New Twist on Home Automation

Cerrado Publicado Sep 25, 2010 Pagado a la entrega
Cerrado Pagado a la entrega

This is my New Member - Free Trial Post. We will see how many replies it generates before we start paying money to an unknown website down under.

I am looking for an experienced microcontroller programmer AND electronics engineer to use an Arduino PIC controller (or similar or one of your own) to operate one of 3 simple peripheral devices singly and in combination ( 2 are 12V and 1 is 120V) in response to change in any of these variables (1) clock or elapsed time; (1a) user defined time interval; (2) ambient temperature and (3) volume of a gas or fluid in a chamber.

The concept is simple enough that I could write "code" in old style Basic (if-then-go to) sufficient for a modern programmer to understand, but I am not C or PERL conversant.

My other problem is that I have literally no idea how "pins" work to send switching signals to remote devices from these microcontroller boards. I would not know a transistor from a resistor or capacitor! I understand that the pic controllers act as switches to cause devices to activate or deactivate in response to changing variables but I have no idea how one goes about "hooking them up" without frying the whole project and peripherals.

This is for the third stage of development of a potential new consumer product as part of a home automation package. The idea is mine and is over 20 years old. It is patentable. It is an invention that stems from "seeing and fulfilling a need" in my own life. There is no other product like it on the market. I have been encouraged by patent attorneys; SBA and small business development experts. This year as I enter retirement from a professional career, I have taken it from a very crude prototype to a fully functional version using custom built and off the shelf components. I have built 2 units. Both have been in my home working perfectly under some pretty "adverse" conditions for 9 months. But they are admittedly mechanical in nature and not-ready-for-prime-time.

I am lacking "computer control". My control system is now almost all electro-mechanical. I need someone to take all of my ideas and in the end come up with a wall mount controller that looks like a modern time/temp based thermostat, i.e. "if Temp =>55 then activate peripheral device A until Temp = 50 then deactivate peripheral device A" or "If time = time + 120 then activate device B for NN seconds". The controller needs to operate any of the 3 peripherals as needed. The successful consultant will provide the finished prototype controller and specs for larger volume production and a diagram "hook white wire from controller to white wire of device A" and "hook Blue wire from controller to Black wire on device B". I want someone who can communicate with me in non-technical plain English while also providing documentation that an IT pro or engineer would understand.

This product will require a small bit of software to ask set-up questions - set time, frequency and desired temperature. Thus I will need a keypad for user input and a simple alphanumeric screen as part of the user interface. I also think battery back up for the controller and peripherals package might be in order. My visionary wife has suggested USB, webcam access and internet access to the controller's function to change settings remotely First things first!

A binding Non-Disclose will be required to give potential partners further information. My intent is that this will be a MADE IN USA product. The ideal partner will be somewhere in the 5 state US Mid-west region to enable face to face meetings and demos but that does not exclude folks from around the world from consulting on it. There is always Skype!

Compensation could be by the hour or a contract price for a turnkey product meeting agreed specs or "piece of the action". I do not know what this is "worth" nor do you because you don't know what the project really "is". Please respond with something that indicates this is in your realm of experience.

Programación en C Ingeniería eléctrica Electrónica Microcontrolador

Nº del proyecto: #805935

Sobre el proyecto

53 propuestas Proyecto remoto Activo Dec 24, 2010

53 freelancers están ofertando un promedio de $1029 por este trabajo

bchandra1955

I am professional automation engineer, See MB, Brajesh

$1200 USD en 90 días
(55 comentarios)
5.8
melsayedhasan

I'm an experienced enginner at microcontroller deign and programming. also I'm a teaching assistant at an electrical college in Egypt.

$750 USD en 20 días
(9 comentarios)
4.9
ValuSoft

Hello, I am interested in your project, but as you say being able to bid a final price is difficult without further details and this website's rules do not allow hourly rates. "IMPORTANT! Don't post any placeholder bid Más

$1000 USD en 45 días
(4 comentarios)
3.6
mastermatlab

Please see my private message for details.

$1400 USD en 14 días
(12 comentarios)
4.7
GreenlightAV

Please see my private message to you for details

$1300 USD en 30 días
(2 comentarios)
3.8
Phil31

Hello, please check PM

$750 USD en 30 días
(1 comentario)
3.3
eldemokraty

please check you PMB

$1200 USD en 60 días
(6 comentarios)
3.3
connic

Long term expirience in similar projects

$1500 USD en 40 días
(3 comentarios)
2.5
AngeloQ

Please see the attached file.

$1000 USD en 30 días
(1 comentario)
1.0
makinreal

See details in MB.

$1200 USD en 30 días
(0 comentarios)
0.0
nishant89

Hello I have been working on the similar project for quite a time, check your PMB for details Nishant

$800 USD en 45 días
(1 comentario)
0.0
gencosoftware01

Please see my private message for details.

$1000 USD en 30 días
(0 comentarios)
0.0
CISIUM

CISIUM Inc. is a engineering service provider specialized in embedded product design, control and automation. This products is core technology and we can implement it fully to your satisfaction. Read your PM for detail Más

$800 USD en 5 días
(0 comentarios)
0.0
mikyduude

Hello, I am a Romanian experienced engineer in the field of Microcontrollers(SW and HW) and Electronics with more than 7 years in background. I have made much more complex Home Made Projects, so your project should no Más

$900 USD en 25 días
(0 comentarios)
1.0
bglabs

I have 22 years of experience and I'm in the midwest.

$750 USD en 30 días
(0 comentarios)
0.0
chandrachoudhary

I can do this

$900 USD en 30 días
(0 comentarios)
0.0
ErKaran007

i am working with such projects since last 5 years. i have very good expertise on PIC microcontrollers. i can make this project for you. actual cost & time can only be discussed after complete discription of project. i Más

$800 USD en 12 días
(0 comentarios)
0.0
adnanahmmad

Hi, Please check you PMB.

$800 USD en 10 días
(0 comentarios)
0.0
Jabershah

We have huge experience in PIC micro. The mostly solutions provided by Automation Junction are based on PIC 18F family. The company have provided solutions for industry. So, we will be very comfortable with the product Más

$750 USD en 40 días
(0 comentarios)
0.0
gpd2007

Please check our PM. Thanks.

$1100 USD en 30 días
(0 comentarios)
0.0