Microcontrollertrabajos

Por favor, regístrate o inicia sesión para ver los detalles.

Solve Digital programs using ATMEGA48 Microcontroller. Urgent. Needs to be done now.

Overview of the project A gyroscope structure will be constructed, and the quadcopter will be placed into the structure permitting it to rotate about all three axes. This wil...into the structure permitting it to rotate about all three axes. This will make it possible to observe all possible angles and regulate quadcopter’s three dimensional position. The structure will have its own sensors at the frame joints for measuring yaw, pitch and roll angles independently so that quadcopters without built-in sensors can be tested too. Sensor data will be transmitted to a microcontroller that will control the attitude of the quadcopter. Division of Tasks: Design and construction of gyroscope mechanism,( we made it ) Sensors and electronics, Quadcopter integration, communicatio...

We want someone that could delivery using the NO-OS driver from AD () a application using C that fully communicates with AD7190 (all configurations and weighting setup) . T...delivery using the NO-OS driver from AD () a application using C that fully communicates with AD7190 (all configurations and weighting setup) . This application should use a task from FreeRTOS and communicate using a Queue (that other tasks could use it). It should be writen in C on Atmel Studio for the ATSAM4E16E microcontroller. We don't want hobbyists, only personals who could handle the tempo and delivery a quality code for reusage. More details in private.

Develop a battery-operated wireless transmitter module capable of sending the following data: Two dry contact inputs N.F. Two sensor temperatures PT-100 In addition to remote sending, the system should display locally on a low-power LCD display, such as nokia temperatures measured.

Hello, The project is to build a quick Simulink model to protot...Microchip addon for Simulink. It is a development tool to quickly program a DSPIC microcontroller. The DSPIC selected is the 33FJ128MC802, fully compatible with the above tool. The firmware includes: _ A PWM signal _ A fuzzy logic controller _ A temperature sensor _ A voltage sensor _ A capa sensor (for UI) / Or tactile switch The project is fast track. The hardware is ready to use. Schematics and existing simulink model will be shared to selected freelancer. Architecture and block diagram also to be provided. Please advise if you have used this tool or skilled at using SImulink. Or used Simulink to program a microcontroller.

Ciao Asad257, prima di tutto ho messo un importo solo indicativo, anche se non ho un grosso budget. Senza perdere tempo ti dico subito di cosa ho bisogno; qualche mese fa ho fatto fare un PCB, sono passati molti mesi dall'arrivo di questo pcb per mie motivi, trasloco ecc ecc ho dovuto fermare il tutto, chi me lo aveva fatto è sparito quindi mi trovo con un pcb con microcontroller e non riesco a programmare. il PCB funziona con ST Nucleo STM32F446, racchiude vari sensori tra cui: nr 8 uscite relè nr 5 uscite sensori di prossimità nr 3 sonde temperature ntc nr 1 sonda temperatura sonda k nr 3 led nr 3 motori DC nr 1 lettura analogica consumo di un motore nr 1 letture di flusso acqua (legge gli impulsi di una turbina) nr 1 modulo per load cell nr 1 modulo cal...

...be used is a 3.7v 3000 mAh rechargeable lithium battery. Information about the battery can be found here () - What I expect to get from this job: - Full schematics, with PCB layout and Gerber files. - All codes used in microcontroller and the apps. - Names of every components I need to prototype this on my own. - Some explanation and documentation on how the microcontroller and apps have been coded for further development. ...

I am attempting to locate someone who can modify/hack a brushless gimbal controller (Storm32 BGC), ultimately, to simply move a brushless gimbal motor, back and forth, from a WiFi, or Bluetooth enabled device, preferably, a smartphone. The controller uses Ti's DRV8313 and an STM32F103RCT6 microcontroller. I'm also open to suggestions for alternatives to the above- this project is for an experimental camera slider. I am even open to designing a custom solution. Speed must be easily adjustable, and there must be a way to determine when it's reached the end of it's track- end stops, or similar. Thanks!

HI, I want a C code using the parallel port to build a keypad/LCD user interface for a microcontroller with the diagram. Contact me for more info.

Writing a sketch for Arduino and Wiring Schematic! The sketch must run on a Adafruit ProTrinket 5v. - - The sketch must be written for the Arduino IDE Software. The microcontroller has one push button and one servo (you will specify which GPIO pins to use). The microcontroller uses 5v input. Functions: 1. When the button is pushed and released, the servo will move from 0 to 160 degrees and return to 0. 2. When button is pushed and held for 3 seconds, the servo will move from 0 to 160 degrees OR from 160 to 0 degrees depending on if the servo is at 0 or 160 degrees.

Technical writing. The document about wireless communication using microcontroller it will discuss using two Raspberry Pi3 devices to send and receive massages also these messages are encrypted and decrypted for the security issues. Half of the document has been covered which is the literature section. Know all I need is the technical section. The code already been written also. It must cover the following: Implementation process and testing Discussion the result

We are an IoT hardware development company located in Denmark and are looking to hire a software programmer for continues projects. We are working with red bear microcontrollers and hence you must be able to write in Python and C++ and preferable also have a microcontroller to test on locally. We are uploading and analyzing data using Microsoft Azure. You do not need to be skilled in Azure, but if you are able to test if uploads are correct it is also a plus. If you have experience in Bluetooth mesh/PAN networks it is a plus. If you can tick off all of these you are perfect for this task: - Skilled python and C++ programmer - know to Azure - Bluetooth mesh/PAN - iBeacons - hardware power consumption optimization Currently we are working on

We are looking for a electrical engineer and a computer engineer to develop a C implementation , pcb design and micro-controller programming for our IOT product. Must be a qualified electrical or computer engineer with sound knowledge of microcontroller architectures , programming and embedded design.

HI, I want a C code using the parallel port to build a keypad/LCD user interface for a microcontroller with the diagram. Contact me for more info.

...node to the base module. The base module will send the data to our distant server using TCP/IP using a Wifi connection. The node transmitter circuit that is running on batteries has these blocks: - PIC16F1513 Microcontroller - Wireless Transmitter module RFM95W 868 MHz (using SPI communication) - 2 x Temperature ds18b20 sensors (using 1-wire communication) - Battery level monitoring - Water leakage detector : ON / OFF PIC pin detection - 1 x LED and 1 button The base receiver circuit that is running on electricity has these blocks: - PIC16F1513 Microcontroller - Wireless Receiver module RFM95W 868 MHz (using SPI communication) - 1 x LED and 1 button - ESP12-E module (ESP8266 Wifi Module) (using uart and SPI communication) We will send you a fir...

I need PCB design for a given schematics. SMD components are to be used. Please see the attached files for schematics, required PCB dimensions etc. In the drawings, The SMD components will be mounted on the top side of the PCB. The 1x4 Pins PTH 2.54mm Pitch Female Header and PRIME 126-2 PCB T...SMD components will be mounted on the top side of the PCB. The 1x4 Pins PTH 2.54mm Pitch Female Header and PRIME 126-2 PCB Terminal Block will be mounted from the bottom of PCB. Please study the schematics. I have not optimized the capacitor values for the circuit. Let me know if any changes is suggested. If the same circuit can be designed using alternative low cost microcontroller, it will be better. The new microcontroller should have UART Tx/Rx pins. I require all files needed fo...

I need you to develop some software for me. I would like this software to be developed for Windows using C or C++. Currently working with an MSP430 Microcontroller coding in C sing CodeComposerStudio. I need to create a program using interrupts that will set different speeds to 2 motors. I have 2 servo motors and 4 external bush buttons wired. I need each push button to have a different speed setting. This uses PWM.

Need a C Lib to enable PIC 18F microcontroller to communicate with Microsoft AZURE IOT Hub using MQTT protocol

Hi Everyone, I'm looking someone who can design a digital PID controller for buck converter and regulate the output voltage when load is suddenly change. ( based on microcontroller) Since, we can derive the transfer function of buck converter Vo(s)/d(s) and observed the filter gain. I have studied some basic analog PID controller design and the equation can be: [ Vo(s)/d(s) * Gc(s)/1+ Vo(s)/d(s) * Gc(s) ]. Based on this equation we able to substitute the P, I and D to simulate step response, gain margin, phase margin to ensure sure the stability. ( <--- However, this is an analog PID concept) I have read some book and design example of PID tutorial , the useful design material will be shared with you during the discussion. The following task need to be done: ...

Design to prototype test of a secure live streaming device (video, audio and image) with local data storage capability. Microcontroller based. Potentially small enough to be a wearable device.

3 mini projects: I2c Master Slave USB ADC all of them should be done using PIC18F4550 , XC8 compiler , pickit 3 and C language

Project Description Need this in 1 day This is the board that must be used Dragon12-Light-USB Trainer For Freescale HCS12 microcontroller family 12 hour Digital clock in assembly language for this microcontroller board. Use the LCD to display the time that must include seconds, minutes, hours and a.m/p.m. Dragon12-Light Board DVB-023DB.

Need this in 1 day This is the board that must be used Dragon12-Plus-USB Trainer For Freescale HCS12 microcontroller family Digital clock Use the lights to display the time in binary or some encoded fashion OR use the LCD to display the time You have the option to: Choose a Pre-Selected Project from the Sample Project list in the Course Information section. Choose your own project to be completed using Dragon12-Light Board DVB-023DB.

Need this in 1 day This is the board that must be used Dragon12-Plus-USB Trainer For Freescale HCS12 microcontroller family Digital clock Use the lights to display the time in binary or some encoded fashion OR use the LCD to display the time You have the option to: Choose a Pre-Selected Project from the Sample Project list in the Course Information section. Choose your own project to be completed using Dragon12-Light Board DVB-023DB.

We need a freelancer with skills in embedded systems amd microcontroller's programming for a very short time work.

We need a freelancer with skills in embedded systems amd microcontroller's programming for a very short time work.

Design to prototype test of a secure live streaming device (video, audio and image) with local data storage capability. Microcontroller based. Potentially small enough to be a wearable device.

We are building a tracking device that sets off an alarm when the user is a certain distance away from the transmitter. Mbed code utilizing 2 KL25Z microcon...Ultimate GPS Breakout v3, and two BLE HC-05 Low Energy Bluetooths. The device will prevent people from losing their valuable items. When the receiver is at a certain distance away from the transmitter, a buzzer will go off alerting the person that they have left something behind. The transmitter will consist of one XBee, a BLE HC-05 Low Energy and a KL25Z microcontroller. The receiver will consist of one XBee, a KL25z microcontroller, an Adafruit Ultimate GPS Breakout v3, and BLE HC-05 Low Energy. We need the receiver XBee to take the GPS current location data and send it to the transmitter XBee and convert it to a ...

Need this in 1 day This is the board that must be used Dragon12-Plus-USB Trainer For Freescale HCS12 microcontroller family Digital clock Use the lights to display the time in binary or some encoded fashion OR use the LCD to display the time You have the option to: Choose a Pre-Selected Project from the Sample Project list in the Course Information section. Choose your own project to be completed using Dragon12-Light Board DVB-023DB.

I need a hardware to be designed in any schematic tool with already selected components to meet the purpose. The details will be shared one to one over chat. Need knowledge of ADC, Microcontrollers, Filters (sallen key filters), Crsytals, Clocking Very important: Must understand detailed datasheet. Work will be confirmed after checking understanding of datasheet. * PCB design not required at this stage, will be a separate project. * Schematic design must be supported by simulations (Spice)

I want to generate a waveform on an output on MPLAB. message me and I will provide you all the details

We need to design a circuit that will monitor and log the temperature of a place and send it to server, the circuit will also need to determine its current position and send it to server too. The connection to server will be done through GSM module. We need to use an Atmel microcontroller, a DS18B20 temperature sensor and GSM module.

Read the ADC using Potentiometer that show its values on a 7 segment display and read it in the laptop using the USB this work should be done using : 1 C language 2 Mplab X IDE 3 C8 compiler 4 PIC18F4550 5 Breadboard 6 Pickit3

Programm a microcontroller. 4 buttons, 1 to turn on the display with interrupt. 1 to turn the display off into the interrupt. The other 2 are going to write a text on the display. Also a printable layout is to design.

Arduino application support

1. Key Activities: Connect multiple web cameras to multiple OLED displays to view live stream video feed on the displays. Camera output signal is either HDMI Class 1.0 (720P-30) and/or USB UVC standard 1.1. Not sure what protocol the displays use. Deliverables requested: • Prototype drawings and/or de...standard 1.1. Not sure what protocol the displays use. Deliverables requested: • Prototype drawings and/or design schematics for Printed Circuit Board including PCB layout according to mechanical constraints (form factor) as detailed by me. • Sourcing of components: chipset identification and BOM, create netlist • Possibly?? embedded software engineering code for microcontroller programming to setup the chips' internal ...

Looking for someone to write an iphone (eventually porting to android as well) app that can do the following: Securely connect to a device we make using a PIC32 microcontroller. Connection to be made either directly through bluetooth to the PIC32 device, directly through wifi to the PIC32 device, or through a wireless network using a configurable IP address. Communicate to and from the PIC32 device using a predefined list of ethernet commands. Interact with the user to turn on or off I/O using a graphical interface. Turn on or off graphical representation of I/O within the app. Save configuration files to a csv, text, or excel file on the mobile device.

to design, test and develop an automated system that will measure the force of an object by placing a force sensor (FSR SENSOR) on prosthetic fingertip. the aim for it, is to apply pressure on to the object and convert the pressure into force using a programmed microcontroller. the force should be displaced on LCD board , also the output should go to an actuator (solenoid) which should apply the same force as was measured. also a report writing of all the data/program used/test basically a good report on every step taken through out the report. thank you

Need someone to write C code associated with picKit 3 and PIC18F4550 Microcontroller that can read ADC and show the results on 7 segment LED display more details will be given in private the deadline is two days only

We need th...alarm to a cellphone when find an alarm. We have an UPS connected with serial port to an modem, we need develop the software for this microcontroller. We have the UPS protocol , so the design consist in read the flags from the UPS via RS232 and if something wrong happend on the UPS the modem send the SMS to a cellphone. The microcontroller neeed to keep the cellphone number where need to send the SMS and also it can receive via SMS new cellphone numbers or erase other from the list. All project that we need is related with hardware becuase we already have the hardware. You can develop the project in C witht he microcontroller that you prefer. The microcontroller need to keep the number and male some basic functions like send the actual status or res...

Project to design a piece of equipment which can run through our production process, and record some conditions. The system will consist of a microcontroller, 2 pressure transducers, and a humidity/temperature sensor. It will be measuring conditions from inside a dryer at ~ 110 degrees. The code needs to make it simple for the data from these sensors to be recorded onto a storage device (usb/sd card) which can then easily be uploaded onto a PC and transferred into an Excel sheet. The project is expected to be completed within the next 3 months or so, and over that time the code may need adjusting in order to make the equipment a reliable piece of kit.

I need to chill a tank of water about 12 litres to a specific temperature in the fastest amount of time, and I will also need to stir the water in the tank and dispense the water out. You will need to design the components and give me the spec...components and where to buy online. If you are able to build it, please indicate that. You will also be designing the pcb in EAGLE and send it to me. I like to use Arduino as the micro-controller. The size of the system should be kept to a minimal, and for any components that will be in contact with the water they should be food-safe. You need to have professional knowledge on peltier cooling, microcontroller (arduino), robotics (pumps, motors, etc..), pcb and circuit design. If will be good if you have industrial design knowledge. ...

This project aims in designing a system which makes 230V AC lamp diming through Android smartphone possible. The lamp diming is done wirelessly through Bluetooth feature on smartphone. Microcontroller based system will be used as the dimmer controller. The project main components are the Bluetooth module that will act as a medium for connection between smartphone and light bulb. The smart phone will control the diming of the light bulb wirelessly. This happened by the communication of microcontroller based system with the Bluetooth function on smartphone. The Bluetooth module act as optical isolator with the AC part of the system, it is an open standard specification for RF based short-range connectivity for wireless communication. The operating system use by mobile devices ...

I need help to fix/implement the wakeup function used in the ASF library to our Arduino library. Any experience with the Atmel ASF and SAM Microcontroller would is necessary. I think it´s not a big business but some knowledge in this field is necessary. Please contact me for further details.

...Controller) is intended to control the voltage of an induction/permanent magnet generator of a stand- alone micro hydro power generation. The generator voltage variation is in inverse proportion to the loading condition where ELC maintains constant loading of generator for continuous output power mode. The IGBT based DC chopping method is used for diverting excess power to the dump load using microcontroller for voltage sensing & control signal generation. The sensed voltage variation, is the reference to PWM signal generation, for the gate control of IGBT. Please refer to the attached PDF file. It contains a brief description regarding the working of an ELC. It also has a circuit diagram for an atmega328p based ELC along with its code. You may also refer to this link http:/...

...Controller) is intended to control the voltage of an induction/permanent magnet generator of a stand- alone micro hydro power generation. The generator voltage variation is in inverse proportion to the loading condition where ELC maintains constant loading of generator for continuous output power mode. The IGBT based DC chopping method is used for diverting excess power to the dump load using microcontroller for voltage sensing & control signal generation. The sensed voltage variation, is the reference to PWM signal generation, for the gate control of IGBT. Please refer to the attached PDF file. It contains a brief description regarding the working of an ELC. It also has a circuit diagram for an atmega328p based ELC along with its code. You may also refer to this link http:/...

GSM based on off -- circuit and PCB layout design (PCB layout ready for fabrication (Gerber file). --Component 1) SIM800L (specified pins are keep accessible to microcontroller and user.) 2)ATMEGA328P SMD version (pro mini open source architecture with 8MHz and 3.3 V) 3) Voltage conflict management with lipo charging (power path management) (using this kind of IC MP2617) 4) Single phasing, reverse phasing, Unbalanced supply, Auto reset in such condition.( Reference circuit available) 5)two channel relay board and remaining I/O ports are kept outside with protection 6) Power supply(SMPS) for it (85-440V sustainable ) Block diagram and some specific requirement are discussed at finalising stage Compleat payment released after the project is successfully tested.

Upgrade/Modify an existing oem car multimedia ISO image for ability playing video files. Car multimedia system is oem from Ssang Jong Tivoli plays only music files and i want it to play movies too - it seems to be blocked by default. Firmware is based on a V850 microcontroller with touch screen display. A full working ISO image is present. Need someone can analyze and modify the files to make it able to playback video files. For more details download the iso file at http://zambakotomotiv.com/ so you an analyze it and see if you are familar with this. You also can contact me [Removed for encouraging offsite communication which is against our Terms and Conditions.]