Photon Energy Measurement System

Cerrado Publicado hace 3 años Pagado a la entrega
Cerrado Pagado a la entrega

The system uses a small solar cell (4" square) to measure a matrix of LED's (2" square). The LED's (powered at various voltages) are stepped away from the solar cell in measured increments using a stepper motor. The declining solar cell voltages are recorded manually for processing on EXCEL. A working Phase 1 prototype (based on an Arduino 2560 Mega Processor) is available. A control panel contains push buttons and LED's. The attached picture is a second unit - not yet finished.

The programming task involves the operation of the slide mechanism with limit switches at both ends, the 4 buttons and 2 LED's located vertically on the right side of the control panel. I am reworking the slide mechanism on this unit.

I would like to discuss computer alternatives and programming estimates on a phased implementation.

Arduino Electrónica Microcontrolador Ingeniería eléctrica PLC y SCADA

Nº del proyecto: #25924141

Sobre el proyecto

17 propuestas Proyecto remoto Activo hace 3 años

17 freelancers están ofertando un promedio de $390 por este trabajo

mechatronicsengr

Hi I hope you are doing well. I have expertise in embedded systems programming and I have worked on motor control system. I have worked on many controllers including Arduino. I have understood your project requirem Más

$529 USD en 7 días
(90 comentarios)
6.9
noumanmehtab86

I can help you with this system. I have worked with controlling such systems multiple time. Come in chat to discuss

$300 USD en 10 días
(34 comentarios)
6.6
ircrashed

Hello I have got your job posting “Photon Energy Measurement System Open” and I am very much interested to work in your project. I am a circuit designer and have more than 5 years experience of working with the An Más

$250 USD en 7 días
(59 comentarios)
5.9
consultotal

Hi i'm engineer, Internet of things, machine learning, networking, lighting, power distribution, automation and control expert, i have experience working in electromechanical systems and control - design and building, Más

$1100 USD en 7 días
(12 comentarios)
5.6
JPACHECO28

Hi, Im an experienced developer, specialized in industrial automation I would really like to collaborate with you please chat me to talk about your project's details, I can warranty 100% satisfaction, thank you in adva Más

$300 USD en 8 días
(10 comentarios)
4.7
macroenergy

General message: Dear Sir, Greetings from Turkey. I hope you are good. Let me introduce me. I'm Electronics Enginner who have 19 year experience. My experience is related to power electronics, hardware design, Más

$200 USD en 10 días
(11 comentarios)
4.6
baldofabio

Hi, my name is Fabio Baldo, I'm from Padova, Italy. I'm a senior developer in Industrial Automation. I know very well Siemens S7 and Siemens Tia Portal. I also know Codesys. I programming in Ladder and in St. I progra Más

$250 USD en 7 días
(4 comentarios)
4.4
doroshchuk99

Hello, thank you for your job posting. I am a senior electrical engineer. I have plenty of experience in firmware development and micro-controller developments. I can write the firmware based on Arduino, Raspberry Pi, Más

$750 USD en 7 días
(1 comentario)
4.2
ljayasooriya83

We are a team of electrical engineers and these calculations are very familiar to us. We are very good in using Matlab Simulink, Labview etc., We have helped a lot of students to get high marks in their academic works. Más

$600 USD en 5 días
(12 comentarios)
4.1
stolzenterprises

A competent professional with 10 years of experience in Industrial Automation. Please find below Profile :-- Proficient in Engineering and implementation of PLC Control System, HMI and SCADA Development, testing & comm Más

$222 USD en 10 días
(3 comentarios)
3.7
AdelAGh

Hello, I'm an Electrical Engineer .I have many Experiences in Matlab, Microcontroller, Arduino , sensors ,PLC’s, SCADA system, circuit design , PCB ,also I have experience in programming that connect electronic to de Más

$250 USD en 7 días
(5 comentarios)
3.0
agerald61

Hello, To get repeatable results, you should feed the LEDs with a variable "current" source, rather than variable "voltage" source. Recording the readings should be automated and pro grammatically inserted into an Exce Más

$200 USD en 14 días
(2 comentarios)
1.8
PKonstiantyn

Hello, I am an Electrical and Electronics Engineer and I completed my master's degree. I designed many electronic circuits and led control and I have academic publications on this subject.I can handle t System proj Más

$250 USD en 7 días
(1 comentario)
1.8
princewallymoore

I am an Electrical Engineer with a masters degree and I have high proficiency in Electrical Engineering, HVAC, LTE system model, Thermal system design, FPGA, Verilog/VHDL, Matlab/ Simulink, Microcontroller, Modeling, o Más

$400 USD en 3 días
(0 comentarios)
0.0
danish202

Hi, I am an experienced and Certified PLC programmer having vast experience of programming different brands of PLC'S and HMI. I have carefully read and understood your requirements. It will be pleasure to work with yo Más

$278 USD en 10 días
(0 comentarios)
0.0
rjrajbir24

Wow, Seems like an amazing opportunity !!! My Name is Rajbir Singh an experienced Embedded and IoT Engineer. You would be happy to know that I have more than 5 years of experience working with the Arduino/Steppers/Ser Más

$250 USD en 7 días
(1 comentario)
0.0