I need (Electrical + Embedded) Engineers to work with me for long term

I hope you are fine. I am a senior electronics engineer. I have rich knowledge of embedded system design and PCB designing. I have understood the project description, i am 100% sure i can complete your task. I will provide you a professional work. I have expertise in many electrical and programing tools including. 1. MATLAB 2. Proteus 3. Arduino 4. MPLAB 5. AutoCAD 6. Xilinix 7. Altium 8. LTSpice 9. PSpice 10. Mickro C I have working experience of the following controller and processor. 1. Atmel 2. PIC 3. ESP32 4. Atmega 5. Raspberry Pi 6. Nordic By profession I am an electronic engineer working in a reputed firm. My major responsibility is to design custom embedded system to fulfill the client needs. You can check my previous work in my portfolio. https://www.freelancer.pk/u/Adeel2k14 My experience and expertise help you in producing a best and effective solution of your problem. Allow me to work for you. Best Regards,

Hello How are you? Thanks for your posting job. I have read your project requirements and I am 100% sure I can complete your project perfectly. I have 15 years experience in Circuit & PCB layout design and Microcontroller Firmware design. I will do my best to give you satisfactory results if you hire me. Please discuss about your project in more details. I can deliver your job efficiently within timeline. If you hire me, I think you won't regret. Best regards. Thank you Koba

Dear Madame/M-r, We are a small R & D company, based in Bulgaria, Europe. We specialize in developing Embedded systems based ST(STM32), Microchip (Atmel )(PICs,AVR,Atmel ARM) and TI (MSP430) MCPUs and peripheries. For our mobile devices use ESP32 and nRF51/52xxx BLEs. We realize projects with requirements similar to yours. See my profile in Freelancer.com If we receive more information about your project, we will give you a real cost and time to implement your project. We based in Europe, not problems for delivery models and samples for testing Best Valeri T.

hello -->> Raspberry Pi (Windows IoT) -->> Arduino/ESP32 -->> Linux OS (administration) -->> PCB Design + Prototype i can do the tasks above

Hello, I have (4) years of experience in Arduino, I use all kinds of Arduino boards, UNO, Mega, Nano, Pro Mini...etc I have previous experience with Various Kinds of Sensors. I have previous experience with RFID Sensors. I have previous experience with Logging Data using SD Cards. I have previous experience with Relays and Buzzers. I have previous experience with Stepper Motors. I have previous experience with Servos. I have previous experience with Brushed DC Motors. I have previous experience with Character LCDs. I have previous experience with Touch LCDs. I have previous experience with RTCs ( Real Time Clocks ). I provide hardware/simulation proof that the code is indeed working. So please contact me so we can exchange more info. Thank you and good luck.

HELLO MUHAMMED, İ AM FREELANCER HERE FOR A LONG TIME İ CAN HELP YOU PLC&SCADA&HMI PROGRAMMING AND ALSO ELECTRICAL DRAWING WITH AUTOCAD&E PLAN İ CAN DO

Engineer from Toulouse, France. Have the experience and the required skills, check my profile to see some of my projects.

Hello, I'm a control and automation engineer from Turkey. I am working project based/freelance. At my university i have worked with Omrom, Scneider, Phoneix and Backhoff brand PLCs. I have 6 month of experience with all of them. After graduation i started to working with microcontrollers. Right now i'm producing my own products while doing freelancer projects to other companies or individuals. I can make PCB files with Altium. I have a little experience with FPGA so i cant say i know it but i have very strong knowledge and experience with Arduino. Since Raspberry boards are more expensive than other solutions i only used it in my three project but i have base knowledge. I wish to work with you, we can discuss terms via PM. I want to know more details about your work.

Hi there. I am a web and electronics expert. I have just read your requirements in detail and became interested in this project. As you can see my review, my specific skills are electronics and electrical engineering. I developed a digital relay protection device by relay using microcontroller and I tried to communicate between device -HMI , device-PLC and device-PC I've tried manipulating Wireless communication by Zigbee and RF, Rs485 communication, 232 communication, and USB communication according to the MODBUS communication protocol and LCD control, SCR control and IGBT control, etc, with Microcontroller, Arduino and Raspberry Pi, etc. I use programs such as Altium Designer, Proteus, mikroC PRO, Pic c, Mplab, HI-TECH, Keil, python and Qt etc. I’m also full stack web developer. I am confident I will be able to carry out this project and I am ready for your test at any time. So, I hope we will discuss more details about your project through chat. Then, I'll do my best for you and I'll give you the best results within the specified deadline. I am a person who puts credit first. Looking forward for your response. Best Regards. Hi there.

Hello Muhammad, it is a pleasure to greet you, my name is Eriksong Peñaloza, I am a Mechatronic Engineer and I have experience in developing industrial automation projects using PLC. I work with a group of engineers with skills in various areas such as web and mobile application development, as well as project development with Arduino / Esp32, as well as other technologies. We would like to establish working partnerships with you. If you agree you can write to me, and we will talk about it, greetings

Hi, Sir. I can say I am an expert in the following fields: -->>VHDL/Verilog FPGA -->>Microcontrollers Microchip PIC series -->>Artificial Intelligence, Machine Learning, Deep Learning I hope to work with you. Please contact me, and i will do my best for you. Thanks.

hello Eng Muhamed Javed its me Mohamed Salah , we have talked before about another project I would be helpful in this fields .. -Arduino/ESP32 and added Embedded Systems In general (PIC Microcontroller , AVR , NRF52840 , HCS12 , STM32) -Raspberry pi -Light Pcb Design and prototype (using Kicad , Solidworks , Autocad) Sincerely Mohamed Ahmed Salah

HELLO DEAR CLIENT I have gone through your project details and the work is DOABLE since its within my area of EXPERTISE.I will tackle are required guideline to deliver desired goal Please consider my bid. THANKS Am an expert in Electrical, Electronic & Computing Engineering with a demonstrated History of Academia in the Field of Engineering. I have research, Design and Theoretical knowledge in; Electronic Design and prototyping, Embedded (PCB circuit design and Analysis), Network Automation, Wireless Networks ( RAN & RNPO),Optical Networks (Transmission & IP), Deep Learning, RF and Microwave engineering All Programming languages, Object detection and Computer vision, signal processing & Machine learning, Able to Use Design & Simulation Software i.e MATLAB, OPTIWAVE,SYNOPSYS, QUICKFIELD, PROTEUS,AUTOCAD & MAYA.

Hi! I am electrical engineer with a passion for IoT, Automation. I have expertise on Raspberry Pi, Arduino/ESP32, Linux OS and SCADA. You may consider me for any projects in those areas. Regards Maqsud

Hey!! I am a tech enthusiast and have keen interest on taking up your project. I was the coordinator of Robotics Club of my college and have sound knowledge and hands on experience in Arduino and other microcontrollers, NodeMcu, ESP32, Microprocessors Raspberry Pi, C Programming, python, Verilog, Electronics design and simulation software's such as Xilinx ISE Design Suite, MATLAB, Proteus. My recent achievements include winning Smart India Hackathon-2020 Hardware Edition for the problem statement on Landslides Monitoring through drones by Government of India. I think I would be able to take up your project and will be able to deliver it to you successfully.

Hey, I hope you are doing Great? I am Gold Medalist electrical Engineer. In the recent past I have done a lot of projects similar to your description. I also have research publications in Microcontroller, Respberry Pi, and currently doing research on FPGA. Expert in logic designing,AI and Machine learning, I am confident I will exceed your expectations. Looking forward to work with you. Regards BrosCreativites

Hello there, I am Wahad Ur Rahman, a Ph.D. student in the field of mechatronics also working as lab Engineer. I have good expertise in the following areas 1. MATLAB programming 2. Internet of things (Arduino ESP32) 3. AI (Machine learning, Deep learning, computer vision) 4. Electronics circuit designing (Proteus, Multisim,Simulink). I have read your project details and I know you need expert in above mentioned areas. I will do your task in least time with reasonable price. For more detail, you can message me anytime. Best Regards Engr. Wahad Ur Rahman Mechatronics Engineer

Greetings, I have done Diploma of Associate Engineer in Electronics and now studying in final year of Electrical Engineering. I have worked with Arduino + different sensors and circuits. I have a learning attitude and can asure you quality work. Looking forward for a positive response. Thanks.

Hi! I’m Mechatronics and control engineer, having more than 3 years of experience in the field of industrial automation and embedded systems. I’ve done many projects based on PLC, SCADA, Stm32, Arduino, Raspberry Pi,Esp8266 boards and their peripheral devices. I’ve good command on PCB designing and Communication protocols. Like ModBus, OPC server/Client, profibus, profinet. I also have profound knowledge of electrical circuit designing and control systems. I can share my past work experience and the projects that’s has been completed so far. Hit me dm so that we can discuss it in a bit a more details. Regards

I am an student of engineering and electronics is my trade. I can do work in electronics related stuff. I can not ensure you that I am the fittest candidate, but I do have interest in electronics and can do your work in a quite efficient manner.