Virtualizortrabajos

Hi I need you to create a vm on virtualizor with windows 11 on it and able to connect through rdp

We need to configure VLAN connection for Virtualizor KVM on Ubuntu20 (with netplan). VLAN should be managed by Mikrotik RouterOS with some Firewall (rules for Guest VPSes from Virtualizor). Suggested access through TeamViewer with necessary Winbox, SSH and Virtualizor web seccions.

Add proxmox nodes to virtualizor then make sure everything Works Add vps plans and provisioning vps.

Configuring the new Debian System for WHMCS: 1- Email Server (Done) 2- Web Server (Done) 3- Maria DB (Done) 4- Wordpres (Done) 5- WHMCS (Done) 6- Connecting to Virtualizor (Done) 7- Adding RazorPayment (Done) 8- Adding FTP Server (Done) 9- PHPMyAdmin (Done) 10- Designing and fixing few things (Loading yet..)

I am looking freelancer, who maintains servers and virtualizor panel knowledge, i have servers but no idea to create vps and sync with virtualizor panel, so i need support for each servers.

I Need To Setup Virtualizor On A Server To Manage My Hosting Company And Spin Up VPS On The Fly

We need to create a Windows 10 templates for Virtualizor, for automatic deploy of that OS. For that reason I need the img file for windows 10 with following characteristics: 1) Updated 2) Activated 3) As light as possible (removing unnecesary things, like cortana...) 4) With RDP activated 5) That virtualizor can setup the password 6) Windows update disabled 7) Template size must be reduced as maximum (around 10 gb), and ready that virtualizor can extend the disk when install in bigger disks 8) Installation of google chrome We need the result in img file, supported from virtualizor.

is accesible from Internet but not accesible from Network: Mirotik -> Hyper-V: --> VPS 1.1. pfSense --> VPS 1.2 CentOS Web Panel with (through Cloudflare) adn --> VPS 2.1. Ubuntu20 Virtualizor -> VPS 2.2. Ubuntu20

Need help of a experienced network admin with knowledge in setting up vLan networking on a server.

Hello, GRE tunnel from an DDoS protected Hungary VPS on my dedicated where virtualizor is installed. In essence, I would like to use my Hungarian IP address on the German server due to ddos protection. (Automating all this) It would be important for me to 2 sh scripts (1 Germany unprotected, 2 Hungary protected) that just need to be run and everything is perfect at once. I want vps servers created on a German server machine to record remote DDoS protected ip addresses through a GRE tunnel. Germany server: Centos 7.9 + Virtualizor VPS Control panel Hungary server: Centos 7.9 Thank you

We have used virtualizor to virtualize our server on centOs OS. Today it suddenly went down. We have rescue mode access and KVM console access but it is not booting in normal mode. Need experienced system admin to fix this as soon as possible!

Configure an external server in VIRTUALIZOR with SAMBA and create automatic backups

Hello, I have a very big problem with a virtual machine in VIRTUALIZOR (KVM) - It is a production device. I tried to edit the disk size from 2TB to 3TB. However it didn't work. Then they explained to me that for this I had to perform an additional disk conversion action. Due to ignorance I DID NOT DO IT, but now my VM does not allow me to connect even though the VIRTUALIZOR control panel shows that it is running. I think that editing the size from 2TB to 3TB was a mistake, but now I can't go back to the previous size and the worst thing is that I can't enable my VM. It's an emergency, can someone help me?

I am using virtualizor for KVM management and I need DRBD and Heartbeat setup for failover.

Hello, we need virtualizor api mobile app for iOS. Application need have: Login, show all vps, control(star,stop,restart,vnc),editing. This is app only for administrator not for public. API: Thanks

we have one virtualizor server (ubuntu server with KVM ) and 2 virtual machine that must create 4 vlan interface on virtual machines and host server (vlans defined on cisco nexus) . the vlans has been created on host server and worked correctly but we can't do use vlans on virtual machines . notes : we don't use bridge interface and must direct passtghrough vlans on machines. all virtual machines are used ubuntu server 20 we don't have problem with vlan network between host server and nexus. I need to have two virtual servers and create the vlan vlan interfaces on them . we want to create a virtual nic from your bond interface and want to tag on your virtual machine with separate vlan this problem is linux (sorry for english)

Searching for an experienced Hosting and VPS Expert, with vast hands on, operation, management and trouble shooting experience for hosting and VPS service. Must have extensive knowledge in Virtualizor, WHMCS, Cpanel, DNS, Cloud Linux and API integration

We are looking for experienced System Administrator to configure Ceph storage on Virtualizor KVM.

*** DO NOT BID IF YOU HAVE NO EXPERIENCE IN THIS AREA!! *** I have 4 OVH dedicated servers and a Virtualzor Master server, I require IPv6 /64 blocks to be added to my slave servers to allow me to deploy IPv6 based servers. I have had quotes for less than $50 to do this work, if you are going to try and quote ridiculous amounts, do not bother.

Searching for an experienced Hosting and VPS Expert, with vast hands on, operation, management and trouble shooting experience for hosting and VPS service. Must have extensive knowledge in Virtualizor, WHMCS, Cpanel, DNS, Cloud Linux and API integration

I've server ready with one single public IP. I need someone who can utilize this one public IP to use in multiple VPS server hosted on same server. What I've already is - A dedicated server - cPanel installed - virtualizor installed Important - Single public IP needs to be routed through internal IPs. Let me know what else is needed, I'll provide the same.

Hello, Hi, my own dedicated server with a virtualizor app for virtualization. My server CPU: 2 x AMD EPYC 7402 24-Core Processor 128 GB RAM 10Gbits Internet Port Speed. 500 SSD However, on the VPS, I have haproxy + 3proxy installed. But when I have like 1000 connections simultaneously, the port speed drops to 50-1000Mbit even, it has a +10Gbit connection speed. I don't really know what is missing from the setup. We are searching for experts to do this task our time is minimal. All bot's replay will be immediately ignored.

Goal: Allow users to seamlessly sign into our various management panels and services using 1 account on a unified login page. Why do we want SSO? We want to use SSO for our client accounts with the intent of ease of use for our users on the following services: - Billing Panel (WHMCS) - Game Panel (Pterodactyl Panel) - VPS Panel (Virtualizor) None of these apps natively support SSO authentication, so some modification would have to be made to allow them to support the SSO system. Project Details We want to create an SSO system that forces each of these services to be logged into via a unified login page. WHMCS should be the primary source of data, where the user can change their name, password, etc… It also has 2FA, so if the user could setup 2FA via the billing panel and ...

We are having some issues with our infrastruc...our infrastructure and could use assistance. We have a bit of a tricky setup utilizing both virtualizor and proxmox and the issue we are having is that changes made via virtualizor or whmcs (such as IP address changes, root password changes, etc..) are not applying to the virtual machines (KVM Qemu). Also, we a new VPS is created, the assigned IP and password are not being set either. Everything was previously working and after some minor updates, it is not working. We purchased this VPS Hosting company only a few months ago so I am not 100% sure of exactly how the previous owner set everything up. I do know that bridges are also being used. Need someone with lots of sys/net admin and virtualizor/proxmix experience to h...

i have already setted up virtualizor on a dedicated server from OVH now i need help to create a vps and add some storage from OVH to that VPS on Virtualizor that VPS on my virtualizor setup need to run Windows 10 thank you for your interest cheers!

i need someone to manage my actual setup I’m using VIRTUALIZOR / WHMCS / WORDPRESS Lagom whmcs theme, hostiko wordpress theme

Hi Lawrence, my name is Darren and i am the owner of Hostworld. We are a fast growing KVM VPS provider in the UK utilising Virtualizor as our panel. We have 1 Master server and 10 nodes with 6 being in London and the rest in the states. I run the business by myself but I am now looking to take on ideally an employee to manage the day to day tasks and provide support to customers (WHMCS).

Hello, I have an IPv6 range, and I want to bind the whole IPv6 range I have to all of the main server virtual machines (KVM). So all of the VMs should have access to the same IPv6 range I have. By the end of the day, all VMs will have access...need to give all VMs inside this main server access to the same IPv6 range I have. NOTE: 1- The solution should not affect the performance. We made a lot of traffic on this IPv6 range. 2- Currently, I have split the subnet into a smaller subnet and assign each VM the new split subnet I have created. The goal is to use the same full IPv6 range on all VMs (KVM) without any split. 3- I'm using Virtualizor for virtualization () 4- All the configuration should be done on the server side. I don't have direct access to the router.

Looking for technical support for VPS and Dedicated Server Hosting Project. Skills: - Esxi and Vcenter Basic - KVM virtualizor - Windows Server Basic - Linux Basic - Time: 8 Hours Per Day - Monthly Salary is 250$ - Payment is Weekly and just with Freelancer

Hello, I'm a new virtualizor user, and I need someone to guide me as a tutorial [Removed by Freelancer.com Admin for offsiting - please see Section 13 of our Terms and Conditions] Like: Add storage, IP POOLS, Make VPS, configure other things. The freelancer should know at least one of these languages: English, Arabic. All the best

Hello, I'm a new virtualizor user, and I need someone to guide me as a tutorial on zoon, skype, etc... Like: Add storage, IP POOLS, Make VPS, configure other things. The freelancer should know at least one of these languages: English, Arabic. All the best

Hello, I am having a few problems bridging my IPs from server provider onto my Virtualizor to create VPS's from my Dedicated server. I am receiving the following error when creating a VM - The viifbr0 is not started. Please run service virtnetwork start I have followed instructions from here - But am not getting no luck, still same error. Is only a 2 minute job for an experience linux administrator. I am running Ubuntu 20.04. If someone has experience, I want someone to fix for me and tell me what was wrong and what to do for when I add more IP's in the future. Happy to teamview.

probably a stupid setting im not getting, i am having issue with slaves server with VNC that do not waht to launch

We are looking for someone to develop a routed model for virtual machines in virtualizor. By default VM's in virtualizor are setup with a Layer 2 bridge. We need this to convert this to be a routed bridge. - When a VM is created the vm's ip is then announced via OSPF. - When a VM has more ip's added these will then also be announced via OSPF. - Every ip should be announced as a /32 - Built in virt-network funcationality should be disabled and not used. - Virtualizor supports code hooks that runs on vm creation / updates. We expect a ready solution to do this based on a virtualized master and a virtualizer slave. If required a virtualizor master and slave can be made available. We also need a method of converting legacy Layer 2 nodes over to Layer ...

Hello, I have some different problem with my booking function and need to get this fixed today. I also need to get fixed a redirect from old to new website. The website is on a VPS: Virtualizor More information will be given in chat. I need to get this done today, asap!

Hello, I have some different problem with my booking function and need to get this fixed today. I also need to get fixed a redirect from old to new website. The website is on a VPS: Virtualizor More information will be given in chat. I need to get this done today, asap!

I'm looking for someone to: - Add a IPv4 subnet as an IP pool to my virtualizor server - Create a IPv6 only IP pool I can use to make VM's without an ipv4 address Both main server and subnet are bought from Hetzner Access via SSH to root server is available

We are looking for someone with experience of Virtualizor, OVH and their IPv6 configuration

Hi! I need a new layout / theme for the Virtualizor panel. I already have a theme from themeforest. What you need to do is implement the theme I already have with the code from Virtualizor. We can discuss the price you get paid. You get alot more explanation before you start. Please contact me if you are able to do this.

Setup Cpannel, whmcs, Virtualizor Currently we are using direct admin, NextCloud, Exchange 2016. We host around 50 websites, 100 next cloud subscriptions, 200 exchange email accounts, We want to become a full blown Virtual Service Provider. We want our clients to be able to sign up to us from our website. buy the following services domains, hosting, ssl, virtual machines, dedicated machines, VPN, NextCloud, Exchange Mail Boxes. We want to be able to continue to keep adding more servers and grow, currently we host a number of websites and virtual machines for clients. So we need someone to setup everything we need to run a Virtual Private Service so our customers can buy, manage their solutions with minimal interaction from us. Also to do it as cheap as possible to keep co...

Hello, I am looking for someone to enable IPv6 connectivity on my KVM slave server and make sure it works inside the virtual machines. This includes setting up the configuration of the IPv6 subnet in the panel I use, Virtualizor. You will need to tell me the steps to make it work so that I can replicate it on one other server. Thank you for your bids. Regards.

Hello. I need help to install Virtualizor until ready create vps. Thanks

Install and Configure Virtualizor on OVH Dedicated Server

Hi, I just need a fully funcional virtualizor to allow VPS creation from my WHMCS. I can set up WHMCS for virtualizor, I just need you to have my server ready for that.

need help with my asterisk setup which we use FreePBX, and some help on my virtualizor and WHMCS setup

Please, I need help to add a new server as slave in my cloud virtualization managed with KVM and Virtualizor. I have root access.

...our network. We have our own IPV4 allocation we will be announcing, and we will be multi-homed with two IP transit providers as well as connecting to AWS and announcing some of our IP space there. We will want to implement a DNS server that can provide access to a number of virtual machines using internal IPs and taking advantage of NAT. We will need somebody to help manage the deployment of virtualizor on top of proxmox to set up KVM environments for our clients. We will also want you to configure the firewall settings and advise on network structure. We will have an auditor to provide assistance on network configuration, but if you are able to follow instructions and ask for help when needed we will need regular work. Experience in web hosting is an asset. Please provide any r...

Need help mounting, old disk into new one to recover info. Here is what happened, my server was centos 7 was running virtualizor KVM enviroment and have 3 vps on it 2 of the containers are running centos with cpanel and the other one ubuntu 16.04. Server become in dracut mode and datacenter want to reload it, i said don't want to lost the info since has not recent backups, they offered me to mount a new disk and attach the old disk on it. I has been trying to mount the old disk to get the info but the lack of knowledge don't let me continue. Need some server expert to finish the job, I alreday have it in good point, but really dont want to do the wrong thing.

I have set a new dedicate server in my Hosting provider. I need help for create and setup a virtualiztion with KVM and Virtualizor OS over the Linux hypervisor i have.

I have a virtualized cloud with Virtualizor with a single server. I have bought another server and I would like to add it to the cloud as an additional server to use the resources of this (disk space, ram memory, etc). The server I have is from HETZNER . I have new IP addresses too for this new server. I have the second Virtualizor license that must also be installed on the new server to be able to add it as a slave. It is urgent.