CAD drawing must be stamped by a licensed architect or engineer to submit to Chelan County, Washington for a building permit. Key Requirements: - Convert hand-drawn floor plan to CAD - Obtain necessary stamps from licensed professionals - Ensure compliance with county building regulations Ideal Skills and Experience: - Proficiency in CAD software - Experience with architectural drawings and permits - Licensed architect or engineer Please submit past work related to similar projects.

Job Summary We are seeking a skilled Draughtsman with experience in façade systems, including framing, cement board cladding, and EIFS (Exterior Insulation and Finish Systems). The candidate will be responsible for preparing detailed technical drawings, shop drawings, and coordination drawings to support project execution. Key Responsibilities Prepare detailed shop drawings for façade systems including: Metal framing systems Cement board cladding EIFS systems Interpret architectural and structural drawings and translate them into accurate fabrication and installation drawings Coordinate with architects, structural consultants, and site teams to resolve design and execution issues Produce GA drawings, section details, and connection details Ensure drawings comply with project ...

I’m ready to move my wood doors and windows from concept into production and I need meticulous cut sheets and fabrication drawings to make that happen. I’ll supply visual references that show the styles, profiles, and overall look I’m after—your role is to translate those references into clear, shop-ready documentation. You’ll be drafting both the doors and the windows, so accuracy across matching sightlines, stile and rail dimensions, glazing allowances, hardware pockets, and finish call-outs is essential. I expect fully annotated drawings that a fabricator can follow without question: orthographic views, sections, exploded or detail views where joinery needs extra clarity, and a final schedule summarising sizes and quantities. Preferred file formats are DW...

I need detailed as-built drawings for a sanitary sewer project. These drawings are primarily for documentation to ensure future maintenance is straightforward and efficient. Key Requirements: - Accurate representation of manhole locations and elevations - Detailed mapping of the sanitary sewer system - Precision in all measurements and annotations Ideal Skills and Experience: - Proficiency in CAD software - Experience with sewer system documentation - Attention to detail and accuracy in engineering drawings Looking for a freelancer who can deliver high-quality, precise work.

I have a 12.5 ft × 60 ft footprint and want a full set of structure-focused drawings for a two-story house. The emphasis is on accuracy and code compliance rather than architectural styling; in other words, I need clean, build-ready structure drawings. Here’s what I expect to receive: • Dimensioned floor plans for both levels with beam, column, and wall locations • Foundation layout, footing details, and rebar schedule • Roof/framing plan with connection specifics • At least one longitudinal and one transverse section that call out all member sizes • General notes covering loads, materials, and any code references Please deliver everything in both DWG and PDF so I can submit to the local authority and hand straight to the builder. The envelope...

I have a photo of the house plan that I really like. But I would like to figure out a way to reduce cost to the roof line and the foundation. For the roof line, I would like to reduce the amount of valleys and angles and pop outs. I would also like it to be a three car garage, which should also extend the size of the bonus room. As far as the foundation and footprint of the house, I would like the walls to be extended out to square off the design to create a more cost-effective foundation and build. I would plan to take your drawing to my local draftsmen for final plans due to local regulations. I just want to try to get something quickly. That gives them a good idea of what I am looking for. Would also like the vault in the great room to run the opposite direction so with the flow of the...

I need a highly detailed illustration traced in AutoCAD. The original medium is a scanned document. Requirements: - Convert a scanned illustration to AutoCAD - Maintain high detail and accuracy Ideal Skills: - Proficiency in AutoCAD - Experience with tracing complex images - Attention to detail and precision

I have a 140 × 54 ft heavy-timber framed home already engineered; the full structural package is in hand and ready to share, including floorplan and elevations for every space. I need them tied seamlessly to a construction-ready Mechanical, Electrical, and Plumbing design. I am primarily building with SIP's and ICF's, so there will be a strict limitation on the number of penetrations between the interior and exterior envelope. Scope • Generate detailed MEP plans (sizing, routing, schedules, panel layouts, fixture counts, equipment specs) sufficient for bids and field installation. All work should conform to current state of Washington, Whatcom County, and City of Blaine codes. Deliverables I’ll supply the structural drawings in PDF format. You will return a coo...

I need a Missouri-licensed architect to prepare full construction drawings for a 1,200 sq ft extension that will convert part of my commercial building into a dedicated garage. The space must comfortably accommodate multiple vehicles; beyond that I’m open to fresh design ideas because the existing structure doesn’t dictate a particular style. Scope • Site visit coordination (virtual or in person) to verify dimensions and local conditions • Schematic layouts showing optimal vehicle flow and clearances • Code-compliant architectural, structural, and basic MEP sheets suitable for permitting in Missouri • Professional seal for the State of Missouri on the final set Acceptance Drawings should meet current Missouri building codes and be ready for cit...

I need professional, fully dimensioned, and drawn-to-scale 3/16" drawings of specific zones in a residential building for permit approval. Essential Requirements: - Detailed, accurate scaled drawings - Dimensioned and suitable for permit submission - Focus on specific zones as per requirements

Project description I’m seeking a CAD technician or architectural technologist to produce a small set of early‑stage concept and technical‑intent drawings for a modular infrastructure product. The design is already defined (overall geometry and key dimensions are fixed). I am not looking for design development, compliance drawings, or construction details at this stage. The task is to translate existing intent into clear, professional drawings suitable for early technical discussions. Scope (indicative) 1 general arrangement plan 1–2 elevations 1–2 key sections I will provide sketches, reference dimensions, and written guidance. Requirements Strong 2D CAD skills (AutoCAD or similar) Experience preparing plans, sections, and elevations Comfortable working from provide...

Planning Drawings — Commercial Unit Conversion to Ground Floor Flat, SE23 I need architectural drawings for a prior approval planning application (Class MA, commercial to residential) at a ground floor unit in Forest Hill, London SE23. Background A prior approval was previously granted for this unit. We are submitting a fresh application. I will provide the following as reference material: Current as-built layout drawings produced by the unit's fit-out as a commercial unit (showing the existing internal arrangement) Previous approved planning drawings for reference IMPORTANT: All drawings must be your own original work. Reference material is provided for layout and dimensional context only. You will be required to produce all drawings independently from scratch, using the r...

Scope of Work: Road and Fencing Longitudinal & Cross Sections The assignment involves the preparation of longitudinal and cross-sections of the road along with the existing roadside fencing levels. The objective is to develop a new proposal for fencing at road level wherever the existing fencing is found to be below the road level. Deliverables Longitudinal Sections: One longitudinal section for the road. One longitudinal section for the roadside fencing. Both sections to be presented in the same plan, using different colors to clearly illustrate level differences. Cross Sections: At required intervals to capture road and fencing conditions at different levels. Demarcation Plans: Existing Road alignment. Existing Fencing positions. Proposed Fencing adjustments at road level. ...

I'm looking for a skilled designer to transform a shipping container into a cozy 2-bedroom home. The layout should be functional and modern, with the following specifications: - 2 Bedrooms: Located at separate ends of the container. - 1 Bathroom: Must include all necessary fixtures. - Kitchen: Open concept design, seamlessly integrated with the living area. - Living Area: Spacious and inviting. Interior Requirements: - Corrugated steel finish throughout. Exterior Requirements: - Trailer finish preferred. - Alternatives: Wood or stucco. Ideal Skills & Experience: - Experience in container home design. - Strong understanding of space optimization. - Proficient in both interior and exterior design. - Familiarity with corrugated steel and trailer finish. I need build ready plans ...

I need a full set of permit-ready construction drawings for a 20' × 48' sugar shack that will be approved as an agricultural barn. The structure will stand on concrete footings with a 1-foot concrete perimeter wall and incorporate floor drains tied into a simple gravity outflow. Above the slab I’ll be using 8 × 8 cedar posts, matched with properly sized beams, and pre-built, engineer-stamped scissor trusses to give me a 12-foot eave height. Openings are important: three oversized metal doors plus one metal garage door go on the long sides, and I want sliding windows for natural light and ventilation. The roof will be finished with metal sheets. What I need from you • Foundation, framing, roof, and drainage plans • Elevations, sections, door/windo...

Ich benötige einen präzisen CAD-Grundriss für ein Gewerbegebäude, das als Einzelhandelsfläche genutzt wird. Im Layout müssen mindestens eine klar strukturierte Verkaufsfläche sowie ein passender Lagerraum berücksichtigt sein. Ich stelle Ihnen alle vorhandenen Maße, Photos und eventuelle Skizzen zur Verfügung. Auf deren Basis erwarte ich eine gut organisierte Raumaufteilung, die Bewegungsströme sowie Waren- und Lieferwege logisch abbildet und spätere Möblierungs- oder Ladenbaupläne erleichtert. Bitte liefern Sie mir: • editierbare CAD-Datei (DWG oder DXF) • druckfertiges PDF in korrektem Maßstab Erfahrung im Entwerfen von Gewerbegrundrissen ist mir wichtig; idealerweise haben Sie bereits Einz...

Description: We need an AutoCAD drafter to prepare a clean DWG base package from existing scanned plans. Scope: - redraw the existing building from foundation / basement level up to roof - include all floors, elevations, section, and site / plot plan - integrate the following modifications in general drafting only: - new basement - elevator shaft through all levels - technical room in basement - general basement layout - general ramp indication if shown in the provided instructions Important: - this is general drafting only - no design decisions - no structural design - use existing drawings as base reference - unclear items must be marked: “Preliminary / Subject to technical validation” Deliverables: - editable DWG files - PDF set - clean layer organization Goa...

Job Title: Microvellum Joinery Drafter – Cabinetry & Custom Joinery (Ongoing Work) Job Description: We are a Sydney-based joinery company (NC Slater Group) specialising in high-quality residential and commercial joinery, and we are looking for an experienced Microvellum Drafter to support our growing pipeline of projects. You will be responsible for preparing detailed shop drawings, cutting lists, and CNC-ready files for custom joinery, including kitchens, wardrobes, vanities, and commercial fit-outs. This is an opportunity to work with a professional and fast-growing team on a variety of high-end projects. Scope of Work: Prepare shop drawings using Microvellum Produce cutting lists and CNC files Interpret architectural drawings and design intent Develop joinery details...

I need a detailed 2D isometric drawing of an oil and gas pipe system. The drawing must include: - Pipe specifications - Valve locations - Flow directions The final output should be in DWG format. Ideal skills and experience: - Proficiency in creating 2D isometric drawings - Experience with oil and gas piping systems - Expertise in DWG format Looking forward to your bids!

I regularly receive FrameCAD .dwg files for properties we are building and need fast, accurate pricing so I can turn quotes around to my own clients. Each batch is small—typically one to five drawings—but the files carry complex annotations and the drafting style is never identical from job to job. Here’s how the workflow will look: I’ll email you the drawings together with my current $/lb rate. You review every line, calculate the steel weight, and send back a single figure for the full job plus a short breakdown that shows how you arrived at it. Turnaround must be no longer than 24 hours each time, as I’m often working against tight bid deadlines. Your deliverable every time: • Total calculated weight for all drawings in the batch • Final...

أحتاج إلى إعداد خريطة هندسية شاملة لبناء مسجد جديد. ما أريده بالدرجة الأولى هو: • تصميم المبنى الرئيسي بكل عناصره الهندسية • مخططات تفصيلية لأماكن الصلاة والخدمات (دورات المياه، أماكن الوضوء، غرف الإدارة) إذا رأيت ضرورة لإضافة مساحات الوصول والمرافق العامة فأنا منفتح على مقترحاتك، لكن تركيزي الحالي ينصبّ على ضمان دقة توزيع مساحات العبادة والخدمات وفق المعايير الشرعية والوظيفية. أتوقع الحصول على ملفات CAD قابلة للتعديل (AutoCAD أو Revit) مرفقة بمخططات PDF جاهزة للطباعة، مع توضيح الأبعاد، مواد البناء المقترحة، ومسار التهوية والإضاءة الطبيعية. أي تصور بصري ثلاثي الأبعاد سيكون إضافة مرحّباً بها لتسهيل العرض على لجنة البناء. يرجى إرفاق نماذج سابقة لأعمال مشابهة عند التقديم، مع ذكر المدة التقديرية لكل مرحلة من إعداد المخططات وحتى التسليم النهائي.

I need a complete, permit-ready digital plan package for a residential project. The final submission must be a single, fully dimensioned set in PDF (minimum sheet size 11" × 17") plus one matching set of supplemental material. Deliverables • Architectural plans • Structural plans • Plumbing plans • Mechanical plans • Electrical plans • All supporting schedules, notes, and calculations necessary for approval Each drawing should be clearly labeled, fully dimensioned, and coordinated so that the disciplines align without conflicts. Please format the sheets consistently and include a cover sheet with an index. I will supply site information and any reference sketches once we start. Send sample pages of similar residential work if ava...

I have a building design that now needs fully documented exterior elevations. The floor plans and sections are locked in; what’s missing is a clean set of front, rear, and side views that align perfectly with those plans, respect all current dimensions, and show accurate roof lines, window and door openings, and façade articulation. Material notes are helpful but not critical—the priority is precise, well-layered line-work that can drop straight into the rest of the drawing package. I’ll supply the latest plans as soon as we start; feel free to suggest any clarifications you need before drafting begins so we can keep revisions to a minimum and meet the deadline smoothly. Thank You,

The brief is straightforward: transform a single living room into a modern space that rests on a calm, neutral-tone palette. I will supply full room measurements and a few reference photos as soon as we start. From there, the scope includes planning the layout, selecting every major furniture piece, and illustrating the concept with clear CAD drawings. You may use AutoCAD, SketchUp, Revit, or any other professional drafting software you prefer, as long as the final files open cleanly for dimension checks. Lighting, wall treatments, and soft furnishings should all follow the same modern language—think sleek lines, functional forms, and textures that work in layered neutrals rather than bold colour pops. Deliverables • Scaled CAD floor plan and elevations (DWG + PDF). • 2...

I have a commercial project that is already past concept and schematic stages, so what I’m missing now is a fully coordinated detailed-design drawing package created in either Revit or AutoCAD. Here’s what I need from you: • Architectural plans, sections and elevations showing dimensions, levels, finishes, door / window tags and schedules • Structural details—including foundations, framing, reinforcements and any typical/critical connections—fully referenced back to the plans • Sheets compiled and ready for permit submission in both native file format (RVT or DWG) and PDF Acceptance criteria: • All views are to scale, cleanly annotated and on a consistent title-block template • Layers / families are organised logically for easy hand-...

I need a complete General Arrangement Drawing for a custom‐built heat exchanger that must meet ASME requirements. This is not a standard shell-and-tube, plate, or air-cooled unit; the configuration is unique to the process, so I’m looking for someone who can translate my process data and preliminary sketches into a clear, fabrication-ready layout. The drawing has to indicate all critical overall and nozzle dimensions, support details, lifting points, weld seams, and space envelopes for maintenance. I work in AutoCAD, so a DWG file accompanied by a clean PDF is essential. If you normally add a simple bill of materials and a drawing legend, please include those as well. Acceptance is straightforward: the file opens error-free in AutoCAD 2021, dimensions and notes align with the ASME ...

I’m about to build a brand-new home and want an architect who can translate my ideas into a clear, build-ready concept package. This assignment covers the very first stage only—concept development for a residential new construction. Here’s what I need from you: • A set of preliminary floor plans that explore layout options and circulation. • Exterior massing studies or quick 3D sketches that convey overall form, scale, and roof lines. • One consolidated concept drawing set (PDF + editable source) capturing the preferred scheme with room dimensions, basic elevations, and a simple materials call-out. We’ll start with a brief video or phone chat so I can walk you through the site constraints, my space requirements, and any style references I&rsqu...

Key Responsibilities - 3D Modeling & Drafting: Develop detailed architectural and interior design models using Autodesk Revit. - Documentation: Prepare construction drawings, floor plans, elevations, and sections with accuracy and clarity. - Collaboration: Coordinate with architects, engineers, and clients to ensure design intent is fully realized. - Customization: Create parametric families, templates, and libraries tailored to project needs. - Visualization: Generate realistic renderings and walkthroughs to communicate design concepts effectively. - Quality Assurance: Ensure compliance with industry standards, building codes, and project specifications. - Project Management: Handle multiple freelance assignments, maintaining deadlines and delivering high-quality outputs. ...

Requirements: - Based in China (essential) - Experience with trailer/service body design - Proficient in CAD (SolidWorks, AutoCAD, Inventor, etc.) - Able to produce accurate fabrication drawings - Understanding of manufacturing processes - Must liase with Chinese factories Details: - Ongoing work - Remote role - Flexible hours Please describe your experience and include examples of similar work.

I have several architectural PDFs that are anything but tidy, and I need them rebuilt in CAD so they are accurate, clear, and usable for further design and permit work. Every wall, opening, and fixture on the PDFs has to be transferred, and I want the resulting DWG files to show precise dimensions throughout. Please make sure each space is clearly labeled with its room name and that the corresponding dimensions appear exactly where they belong. Line weights and layers should be kept logical so the drawings remain easy to navigate once imported into AutoCAD or Revit. Deliverables • Clean, layered DWG files that match the PDF layouts • All dimensions and room names placed as noted on the originals • A quick PDF export of the final CAD sheets for review and sign-off...

I'm seeking an experienced engineer to create a detailed schematic drawing for part of a hydraulic system. The system predominantly consists of tanks linked by pipes, along with pumps and a pressure exchanger. Requirements: - The schematic must include: - Pipes - Pumps - Pressure Exchanger - Tanks - Manifold Ideal Skills and Experience: - Proficiency in hydraulic system design - Experience with schematic drawing tools/software - Attention to detail and accuracy - Engineering background, preferably in fluid mechanics or related fields Please provide samples of similar work and a brief overview of your approach to this project.

I have a full set of steel fabrication drawings in PDF that now need revising. The mark-ups cover everything from shifting a few dimensions to tightening up connection details and, in a couple of spots, swapping out specified members, so I need someone who can confidently handle dimensional tweaks, detailing improvements and any material substitutions that come up. You’ll start from the PDFs I supply. If you prefer to trace or convert them into CAD first, that’s fine—as long as the final package comes back to me as clean, print-ready PDFs along with the editable CAD files you worked in (DWG or similar). Every drawing must keep its original scale, title block and revision history intact. Turnaround is flexible, but the sooner I can issue these to the fabricator the bette...

I’m moving forward with a lot of projects in the United States and now need a partner who holds an active U.S. architecture or professional-engineering license. Your stamp will be used for permit submission, so the jurisdiction must recognise your seal—digital or wet. Scope • Review my existing drawings and notes, confirm code compliance and identify any gaps. • Prepare (or update) plans, details and calculations as required by the local building department. • Sign and seal the final set, along with a brief letter of professional responsibility. Acceptance criteria 1. You provide your current state license number for verification before work begins. 2. All sheets and calculations carry your seal and signature. 3. The package meets the building depar...

I need a 2D technical drawing of a glass table. The drawing should include: - Top view - Dimensions and measurements Ideal skills and experience: - Proficiency in technical drawing software - Experience with furniture design drawings - Attention to detail and accuracy in measurements

I'm seeking detailed 2D elevation drawings, roof layouts, and structural member layouts for a commercial building project. You will work from an eagle view report and photographs. Requirements: - Accurate 2D elevation drawings - Roof layout detailing all features - Structural member layout (beams, columns, etc.) - Use provided eagle view and photos as primary reference Ideal Skills and Experience: - Proficiency in AutoCAD or similar software - Experience with commercial building layouts - Strong attention to detail and accuracy - Ability to interpret and work from photos and eagle view reports Please provide samples of similar work.