Professional electronic engineer !!!

Hi I am experienced electronics engineer with more than 11 years of experience. I can do it for you. I have worked on multiple skills set before. Please get in touch I can give you 25 hours a week Regards

Hi There I -Tech is happy to offer their services for design and prototyping of electronic circuits. Our main target is client satisfaction. Please feel free to contact us. Best Regards, Shahbaz. Relevant Skills and Experience We have quick prototyping facility under one roof. Looking forward to work with you.

Hello, my name is Maria. I am an electronic engineer with a lot of experienice in esp286 and esp32 programs. Please write me for more information regarding your requeriment. I am available for long term relationship. Regards

Hello I have got your job posting “Professional electronic engineer” and I am very much interested to work in your project. I am a circuit designer and have more than 5 years experience of working with the Analog/Digital Electronics Embedded systems(Arduino,ESP,Rasberry pi ,ARM processors ,FPGAs,PIC microcontrollers,Wireless boards,TFT Touch Displays,All types of sensors and actuators). i have done tons of similar projects So, I think you’ll find that, I have the skills you’re looking for. For more on my skills and successfully finished projects, please have a look on my Profile and Portfolio. I have all the components you mentioned available here with me so i will develop a working prototype according to your specifications and then send you the code and schematics so things will work for sure.I will remotely guide you and help you build the system on your side. I am always available on Email and Skype. Please have a voice or video chat if necessary. I shall be available round the clock and able to start your project as soon as possible according to you. Thank you for your consideration, Best Regards, Haseeb Shafqat

Hi. I have a rich experience of design and simulation about RF and electronic circuit using vivado sdk Cadence , Altium, ADS, HFSS ,CST and so on for 10+ years ago. I have many experiences for embeded system such as microcontroller , FPGA, DSP and Arm such as zynq, stm32, pic, raspberry pi, arduino , pic and so on. I have many boards for them. Best Regards

Our team consists of an electronic engineer, a software engineer. We can work 40 hours a week. I can send examples of some works by mail.

Hi there! My name is Fernando and I'm very interested in your proyect and would be happy to work on it. I'm a Senior FPGA Designer/Developer and I'm a Senior Electronic Engineer with 6+ years of experience in the Aerospace and IoT industries. Also, I belong to the Preferred Freelancer team, which is the elite top 1% of Freelancer.com. What FPGA do you plan to use? I would like to know more details about your project. I have experience with STM32. You can trust that I will give my best to deliver a work that exceeds your expectations. Thanks for your consideration. Best regards

Hello i am experienced professional c/c++ developer, very good in both windows and Linux OS and very good in Embedded programming. i have already worked on esp8266. i can work on full time on this project. Please share project details so we can discuss.

Hi, I am an embedded software engineer with hands-on experience in stm32 and FPGA. I was working with different platforms like cypress, Freescale, stm32 and I can help you with ESP32. My skills are backed by experience from a professional field. I am also interested in long term cooperation. If you are interested please leave me message. Best regards, Piotr

Hi. I am Electronics Engineer and I have more than five years experience in embedded systems designing. I also can speak Chinese. I have done hundreds of projects successfully. We can discuss further details of work in chat. Thanks

I've been working with microcontrollers last 10 years. I have all the hardware to make this job. I have all the qualities that you are looking for. I have a strong belief that I would be able to make this project successful within short time. I will testing completely and write intelligible comments on each program step. And I will answer all your questions. I will give you advice in this area, and after the end of the job, as much as you'll need. I am very interested in the accumulation of work history and regular customers. I have a long term plan to work in here, that’s why I am here with all qualities and experiences. I am here not to cheat you rather help you. The last device which I made this Base Station Controller. 2 uC STM32F373. 74 analog inputs(ADC) (with a possibility of reassignment of functions). 16 relays. 8 digital inputs. SD memory card, CAN Interface, USB, SPI Interface ,USART Interface, 1-wire Interface, Ethernet(UDP,TCP/IP, FTP), RS-485 Interface ,TFT screen, GSM-modem, heating. 8 user buttons. Analog and digital sensors of temperature/pressure/humidity. Control of single/three-phase mains (definition of frequency, imbalance, health). Control of single/three-phase generator (gas/diesel/petrol). Control wind turbine, solar panel. Measurement 24 battery cells, identify the faulty resistance. Control refueling of fuel tanks (the definition of theft, leakage and other faults). Sending messages about emergency events via GSM, Ethernet.

Post graduate in embedded engineer worked on ESP32, STM32F407, Arduino UNO, Communication protocol(UART, I2C, CAN, SPI). PROJECTS -AUTMATIC WEATHER CONTROL IN AUTOMOBILES USING CAN

Hello Employer When I was Electrical engineering student I always did projects like this and now I always work with stm32 and esp8266. If you choose me you'll never regret.

hi, I have 2+ years of experience in the design and development of embedded software, I have expertise in Embedded Design, C, driver and application, arm, raspberry pi, stm32,stm8, etc. I would like to do this project for you. I am quite good at C. Message me to discuss more details about your project.

I have done a lot of projects related to esp8266, arduino. . . . Also I can design pcb for integrated circuit.

I'm an electronic engineer with more than 15 years of work experience. I work as HW designer; FW and SW developer. As HW designer, I work in Altium, KiCad and Orcad and I have experience in development single MCU (Microchip PIC and ARM Cortex) boards with several digital I/O (GPIO, UART, SPI, I2C, PWM,....) and some analog I/O. I design complete board: power section, MCU section, peripheral section,.... I design also boards with battery power; so I have experience in low power PCB design. I have also experience in commercial boards (Arduino, Raspberry, Beaglebone,...) shields design. I have also experience in bluetooth (both 2.0 and 4.0) PCB design. As FW developer, usually I work in C for Microchip PIC (MPLAB X + XC compilers) and Eclipse + GNU ARM for different ARM Cortex M0/M0+/M3/M4 manufacturers (STM32Fx, NXP, EFM32 SiLabs, but I'm ready to learn new frameworks). I work with both single task and multi task environment (FreeRTOS and RTX). I write code both for low level driver (GPIO, UART, SPI, I2C, PWM....) management, for high level/final application, for bootloader and for OTA. I work also in "C code" commercial boards Arduino/ESP32/ESP8266 and Linux embedded commercial boards (Raspberry and Beaglebone). I have also experience in bluetooth (both 2.0 and 4.0) programming. As SW developer, I work in C, C++, .NET, Java, and lot of others programming languages. Mainly I work for Windows O.S., but I have experience in Linux development too.

hy, i have experience on Stm32 neocleo,dicovery boards. i have done many projects on stm32f407 controller.

Hi, Good Day! I have hands on experience in microcontroller, microprocessor and interfaces with keyboard, LCD display and other peripherals, with overall experience of 12 years in electronics design and development. Have worked in aerospace industry and designing components to work at extreme temperatures and testing the board at various temperatures. Have involved in all the phases of the delivery of the project in circuit design, PCB design, testing and deploying the board. Looking forward for your response. Thanks and Regards, Gopi Manimuthu

Hi, how are you?. i have worked many projects using esp8266,esp32, stm32 and others microcontrollers. So i think i will match with your requirement. Thanks!