Find Jobs
Hire Freelancers

I would like to hire an Arduino Engineer

$750-1500 AUD

Cerrado
Publicado hace casi 7 años

$750-1500 AUD

Pagado a la entrega
I need assistance designing and building a GPS tracking device using LoRa. This will be a proof-of-concept and test rig for a larger project.
ID del proyecto: 14007648

Información sobre el proyecto

34 propuestas
Proyecto remoto
Activo hace 7 años

¿Buscas ganar dinero?

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto
Cobra por tu trabajo
Describe tu propuesta
Es gratis registrarse y presentar ofertas en los trabajos
34 freelancers están ofertando un promedio de $1.435 AUD por este trabajo
Avatar del usuario
Hi Sir I am an expert embedded system design with more than 8 years of experience. I have been using the arduino since its arrival. I have used the LoRA too please get in touch to discuss it further Regards
$1.200 AUD en 10 días
4,9 (137 comentarios)
7,5
7,5
Avatar del usuario
hi, i am an electrical engineer. i have expertise in embedded system design and Matlab.i can help you with this project. Kindly reply back and let us discuss project further. regards
$2.500 AUD en 15 días
4,8 (35 comentarios)
7,4
7,4
Avatar del usuario
Hello dear I have experience in designing electronics circuits and can make your project. I will make your project practically on breadboard and will provide you circuit, code and PCB design along with gerber files. I will design your project using extra cheap and reliable components that will be beneficial for you if you are planning to make a commercial product.I also have experience in bluetooth modules and android apps development. I can also develop android app for you that will be able to control your project and you will be able to monitor your data. If you wish we can discuss in chat.
$1.250 AUD en 20 días
5,0 (31 comentarios)
6,2
6,2
Avatar del usuario
Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in embedded programming using pic, dspic controllers and MATLAB codding for Power projects, Boot loaders, CAN communication, EEprom. UART , Protocols for networking, wi-Fi routers, Electrical vehicles and AC drives controls. I designed sine wave inverters for standalone and grid tie Inverters. I designed projects like Off line UPS up to 3 KVA, synchronous rectifiers, Solar MPPT chargers, Battery chargers ,Grid tie inverters design with PLL and feedback control circuit emergency light of 66W and Online UPS control cards, Battery Charging power supplies, LED drivers for PWM controlling and dimming, SMPS, Power supplies. I have experience in schematics and PCB design experience in Altium and ORCAD. I am ready to work for you. Please contact for further discussion.
$1.388 AUD en 30 días
4,9 (13 comentarios)
6,1
6,1
Avatar del usuario
Hi Sir, We have read your project, we can do it for you in nominal rates. we are professional team consisting of extremely capable engineers. we do our jobs with great professionalism. We can handle projects from Micro to Mega levels and consider our customers as valued persons. We have dealt with all kind of GPS chips and LORA modules. we can design you an optimized system. We do such projects from the last eight years. We offer you our skills for this project at very low rates comparatively without compromising the quality of work. Let me introduce you to our company TURKTRONICS. We are TURKTRONICS. We are professional with 8+ years of experience in Circuit designs, PCB designs, embedded system solutions, mobile app development, programming and software development. We provide complete end to end solutions for all kind of development projects. IOT is our strong point. In this bid, prototyping and shipping cost is not included however paying extra slight of money to include prototypes. We have collaboration with Atechcircuits in Shenzhen China for excellent quality PCB manufacturing. We care about our clients and help them to get out of any potential problem throughout the projects and also give post completion technical support if ever required. We are very much looking forward to hear from you on this in coming days! Cheers!!! Ahmad Lead Technical Engineer TURKTRONICS An Internet of Things Company
$750 AUD en 10 días
4,8 (39 comentarios)
6,4
6,4
Avatar del usuario
Hi, I hope you are doing well. I am working on LoRa based projects. I would like to discuss the project in more details. Looking Forward, Khawaja
$1.184 AUD en 20 días
4,8 (77 comentarios)
6,6
6,6
Avatar del usuario
Hello! My name's Jorge, I am an electronics engineer. I have experience working with embedded devices. I can be of help in your project, as I have worked with the Arduino platforms in several cases, including IoT devices protocols as MQTT and GPRS automation. Please share with me the details of your project, the Lora board you plan to use, and all your requirements. I'd be glad to answer any question in order to help you get your project started. Thanks for your time.
$1.100 AUD en 20 días
4,9 (25 comentarios)
5,4
5,4
Avatar del usuario
Hi, I have experience in Arduino developing. I can do your project. Regards, Slavi.
$1.250 AUD en 30 días
5,0 (17 comentarios)
5,4
5,4
Avatar del usuario
Hello Dear, I am an expert with more than 15 years in the field of embedded systems, electronics, prototyping and pcb layout. I have worked on 8-bit, 16-bit and 32-bit architectures developing ultralow power designs with computational complexity. I have worked on Smart Grid, wireless, telecommunications and automotive. I have developed a GPS tracking device based on lorawan. I assure you the best solution for your work. Regards Ch
$1.250 AUD en 30 días
4,8 (30 comentarios)
5,7
5,7
Avatar del usuario
Hi, I am an electronics engineer in Ireland, with 15+ years experience in industry. I have worked with several US companies to develop their new products. I can help you with this. Please open a chat for more detail. Thanks.
$1.500 AUD en 20 días
5,0 (27 comentarios)
5,3
5,3
Avatar del usuario
FREELANCER RECOMMENDED ------------------------------------------------------ Can help... I am an Expert... Lets Start! Please start a Discussion with me and we can get started from there... Please check the past projects I have handled and check my reviews for what employers have to say about my work... Can start right now...
$1.250 AUD en 20 días
5,0 (9 comentarios)
4,3
4,3
Avatar del usuario
Hello! I can carry out your project. I have all the necessary equipment (microcontrollers and modules) in my studio. I've had experience in writing firmware for such devices. But In fact, I need a more detailed description of the project. P.S. You can see the overview of completed projects in my profile. https://www.freelancer.com/u/Gippopotam.html
$750 AUD en 15 días
4,6 (11 comentarios)
4,1
4,1
Avatar del usuario
Hello, Greetings!!! Hope you are doing great..!! I have carefully reviewed the requirement. I am very much interested in this project and would like to work with you on your important project. Kindly share the detailed requirement, so I can work out on that and will give you specific time frame and cost. I have mentioned the estimated cost in a bid which is subject to vary depends on the final scope. I can start working on the project immediately. I’m glad to answer any question you may have! Looking for a favorable consideration and let me know to move further! Many Thanks & Regards, Rishi A.
$1.000 AUD en 30 días
4,9 (7 comentarios)
3,9
3,9
Avatar del usuario
Hi, I'm an Electronics Engineering student from Argentina. I consider I'm able to help you. I'm new to freelancer but that doesn't mean I have no experience, you will get from me the best effort to get a job done that meets up your expectations, and receive a good review and rate from you. If you are curious you can check my profile I've completed nine jobs already, with good recommendations. If you have any question, you can leave me a message. Regards,                Esteban Toribio.
$750 AUD en 25 días
4,6 (12 comentarios)
4,1
4,1
Avatar del usuario
Hi, what kind of Lora module are you going to use? Semtech's Sx1276? I can assist you with the design of a proof of concept (prototype). I am currently in Brisbane so our schedules are most likely compatible. Feel free to contact me to discuss the project further. Best regards, Gabriel
$1.500 AUD en 14 días
5,0 (5 comentarios)
3,7
3,7
Avatar del usuario
Hi, Can you please share your project requirements/task expected from us. About us: Micro-controllers we have worked on PIC, STM32, PSOC and AVR. Development kits and instruments available for testing purpose. For PCB designs we use KICAD. C#, LABVIEW, Python for GUI, Controlling or Datalogging purpose. Thanks and Regards, Santosh
$1.371 AUD en 20 días
5,0 (3 comentarios)
3,5
3,5
Avatar del usuario
I have prior experience in Mentor Graphics Nucleus Connectivity group. I worked with many communication protocols and stacks in C. I think this makes me a suitable candidate for this project.
$888 AUD en 25 días
4,5 (6 comentarios)
3,9
3,9
Avatar del usuario
Hello, how are you? I hope you have a bright day/evening from your side. I have read the details provided, but please contact me so that we can discuss more on the project. I believe I have the required skills in this case. I will work on your requirements personally since I do not outsource to third parties, this guarantees you high-quality work that is delivered on time. You can also request for revisions till you’re fully satisfied with the work. I believe writing is a passion and not a money making business where people will deliver low-quality work just to get paid. Try my services, and you will never regret. Waiting for your kind response
$1.184 AUD en 20 días
4,8 (3 comentarios)
3,5
3,5
Avatar del usuario
Dear sir. I am a professional mobile app & web developer with 7+ years rich experience. I would like to work on your project and deliver the project. I have developed many applications such as social dating, shopping, tracking, chatting, Photo and Video, News, Emoji sticker, game, deliver service system, Uber system and etc. I’ve carefully gone through your project description and so I am very interested in your project. "Your idea + my skill = good product". My fast and exact understanding about your project and best skill, high quality deliver in time made you satisfying!!! That's why I always received good and wonderful feedback from my clients. ****** Please check my profile - 100% job completed and more than 60 positive feedback https://www.freelancer.com/u/Beautistar.html ****** We can discuss other details on chat. Kindly give me opportunity to demonstrate it. Thanks. Project Estimation and Schedule to complete this project 1. Requirement analysis and technical suggestion. 2. Fashion UI designing and implement. 3. Well commented source code delivery 4. Free bug fixing + FREE maintenance service. Kind regards Beautistar
$1.250 AUD en 20 días
5,0 (2 comentarios)
2,9
2,9
Avatar del usuario
Hi, I'm a Canadian Engineer with experience in open source hardware/software and will be able to do this project for you. Please send me additional details and breakdowns of the project and its desired outcome so I could get started. I can add additional features for your system if you wish. Good luck.
$750 AUD en 20 días
5,0 (1 comentario)
2,8
2,8

Sobre este cliente

Bandera de AUSTRALIA
Australia
0,0
0
Miembro desde may 12, 2017

Verificación del cliente

¡Gracias! Te hemos enviado un enlace para reclamar tu crédito gratuito.
Algo salió mal al enviar tu correo electrónico. Por favor, intenta de nuevo.
Usuarios registrados Total de empleos publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Cargando visualización previa
Permiso concedido para Geolocalización.
Tu sesión de acceso ha expirado y has sido desconectado. Por favor, inica sesión nuevamente.