Find Jobs
Hire Freelancers

Wire Heating Device Design Engineer - Lithium Ion Battery-Powered Solution

$250-750 USD

Cerrado
Publicado hace 10 meses

$250-750 USD

Pagado a la entrega
I am seeking a skilled Device Design Engineer to create a wire-heating device for my project. The device needs to be powered by a rechargeable Lithium-Ion battery designed to heat wire to a temperature below 100°F. The wire length is between 3-5 meters. I attempted to build a similar device using a steering wheel heating wire I purchased on eBay (0.03ohm) and a 4-cell 6V battery box, but it consistently overheats. Therefore, I seek an expert who can design a reliable and efficient solution. The ideal candidate should have experience in designing small and lightweight devices. The required voltage for the Lithium-Ion battery is yet to be determined, so your expertise in selecting the appropriate battery configuration will be valuable. Note: Any suggestions or alternative approaches to achieve the desired temperature range and power efficiency are welcome.
ID del proyecto: 36713396

Información sobre el proyecto

22 propuestas
Proyecto remoto
Activo hace 9 meses

¿Buscas ganar dinero?

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto
Cobra por tu trabajo
Describe tu propuesta
Es gratis registrarse y presentar ofertas en los trabajos
22 freelancers están ofertando un promedio de $562 USD por este trabajo
Avatar del usuario
I understand you are seeking a Device Design Engineer to create a wire-heating device for your project. My background is related with electrical engineering, electronics, circuit design, PCB layout and product design which makes me the best fit for this job. My experience in designing small and lightweight devices will be invaluable when it comes to designing the required heating device for the wire length between 3-5 meters. Additionally, my expertise in selecting the appropriate battery configuration will be beneficial in ensuring reliability and efficiency. My past work has focused on developing energy efficient solutions for various applications such as solar energy systems and wireless temperature sensors. This makes me well-suited for your project as I have the necessary skills required to create a solution that meets your needs.
$250 USD en 7 días
4,8 (86 comentarios)
6,9
6,9
Avatar del usuario
Hello I have got your job posting “Wire Heating Device Design Engineer - Lithium Ion Battery-Powered Solution” and I am very much interested to work in your project. I am a circuit designer and have more than 5 years experience of working with the Analog/Digital Electronics embedded systems(Arduino, Rasberry pi ,ARM processors ,PIC microcontrollers, ESP Wifi/Wireless boards,TFT Touch Displays,All types of sensors and actuators).I have done tons of similar projects So, I think you’ll find that, I have the skills you’re looking for. For more on my skills and successfully finished projects, please have a look on my Profile and Portfolio. I have all the components available here with me so I will develop a working prototype according to your specifications and then send you the code and schematics so things will work for sure. I will remotely guide you and help you build the system on your side. I am always available on Email and Skype. Please have a voice or video chat if necessary. I shall be available round the clock and able to start your project as soon as possible according to you. Thank you for your consideration, Best Regards, Haseeb Shafqat
$500 USD en 7 días
4,9 (58 comentarios)
6,2
6,2
Avatar del usuario
Hi there, I'm bidding on your project "Wire Heating Device Design Engineer - Lithium Ion Battery-Powered Solution" Being a professional electrical engineer, I can do this project for you. please leave a message on my chat so we can discuss the budget and deadline of the project. Also, have a look at my profile for my reviews and portfolios. Thanks Note: This is not an automated bid and i'm ready to discuss your project right now. .. .
$750 USD en 4 días
4,8 (12 comentarios)
6,0
6,0
Avatar del usuario
We need to take care of heat going out by radiation and see that heat input and heat radiated are balance at desired 100 deg Temperature, Wire outer diameter texture all will play a roll I am professional engineer with 43 years of engineering problem solving skill
$450 USD en 7 días
4,5 (70 comentarios)
6,1
6,1
Avatar del usuario
Hello, my name is Muhammad Adeel, and I am an electrical engineer with expertise in device design, electrical engineering, electronics, and PCB layout. I understand that you are seeking a skilled Device Design Engineer to create a wire-heating device for your project. The device needs to be powered by a rechargeable Lithium-Ion battery designed to heat wire to a temperature below 100°F within 3-5 meters of length. I believe that my skillset and experience make me the right person for the job - specifically my expertise in selecting the appropriate battery configuration for the wire heating device. Additionally, I have extensive experience in designing small and lightweight devices which will be required for this project. Please feel free to reach out if you have any questions or would like me to further explain my proposal..
$450 USD en 7 días
4,9 (46 comentarios)
5,8
5,8
Avatar del usuario
Hello there! My name is Md Raseduzzaman, and I'm an established, heavily experienced Embedded Systems Engineer with 4 years of experience in PCB Designs and Microcontroller Development. I understand how important it is for you to create a wire heating device that can be powered by a rechargeable Lithium-Ion battery designed to heat wire to a temperature below 100°F. I have the expertise necessary to create the solution you're looking for: I have experience in designing small and lightweight devices (specifically, I've done this before), as well as skill sets such as Circuit Design, Electrical Engineering, Electronics and PCB Layout that could be useful in creating this project. Moreover, my services include constant quality assurance checks along with proper documentation of all accompanying files. I would be delighted to discuss further the possibility of working together on your project. Please feel free to contact me if you have any questions or would like me to provide any further information about my services. Best regards!
$500 USD en 7 días
4,9 (20 comentarios)
5,4
5,4
Avatar del usuario
Best Heating Device Design Expert! ⭐ ⭐ ⭐ ⭐ ⭐ ⭐ Dear Client, I am a seasoned Device Design Engineer with 30+ years of experience in electronics design, circuit design, and PCB Design. I can create a reliable wire-heating device powered by Lithium-Ion battery, heating wire to a temperature below 100°F. Wire length: 3-5 meters. ✅Previous attempts using a 0.03ohm steering wheel heating wire and a 4-cell 6V battery box consistently overheated. I offer expertise in designing small, lightweight devices and will ensure an efficient solution. The required Lithium-Ion battery voltage will be determined, benefiting from my battery configuration knowledge. ✅I welcome suggestions and alternative approaches to enhance the temperature range and power efficiency of the device. Your input is valuable, and I will work closely with you to explore innovative possibilities and incorporate them into the final design. Questions: ⭐Could you provide details about the application or industry where the wire-heating device will be used? ⭐Are there any specific size or weight constraints for the device? I am excited about the opportunity to collaborate with you on this project and bring your vision to life. With my extensive experience, commitment to excellence, and focus on client satisfaction, I am confident in delivering wire heating device that fulfills your requirements. Thank you for considering my proposal, and I look forward to discussing further details with you. Best Regards Hari Mohan
$500 USD en 2 días
5,0 (7 comentarios)
5,3
5,3
Avatar del usuario
Hello | am a verified engineer and preferred freelancer and | have more than 15 years of experience in the embedded systems design and pcb design and electronics systems design. And have good experience in wire heater , So let's discuss your project in chat.
$500 USD en 7 días
5,0 (20 comentarios)
5,0
5,0
Avatar del usuario
Hello. ⭐ ⭐ ⭐ ⭐ ⭐ I have been working for more than 10 Year in the field of Electronic engineering (Hardware / Firmware). I have extensive experience in the areas including Circuit Design, Circuit Simulation (Analog, Digital), PCB design, Embedded Software(Keil, Mplab, FPGA, Arduino, PIC, Rasberry PI, C/C++) etc. Expect me to help your business as if I am growing my own. I would love to hear from you. Warm regards Khalid
$500 USD en 7 días
5,0 (4 comentarios)
4,1
4,1
Avatar del usuario
Good morning, I propose a power controlling circuit which outputs between 0-100%. The load is determined by the user, there would be no automatic control loop at this point, since we need a way to measure the wire temperature. So in this solution you calibrate the wire / percentage first. Simple solution first, to see if this meets your purpose. Regards, Jean-François
$500 USD en 7 días
5,0 (1 comentario)
4,0
4,0
Avatar del usuario
My name is Manish and I am an experienced Product Design Engineer with extensive knowledge in mechanical engineering, product development design and graphic design. From my past projects, you can see that I have a commitment to quality and commitment to the project at the same place. I understand that you are seeking for a skilled Device Design Engineer to create a wire-heating device for your project. With my expertise in designing small and lightweight devices, I am confident that I can provide the best solution possible for your heating needs. Additionally, I have experience in selecting the appropriate battery configuration for the system - this is something that is important to determine before designing the system so that it meets your needs without overheating along the way. I would be delighted to discuss any project you may have in mind requiring my skillset. Please feel free to contact me if you require any further information or if you want me to clarify any part of my proposal. Thank you!
$850 USD en 7 días
4,8 (2 comentarios)
2,7
2,7
Avatar del usuario
The best hardware design expert! ⭐ ⭐ ⭐ ⭐ ⭐ ⭐ Dear customer, As an experienced freelancer with over 30 years of expertise in device design, circuit design and PCB design, we are happy to work with you on your heating device development. ✅I already have experience designing a stability circuit that warms the heating wire (using 9V battery power supply) Working together, we will focus on the following aspects: ✅We have professional knowledge and rich experience in power circuits question: ⭐Need smooth temperature and temperature control of the wire to be warmed up? ⭐Please tell us exactly the performance of the battery If you are interested, I would appreciate it if you could send me a private message about the details and plans of the eye tracker project. I want to start this exciting journey with you. dear
$250 USD en 5 días
3,6 (2 comentarios)
2,4
2,4
Avatar del usuario
I am a professional lithium ion lithium polymer ,lithium iron phosphate battery designer and battery power packs maker .I have more than 5 years experience in battery design and prototyping . If you need assistant about battery manufacturing ,power packs design of different voltages ,capacity ,watt hour and size then feel free to contact. I had worked on almost all kind of lithium battery project like Lithium Ion battery Lithium polymer battery Lithium iron phosphate LiMno2 BMS. Battery Electronics. Spot welding of cell Battery case design. I can help in selection of cells of different capacity and size including their discharge rating ,selection of suitable BMS(Battery Management System). I can assist in calculation of battery voltages, capacity and Watt/Hours in series, parallel connection .I have a wide knowledge of battery related projects and on hand training of lithium battery designing, cells spot welding ,soldering of wires and BMS installation in specific battery size .Cells charge discharge criteria and safety related aspects .I can assist you in selection of suitable battery for you projects.
$500 USD en 7 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
⭐⭐⭐Full PCB Rules +STM32 Firmware +Lots of Experience=SCUCUSCES!⭐⭐⭐ Hello dear client nice to meet you I think I'm exactly what you're looking for.? I've seen your requirements and fully understand them. I am Teresa B, an accomplished PCB designer and electronic engineer from USA. He is also an expert in writing firmware for STM32F series, ESP32, PIC, DsPIC and more. I have a wealth of knowledge and experience with Altium and Kicad, Eagle, and have done many projects using them, providing Gerber files, CSV, BOM files and 3D files for production use. While designing a PCB to achieve signal separation, ground relaxation, folding elimination and required complete resistance, we set the rules according to the manufacturer's ability and proceed with a reasonable arrangement to optimize the design. The key to design is the correct selection of inexpensive, manufacturer-available, low-cost components. A PCB manufacturer like JLCPCB PCBWAY knows all the steps required for manufacturing, and we'll be happy to answer your questions fully to ensure your project is completed as quickly as possible. With high technology, creativity, diligence and dedication, we will faithfully work until the customer's needs are satisfied and provide satisfactory results. For more details, please discuss in detail through conversation. thank you
$750 USD en 7 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
I have a lot of trainings and internships in my field.I also have experience in electrical maintenance, supervising the operation of machines and good planning to follow up on machine malfunctions Skills: PLC .MOTOR .DRIVES .SCADA .HMI .Circuit design. Slicing and cutting lines expert
$500 USD en 5 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
I hope this message finds you well. I am reaching out to express my interest in working on your project as a PCB design engineer. With 2 and a half years of experience in PCB designing, I am confident in my ability to contribute to the success of your project. I have carefully reviewed your company and the project requirements, and I am impressed with the work you are doing in [specific industry or area]. It aligns perfectly with my passion for PCB design and my expertise in the field. During my previous experience, I have successfully completed various PCB design projects, ranging from complex multilayer boards to high-speed designs. I have honed my skills in using industry-standard tools such as Altium Designer, Eagle, and OrCAD, and I am well-versed in schematic capture, layout design, and signal integrity analysis.
$500 USD en 7 días
0,0 (0 comentarios)
0,0
0,0

Sobre este cliente

Bandera de UNITED STATES
Naples, United States
0,0
0
Forma de pago verificada
Miembro desde jun 6, 2023

Verificación del cliente

¡Gracias! Te hemos enviado un enlace para reclamar tu crédito gratuito.
Algo salió mal al enviar tu correo electrónico. Por favor, intenta de nuevo.
Usuarios registrados Total de empleos publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Cargando visualización previa
Permiso concedido para Geolocalización.
Tu sesión de acceso ha expirado y has sido desconectado. Por favor, inica sesión nuevamente.