Gstreamer rtspsrctrabajos

The goal is to make a gstreamer plugin to convert audio samples into a still image or a video. The audio have two channels for x and y delta movements of a laser pointer, which should be converted into line drawn on a picture. If output is redirected to a movie, the lines should disappear after being visible for 20 milliseconds (should be configurable). For example, two synchronized sine waves in left and right channel will produce a tilted line. Two sine waves offseted by 180 degrees will produce a circle. The input and output the plugin should handle is: still picture: x-raw-int -> image/png x-raw-int -> image/svg movie: x-raw-int -> image/png, framerate=60/1 x-raw-int -> image/svg, framerate=60/1 x-raw-int -> video/x-raw-rgb x-raw-int -> video/...

We are looking for someone to assist urgently in a relatively simple project involving creating a gstreamer application to run on the embedded SBC Freescale Sabre-Lite iMX6 (ARM) platform. Currently we have a pre-compiled version of a Boundary Devices Linux OS, but we might be looking for you create a custom build linux stripped down to bare functionality required by our application. Functionality required: - to play a video file or image sequence - to seamlessly jump to any given frame within the sequence - control to be via simple logic controlled by a thermopile (thermal sensor on I2C interface) connected to the embedded computer. Logic: - when no person is detected (non-interactive mode) the video playback will loop between frames AAAA and BBBB - when a person is de...

Live transcode from 1980p 30fps H.264 to Lower bitrate 1980p 30fps. Optional will be the possibility to change the bitrate on the fly. Input will be MPEGTS over UDP output MPEGTS over UDP. Preferrably using gstreamer platform and Hardware SIMD NEON. If the Cubieboard isn't enough powerful for the duty, suggest another Low cost board.

...input/output is used source/sink element from *GStreamer* library (e.g. filesrc/filesink). For example we will be able to send audio to other side of the call using the filesrc element and receive audio from other side of the call using the filesink element. n* The source code has to work with the latest stable Linux OS (e.g. Debian).n* You can use any library you want. nnThere is possibility to write the app in C/C++, but there is also need to write a Python binding (or interface, e.g. RPC and GStreamer RTP source/sink) on the top of the C/C++ source code to control application.nn# Our ProgressnWe tried 3 libraries so far. nn*PJSIP*: We were able to make a call and send/record WAV file to/from other side of the call. In order to connect GStreamer library to PJSIP t...

I am looking for a simple Python example of SIP VoIP client, which will be able to do following: 1. REGISTER to SIP VoIP Asterisk account 2. Initiate a call, where media input/output is used source/sink element from GStreamer library (e.g. filesrc/filesink) 3. Receive a call, where media input/output is used source/sink element from GStreamer library (e.g. filesrc/filesink) It has to work on Linux OS. You can use any library you want.

We need Gstreamer developers and c# programmers for our project. The project is about building a satellite tracking and decoding frquency program using gstreamer Quadrature Library - libgstiq based on this model: model wich will be improved by you. All the work will be made on Ubuntu Studio with gstreamer 0.10 The selected candidate will have to pass a test, to see if it has knowledge in working with GStreamer plugins and test is attached bellow. We will not choose someone who does not pass the test It's a small project because a model murx exist already, and you only need to improve the have some ideea's about the improvements, but we are open

We need Gstreamer developers and c# programmers for our project. The project is about building a satellite tracking and decoding frquency program using gstreamer Quadrature Library - libgstiq based on this model: model wich will be improved by you. All the work will be made on Ubuntu Studio with gstreamer 0.10 The selected candidate will have to pass a test, to see if it has knowledge in working with GStreamer plugins and test is attached bellow. We will not choose someone who does not pass the test It's a small project because a model murx exist already, and you only need to improve the have some ideea's about the improvements, but we are open

Looking for a very elegant solution which would allow me to compile all open source libs I need(based on project target) and home developed libraries/application...base/archive would be the same in all cases. The solution should allow to tweak options to build the individual open source components (eg: serve the purpose of ./configure on many open source projects). The latest version of of the open source projects below are required to be present by default: libssh2,openssl,curl(with openssl support,https,ldap,ftp,rtsp,rtp,rtmp support),curlpp,ffmpeg,gstreamer,libxml++, opencv,libxml2,jsoncpp,libzip,tidy,sqlite,zlib At the end of the build, there should be a big "myBIGLIB.a" static lib which can be linked with the main app. Any tool like CMake etc can be used, ...

Hi, we are looking for developer that has experience in Gstreamer coding, embedded development, OpenGL and video streaming (MPEG TS). You will be working on various tasks, mostly Gstreamer hacking and some OpenGL developing. We are looking forward to honest and long term cooperation with you. Thank you for reading this application and happy bidding! Regards, David

This is a ONE HOUR JOB. 25$ for the base job, and 2 x 15$ for base + extra. Base job: I want a playbin in gstreamer built in C code to use a custom videosink and put the video into a 'gtk_drawing_area' named "video_base". Extra Job: Make the playbin take source URI as a variable. Want it done within 2 workdays.

I want a snippet of C code to build into my project. I will be playing a h.264 video with no audio. It will be integrated into an overlay. Thus this person also has to have basic knowledge of GDK, X11 to point the xvideosink to a "gtk_drawing_area" on a window, named "video_area".

Hi, we are looking for developer that has experience in Gstreamer coding, embedded development, OpenGL and video streaming (MPEG TS). You will be working on various tasks, mostly Gstreamer hacking and some OpenGL developing. We are looking forward to honest and long term cooperation with you. Thank you for reading this application and happy bidding! Regards, David

Specification: A project to develop a base design that uses gstreamer to take VGA video (640x480) in RGB 24bit format from a video capture device. Have an Encoder block that multiplies R-component by 2, G-component by 4 and B-component by 8. Have a Decoder block that divides R-component by 2, G-component by 4 and B-component by 8. Display Decoded video on screen in real-time. Full development instruction should be documented. Full source code and documentation should be supplied. Please respond with your quotation and I will review and respond as soon as possible. I have listed the project budget as simple (€30-€250) as I am required to include a budget, there is a possibility to be flexible if required. Thank you

Specification: A project to develop a base design that uses gstreamer to take VGA video (640x480) in RGB 24bit format from a video capture device. Have an Encoder block that multiplies R-component by 2, G-component by 4 and B-component by 8. Have a Decoder block that divides R-component by 2, G-component by 4 and B-component by 8. Display Decoded video on screen in real-time. Full development instruction should be documented. Full source code and documentation should be supplied. Please respond with your quotation and I will review and respond as soon as possible. I have listed the project budget as simple (€30-€250) as I am required to include a budget, there is a possibility to be flexible if required. Thank you

Hi, we need to modify gst-omx decode plugin and write new plugin that is based on eglglessink (found in gst-plugins-bad). Now, gst-omx decodes and copies frames to memory after which eglglessink copies frames back to GPU. Desired goal is to make sink that shares eglimage with gst-omx decoder so that frames are zero-copy. New sink plugin should render to OpenGL texture (sample program will be made - for demo purpose). I will supply you will all hardware and information needed.

You need to modify Gstreamer gst-omx plugin for gst-1.0 and make proof of concept program in opengl which renders video. You will need to modify plugin decoders to use eglimage and make sink plugin which uses that texture, so it is zero-copy. Proof of concept is for my reference, so I know how I can implement that code to my program. It should set plugin property "texture" to elgimage it makes to achive zero-copy decoding and rendering. Of course, I'm doing it for ARM which has openmax IL and drivers installed and working.

Project is described in detail in the following Google Document; Project includes the following; Step 1 ---------- This work will split the speaker detect module developed in Phase 1 into two modules; * Standard GStreamer FaceDetect * Speaker Select - Selection and then tracking of an individual speaker. --->> This step should include comprehensive tests. <<---- Step 2 ---------- Camera Control - Takes input from speaker tracking module and outputs commands to actually make the camera * Include support for Panasonic HE100 series camera * Include support for VISCA series camera Step 3 ---------- Integrate system into gst-switch There should be support for; * Selecting the

I need to configure a server for streaming logitech c920 mjpeg/mp4 hardware stream. NO TRANSCODING. I want to have a fast streaming with less latency as possible. The solution must be implemented on a linux server (ubuntu server), idealy on a raspberry pi with no GUI os if suitable. gstreamer, ffmpeg, vlc and other open source solutions would be prefered. The stream will be read on web browser and android/ios client apps.

I need a simple iPhone/...for building a singleton * (PossessionStore *) defaultStore; - [void] removePossession:(Possession *)p; - (NsArray *)allPossessions; - (* Possession *) createPossession; - (void) movePossessionAtIndex:(int)from toIndex:{int} to; #end Note: I explicitly need a WiFi solution which can also support/fallback to Bluetooth. GameKit can be used as long as no logging in is necessary. gstreamer or ffmeg also possible. If there are some restrictions about data size with bluetooth, try to transfer it with several packets and/or pack the audio stream data (but only on users approval). Be creative :) To the quiz: There are not only syntactical errors, but also semantic ones influencing the syntactical layer :) The lucky winner will have noticed t...

...images on canvas, List of lines/rectangeles/ellipses, List of strokes of pen. - I should be able to get a color of a pixel on canvas. I will need these data in next phases All codes must be open source and free for all purposes of use including academic, commerical, individual use etc. I will share original xml file and json with you for tests I know there are free media viewers like gstreamer etc.. So it would not be so difficult for a junior/senior gtk programmer...

change user-agent of the http header that gstreamer sends to remote server and re compile for enigma2 satellite receiver (mips cpu)

We are using a Gumstix Overo computer on module with embedded linux for a wireless video streaming project we are working on. Our goal is to send and receive a real-time video feed from a camera connected to the 27 pin camera connector on the gumstix, to a remote desktop on the same wifi network. We are planning to use Gstreamer as there is a Texas Instruments plugin for gstreamer that allows us to use the DSP on the Gumstix module to compress the video. We don't have a lot of experience with Embedded linux and we could use some of your consulting help to get us moving along with the project faster.

...module in gstreamer () into a robust speaker tracking module. The facedetect module currently detects faces and emits the position of each face on the gstreamer bus. This project is part of a larger project to create an automated video recording system, with the eventual goal of getting every talk at a User Group (such as Linux, Python, etc) recorded and live streamed without needing people with the knowledge how. Further work may be offered after completion of this project. The project will production of the following; * Forking and renaming the "facedetect" module into a "speakertrack" module. * Adding "detection" and "locked" modes to the module. More details about these modes and how the transitions work can be found i...

We have an HD video encoding project in which we need to modify some standard script to make our embedded system work properly. Moderate to advanced Gstreamer knowledge is required.

The aim of this project is to extend the OpenCV "facedetect" module in gstreamer (<>) into a robust speaker tracking module. The facedetect module currently detects faces and emits the position of each face on the gstreamer bus. The project will production of the following; * Forking and renaming the "facedetect" module into a "speakertrack" module. * Adding "detection" and "locked" modes to the module. More details about these modes and how the transitions work can be found in the details section. * Creation of a small gstreamer based program which utilities the module and shows the current mode and position of the "active person" overlay on the input.

On the image SIFTeam enigma2 extreme edition for DM. There's a binary named gst-launch that is used to play streamed video that uses a plugin named playbin2.. This plugin has the ability to show a subtitle track, but it is not automatic, there's a flag that needs to be turned ON and it has to be turned on manually... What we need, is that gst-launch/playbin2 plugin do this in automatic for the first track, so we need someone to modify this (We even have a tutorial to do so).. We need this to be compiled for Dreambox 800 processor.. The deliver can be a single binary so we can freely include it just by copying it (preferred) Or it can be a DM800 SIFTeam enigma2 extreme edition image..

We are currently running Fedora Core 17 with gstreamer plugins: good, bad, ugly and the associated extras pages installed. We need a pipeline that will produce AUDIO & VIDEO output via Black Magic's Decklink SDI output using the decklinksink plugin. However, we have success outputting only video via decklinksink and we need audio too. In the event that the existing decklinksink does not work, we would need a plugin for gstreamer that will. The sources for gstreamer and decklinksink are all available from

# Extend "facedetect" module in gstreamer into full speaker tracking system. The aim of this project is to extend the OpenCV "facedetect" module in gstreamer (<>) into a robust speaker tracking module. The facedetect module currently detects faces and emits the position of each face on the gstreamer bus. The project will production of the following; * Forking and renaming the "facedetect" module into a "speakertrack" module. * Adding "detection" and "locked" modes to the module. More details about these modes and how the transitions work can be found in the details section. * Creation of a small gstreamer based program which utilities the module and shows

# Extend "facedetect" module in gstreamer into full speaker tracking system. The aim of this project is to extend the OpenCV "facedetect" module in gstreamer (<>) into a robust speaker tracking module. The facedetect module currently detects faces and emits the position of each face on the gstreamer bus. The project will production of the following; * Forking and renaming the "facedetect" module into a "speakertrack" module. * Adding "detection" and "locked" modes to the module. More details about these modes and how the transitions work can be found in the details section. * Creation of a small gstreamer based program which utilities the module and shows

I follow this tutorial to create the kernel and filesystem with gstreamer and I got everything compile and running on the board, with expection of gstreamer, and the camera does not display when I use the command v4l2-ctl --all but it does display when the kernel loads up. the project help me figure out this problem to get gstreamer working with the camera. in the attachment you can see the logs.

I follow this tutorial to create the kernel and filesystem with gstreamer and I got everything compile and running on the board, with expection of gstreamer, and the camera does not display when I use the command v4l2-ctl --all but it does display when the kernel loads up. the project help me figure out this problem to get gstreamer working with the camera. in the attachment you can see the logs.

# Extend "facedetect" module in gstreamer into full speaker tracking system. The aim of this project is to extend the OpenCV "facedetect" module in gstreamer (<>) into a robust speaker tracking module. The facedetect module currently detects faces and emits the position of each face on the gstreamer bus. The project will production of the following; * Forking and renaming the "facedetect" module into a "speakertrack" module. * Adding "detection" and "locked" modes to the module. More details about these modes and how the transitions work can be found in the details section. * Creation of a small gstreamer based program which utilities the module and shows

# Speaker tracking using OpenCV and Gstreamer The aim of this project is to create a gstreamer module which will use a Pan, Tilt and Zoom camera to track a person around a stage. The aim is to allow a presentation recording system to operate without needing a person controlling the camera. **When putting in an bid please include links to any previous C or Python code you have produced.** Experience with gstreamer or OpenCV is not required but **highly desirable**. The module will have two modes; * In "detection mode" waving with your hands at the camera should cause the camera to transition into "locked mode" with the person who was waving their hands as the "active person". * In "locked mode" the camera will follow the...

Using gstreamer and VLC, I require an android application that can render a stream that is pushed over a local wifi network. The stream could use any of the popular protocols such as rtmp, rtp, rtcp & rtsp. The application needs to be designed based on the mockups that I shall provide. The deliverable will be the completed application along with the source.

Using gstreamer and VLC, I require an android application that can render a stream that is pushed over a local wifi network. The stream could use any of the popular protocols such as rtmp, rtp, rtcp & rtsp. The application needs to be designed based on the mockups that I shall provide. The deliverable will be the completed application along with the source.

We are using the gst-rtsp-server in gstreamer to stream content over rtsp. We are doing live transcoding i.e. transcoding a stream that we are pulling from a http link, onthe fly and then streaming it over rtsp. Seek is not working correctly with gst-rtsp-server. We need help in modifying gst-rtsp-server so that seeking works correctly and then we'll integrate that into our code. This could be a matter of fixing a bug in gst-rtsp-server or maybe even guiding us towards the right libraries where this bug has already been fixed. Thanks, Rohit

Hi All, I am having a product where in we are using gstreamer to stream our multimedia content which i am able to do successfully. Although i am able to play the stream on my VLC/real media player but whenever i try to seek the video the player either crashes or the stream stops there abruptly. Please bid if you have good exposure to rtsp streaming and gstreamer. Thanks

Hi, I'm looking for developer to continue in our rails application for IP set-top-boxes as IPTV platform. Basically we need some other application like news that has to be reformatted for IP STBs etc. Length of the...application for IP set-top-boxes as IPTV platform. Basically we need some other application like news that has to be reformatted for IP STBs etc. Length of the project: 6 months Required skills: - rails (including cucumber and rspec frameworks) - C language to hack opensource C projects - linux (you should know IPC principals, some unix C API) - git - best would be to know gtk++, cairo, gstreamer, clutter etc. (or ability to learn them quickly - I can help with them) Please send me also PM with our skills and why I should choose your offer. Than...

To create a custom RTSP server over gstreamer. This server would be able to a) handle multiple simultaneous connections 15-30 simultaneous connections b) transcode a media file on the fly while transmitting the file as it's being trancoded over RTSP Thanks, Rohit +91 9811115987

Hi, I have a program based on openGL written in C. Platform is Linux, i686 and hardware is exactly defined. I need a video player in it, and I intend to make it with Gstreamer. Video will be displayed on openGL texture provided by my program. Audio will be played as simple as possible, probably with alsasink or similar with ability to choose which one to play if there are various options. There are two types of video that will be played: A) HD video - Using gstreamer-vaapi plugin and modifying vaapisink element to use our texture for displaying (not to create texture and window) B) RTP or UDP (you can choose) streams (MPEG2 TS) - Making pipeline that will be able to display streams property and start them fast enough. - If stream is HD it will be decoded ...

Hi, I have a program based on openGL written in Java. Platform is Linux, i686 and hardware is exactly defined. I need a video player in it, and I intend to make it with Gstreamer. Video will be displayed on openGL texture provided by my program so you have to figure out how to connect Gstreamer with it. Audio will be played as simple as possible, probably with alsasink or similar with ability to choose which one to play if there are various options. There are two types of video that will be played: A) HD video - Using gstreamer-vaapi plugin and modifying vaapisink element to use our texture for displaying (not to create texture and window) B) RTP streams (MPEG2 TS) - Making pipeline that will be able to display streams property and sta...

Por favor, regístrate o inicia sesión para ver los detalles.

I have gstreamer pipeline to broadcast a video stream, for now I use the same machine, I am interested in measuring time coding, loss, decoding time, it is a simple project, bid if You have experience on GStreamer platform 40$

Por favor, regístrate o inicia sesión para ver los detalles.

Looking for hourly contractor to work on audio dsp project. You must have strong experience with TI Code Composer and access to ARM/DSP c67xx dev board.

Hi, This project is for freelancers with Texas Instruments hardware (ARM+DSP) such as Beagleboard or Pandaboard. You will be programming an audio element for GStreamer and using C6Runlib to compile the code library that will run on the DSP. You job is to 1). write a GStreamer audio element with a sink pad to accept up to 8 raw audio channels (up to 32-bit, 192khz per channel). 2). buffer those (upto) 8 channels into the DSP and return them back to the element. Each channel should have its own DSP processing thread. 3). each channel should be buffered/returned back to the GStreamer element unchanged. 4). each channel should have its own output source pad in the element. See this diagram for clarification.

I need a simple video recorder program to record Video and audio on Linux devices. The program will record Video from an installed V4L2 device and audio from ALSA devices. The output file will be a H.264 encoded .MOV or .AVI The recorder should record in small files of one ...will produce a list of files such as "2010-01-01 " "2010-01-01 " "2010-01-01 " etc. It is very important that there is no gap between the end of one file and the start of the next. When disk space runs low the DVR must delete the oldest files to make room for the newer one. Please see the attachment for details specs. Using Gstreamer or libavcodec etc to create this program is recommended but I'm open to alternatives. Bring your suggestions.

Hi, Your job will to design an 8 channel audiosink for GStreamer. Accepting the following audio input type. audio/x-raw-int endianness=(int)1234 signed=(boolean)true width=(int){ 8, 16, 24, 32 } depth=(int)[ 4, 32 ] rate=(int)[ 1, 192000 ] channels=(int)[ 1, 8 ] The sink will output data to Texas Instruments Davinci DSP McASP. The final output will be i2s or DIT. The sink will provide a hardware audio clock. See here for a block diagram. Applicants must have access to a recent TI Davinci EVM with McASP. Thanks for looking.

Hi, We would like you to create a 8ch audio sink for Gstreamer that interfaces directly with TI Davinci DSP McASP units to transmit i2s audio. Can you help?

Hi Please bid on this project if you have some experience in creating gstreamer plugins. The idea is to create a mpegtsmux plugin for gstreamer using the code available at: git clone git:// you can download the code from git. It is a mpegts muxer which allows mpeg2 compression for dvb-compliant streams. This code needs to be ported to gstreamer as a new plugin. The current mpegtsmux provided by gstreamer does not have the ability to provide dvb-compliant mpegts streams. *Please dont provide generic bids be specific to the project and ask questions.