Car Parking Device Enclosure design

$50-80 USD

Cerrado

Publicado

hace más de 5 años

$50-80 USD

Pagado a la entrega

Dear Freelancer, I need a CAD designer for designing an enclosure (Parking Sensor Enclosure design) for an Electronic/PCB project that we have recently completed. Please refer project description as listed below prior sending me you proposal. Project Requirements: • Based on our specifications we need a 3D designer to finalize a design (Fusion360 preferably) which will be in 2 or more parts and ready for 3D prints (1st prototype). • Expect a few iterations during the project time, i.e. come up with your ideas/suggestions most welcome. • Drawings showing dimensions of the different components in the design are available. • All dimensions must be in mm. • The final design must be stl-file(s) ready for 3D plastic print for prototyping and later-on for mould injection. • PCB Size (30.9 x 67.6) mm EXCLUDING the battery, normally 2xAA batteries. • output should be similar to the attachment. Note: The Enclosure including the device will be placed outdoor, enclosure should be protected against water (Waterproof) and Debris and should be rigid enough to sustain any vehicle wheel if ever crossed. Looking forward hearing from you

ID del proyecto: 17531602

Información sobre el proyecto

39 propuestas

Proyecto remoto

Activo hace 6 años

¿Buscas ganar dinero?

Dirección de email

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto

Cobra por tu trabajo

Describe tu propuesta

Es gratis registrarse y presentar ofertas en los trabajos

39 freelancers están ofertando un promedio de $75 USD por este trabajo

@Tarjanhokey

I am a CAD designer. I have many experience in enclosure design. I am familiar in plastic injection mold design. I can complete your projects with a high quality and within a short time.

$72 USD en 1 día

4,9

(173 comentarios)

7,1

@marthakprashant

Hello sir, I checked the description that you mentioned below. That what I was waiting for to do it. Its really amazing work and I will provide you the best and unique effect in this project.I have great experience in the same field. I hope you love to work with me. Please check once my Portfolio.

$72 USD en 10 días

4,8

(155 comentarios)

6,6

@ahmedhamdypop

Hello There, This is Ahmed Hamdy a product designer and manufacturer, I have been working in this field for many years, I can do either the design or the manufacturing of this enclosure. I have my factory which I could manufacture anything. moreover, I can ship you any qualities from Egypt. also I'm a Sr. Lecturer at the American University in Cairo, where I'm Teaching the principles of Design and manufacturing there. This is why I hope to be selected for this wonderful project. Thanks in advance Ahmed Hamdy

$50 USD en 0 día

5,0

(75 comentarios)

6,3

@Deep0001K

Hello I'm Navdeep. I have done a lot of similar work and deem myself able to complete your work with best quality .To see my sample work, please send me a message.

$72 USD en 10 días

4,8

(144 comentarios)

6,1

@xabhix

Hi there, I am an experienced mechanical design engineer in the design and development of a product. My skills are CAD/CAM, product design, 3D design, 3D modeling, molding, rendering, making CAD model from photos, etc. in CATIA software as well as AutoCAD. I have read job descriptions and I am able to do this job. you can check my portfolios from my profile. I can provide you the best service for your job. I provide you changes in design after delivering of design if required. we can discuss your project as well as if you want to know more information about me ask me in a message. regards, abhi.....

$55 USD en 3 días

4,9

(45 comentarios)

5,8

@Abanoubmlak

Hello sir, My name is Abanoub Malak, a mechanical engineering ,, I am specialist in product design and 3D modelling with a more than 4 years experience and working as a teacher assistant teaching the major courses in product design and CAD/CAM.. So, if you are look for high quality with low price you can contact me ,, AND HEY,, DO NOT PAY EVEN ONE CENT TILL YOU GET 100% SATISFACTION.. You can try this over chat before you award me .. just try my and you will not regret.. best regards, Abanoub Malak

$50 USD en 0 día

5,0

(44 comentarios)

5,8

@engyoussief

I am a mechanical engineer. I have strong experience with design, manufacturing and 3D printing. I have checked your project and attached photos and i am sure that i can design the required enclosure as per your request.

$50 USD en 2 días

4,8

(89 comentarios)

6,0

@abhayky93

You want design of enclosure device for car parking.

$50 USD en 3 días

4,9

(94 comentarios)

5,6

@thanhbinh160886

I am here to bring your product to life. I'm a mechanical engineer and I have 8 experience years. Experience type: 3D, 2D models, Render, Sheet metals, Machine and Devices, industrial product, Plastic molds, plastic parts Software program: Autodesk Inventor,Solidworks, Autocad , NX-Siemens I am always glad to cooperate, I guarantee quick lead-time and free revisions and required. Your project will be developed with speed and high quality, as well as all the jobs already accomplished. Please send me a message.

$80 USD en 3 días

4,7

(32 comentarios)

5,6

@CDesindore

Dear Hiring manager, I am a Mechanical Engineer working in the designing field since more than 4.5 years. I have worked with many clients for designing, rendering, 3D printing projects. I looked into your request. I do the designing and modelling of the parts and products. I can do this project and will do the designing and modelling of the required PCB enclosure shown in the attached image files as per the design parameters. I will share the designed files in the specified format and will also assist you with the further proceedings of the project. I have experience with 3D Modelling, Rendering and Product design. I have expertise with 3D Modelling in Solidworks 2017, CATIA V5R20, Fusion 360 and other Autodesk tools. I can also provide you 3D printed model and prototypes of the product if you require. Please have a look at my portfolio for work samples. The project cost mentioned here in the bid is not final, it may differ on the basis of design and would be finalized in the discussion. We can discuss more about the project on chat. Looking forward to hear to you regarding this opportunity. Warm Regards Himanshu

$88 USD en 10 días

4,9

(25 comentarios)

5,0

@etequetaqui

Hello. My name is Bernardus Romero. I'm an Industrial Designer with 6 years of experience helping SMEs and startups innovate through their products, from the napkin sketch to production. I would be glad to join and help you finish the design of your device's case, iterations included. I can also assist you on some other tasks like 3D renderings and drawings if needed. We can discuss the project over chat and set a plan with clear milestones and deadlines. Please don't let the low price fool you. You're getting professional service with full customer support, and I need to build my ranking on this site.

$54 USD en 4 días

5,0

(6 comentarios)

4,8

@heshamelqady

I am a 3D printing specialist with 5 years of experience in SolidWorks, I am working in a 3D printing service bureau I will provide Printable STL Model and detailed drawings with exploded/detailed views and an exploded assembly video to make everything very clear Kindly check my profile/portfolio and contact me if interested in any of my services Regards

$70 USD en 10 días

5,0

(18 comentarios)

5,0

@GraphicLand12

Dear you need a CAD designer Hello, We are very interested for this project. i have all the experience and expertise on similar work, I can do all type of like 3D modling,after effect I am excited about thd word k like Modling ,animatd and 3d animation Upon seeing your online post for an experien ced2D & 3D artist I went straight to your post to send off my resume for your review. I have been in the business for four years and of course am familiar with the innovative and impressive work . Thanks & Regards Anish Jaggi

$72 USD en 1 día

4,2

(24 comentarios)

4,6

@Deeayus

Hi, My name is Dee, Its quite interesting you're located in Mauritius as my family are from there and I am heading over there myself in September, I have taken a look at the information you have provided and would like to take this project on. The software I use is Solidworks but I can design what you require and make changes if necessary. will you require 3d renders with this also? A little bit about me I am a product designer and this is my area of expertise, I have worked on many advertising materials and 3d products as a full-time designer and for my own use I am now venturing into the freelance market and would like to be considered for this proposal. Kindly take a look at my portfolio of work. if you require more information please let me know. Kind regards Dee

$80 USD en 3 días

5,0

(1 comentario)

3,6

@shusian605

Hi, After reading your product brief, I learnt you need an product optimization of Parking Sensor Enclosure Design, this is not a not complex project. I can assist you with 3D Modeling and 2D Technical Drawing. Feel free to discuss over chat further in details.

$66 USD en 2 días

5,0

(3 comentarios)

2,7

@akkywants

Hi, I have gone through your requirements of Car Parking Device Enclosure design. We have been bringing interior design-and-build solutions to leading companies around the globe. Specializing in the restaurant, retail, and education industries, we help businesses get noticed. Our Expertise: 1. Develop 3D rendering proficiency, studio and prelim production knowledge base through training and collaboration with CAD, Design, Projects Managers, and Studio Art departments 2. Utilizes CAD and Revit skill experts in building floor plans, perimeters, elevations and presentations as needed. 3. Assist the BIM Lead with creating Revit families, maintaining existing templates, creating new Portfolio templates and working with type catalogs. 4. Proficient in 3D parametric modeling to maximize the benefits of an integrated building model. 5. Excellent skills in relation to rendering and graphic formats and their manipulation and output. I would like to understand your project requirements in detail before giving the final quote. Let me know if you are available for the quick discussion.. Best Regards, Akhil S.

$72 USD en 10 días

5,0

(1 comentario)

2,8

@jimmycohen

I am a mechanical Engineer who works in the area of technology, as my time is valuable I will only send you a proposal for an advance of 30 usd. I think if you want to check my work you can always go to my profile. I suggest you do a contest if you want to make a selection of talents It will be a pleasure to do business with you

$133 USD en 5 días

5,0

(1 comentario)

2,6

@bobby456

Hello, Having good design skills on cad, this enclosure looks to be simple? for water proofing rubber gasket should be ideal, i think the battery compartment requires a cover too, standoff will be required to bear a vehicle load , does the pcb can accomodate the holes for stanfoffs. Is there cad available for the internal parts( though sizes in drawing will also do) let me know , i can submit proposals thanks

$222 USD en 8 días

5,0

(1 comentario)

0,8

@amirazeem524

""Dear Next Employer We will give you the best result by using my Past experience and excellent academic and professional skills on your project. You can chat with me and let's get started, I'm ready to show you samples of similar projects I've completed. Thanks""

$55 USD en 2 días

0,0

(0 comentarios)

0,0

@serion95

-I am mechanical engineer that have been work in many company Mecaplast from Zrenjanin (that is making plastic part mainly for car inner parts), Apatin brewery, Sinvoz from Zrenjanin(that is making train wagons and rails), -I work in programs for Engineering purpose like Autodesk Inventor, AutoCAD, AutoCAD mechanical. I also work a little bit in Solidworks but I am not prefering it. -I am creating 3d models for 3d printing and presentation I am also making Drafts and 3d rendering also FEA.

$72 USD en 10 días