Camera interface (Omnivision OV7690) for Silicon Labs Wireless Kit (Blue Gecko), Embedded Software in Silicon Labs Simplicity Studio using em_lib/em_drv

Cerrado Publicado hace 6 años Pagado a la entrega
Cerrado Pagado a la entrega

This is specific demo project for the Silicon Labs Bluetooth Wireless Kit (SLWSTK6101C) with BGM11S, BGM121 or BGM123 SiP modules using Simplicity IDE.

Interfacing with Omnivision OV7690 camera. This is programmable camera through the Serial Camera Control Bus (SCCB) interface***.

1. You will create Omnivision OV7690 camera interface for the Wireless Kit.

2. You will provide schematic and instructions.

3. You will write camera driver code and example project achieve:

Main();

- Init and open the camera (by specifying resolution (VGA, QVGA etc.) Also other control commands will be send to camera, please check the pdf file***)

- Create circular triple buffer, set interval to 500ms

Loop: While (pb0) button pressed (Wireless kit)

- Take a picture from the camera and put to Circular Triple Buffer[x];

/* Use DMA, take 1 picture continuously for every 500ms till pb0 pressed and recording last 3 pictures. */

goto Loop;

pb0 button pressed:

So we have 3 of pictures in the buffer 500ms each between. Show 3 of pictures on the Wireless Kit's LCD (One by one, 1 second between each picture)

This is just a simple part of the full project. So developer may expect to get more parts after job has done (Including camera and other modules related). This will be long term project with many parts/modules will be developed.

*** Omnivision OV7690's datasheet uploaded/attached. You can find detailed information there.

Programación en C Ingeniería eléctrica Electrónica Software integrado Microcontrolador

Nº del proyecto: #16379059

Sobre el proyecto

7 propuestas Proyecto remoto Activo hace 5 años

7 freelancers están ofertando un promedio de $488 por este trabajo

highfliercnr

Dear Sir, If you are looking for an highly skilled hardware engineer, I believe that I am the one who you're looking for. I am also an experienced PCB designer who has over 16 years design experience on complex PCB Más

$555 USD en 10 días
(69 comentarios)
7.6
UZelectronics

Hello, We are a team of embedded engineers and familiar with Simplicity Studio and Gecko Boards. We will be happy to work with you on this project. Regards UZtechnology

$555 USD en 10 días
(5 comentarios)
3.8
yousefgehad97

Embedded software engineer, worked on safe house, security of houses, and Car interfacing... Contact me.

$500 USD en 10 días
(2 comentarios)
1.3
johnbobby1986

Hello, My name is John, I am a Professional Programmer since 2008, I have many programs developed and successfully finished in my past employer, I am expert in IT Industry both Hardware and Software Programming, I w Más

$250 USD en 7 días
(0 comentarios)
0.0