Yocto thermocoupletrabajos

Desde la compañía Nayar Systems S.L, una ingeniería de telecomunicaciones especializada en IOT industrial, sector de la elevación; tenem...procesos de desarrollo. COMPETENCIAS REQUERIDAS: Conocimiento especializado en lenguajes de programación C y/o C++. Experiencia trabajando con sistemas basados en microcontrolador, principalmente ARM. Competencia en sistemas operativos en tiempo real (RTOS). Conocimientos avanzados de sistemas operativos basados en GNU/Linux. Familiaridad con herramientas de creación de sistemas operativos como Yocto o Buildroot. Familiaridad con herramientas de desarrollo como Git, JIRA, Eclipse o Visual Studio Code. Familiaridad con metodologías de trabajo ágiles como SCRUM o Kanban. Si estás int...

...Buscamos un colaborador externo para el desarrollo de una máquina en el sector industrial. Las tareas del colaborador consistirán en la comunicación de varias placas de control (PCB) a través de Modbus y control de motores BLDC con EtherCAT. También colaborará en la programación del master (IPC). Conocimientos necesarios · Firmware: Embedded C, RTOS · Software: Embedded Linux (Yocto, Buildroot) Qt/QML (con C++ o Python) Bus industrial (MODBUS, EtherCAT) Control motores BLDC · Diseño electrónico -Posibilidad de incorporarse a la plantilla al finalizar el proyecto. -Necesidad de poder trabajar puntualmente en casa del cliente (El vallès Occidental) Periodo del ...

Necesitamos una compilación Yocto para una placa de embebidos del estilo BeagleBone y/o Raspberry. Sobre todo, es importante configurar bien el RTC. Se trabajaría en Linux, y dicha compilación estaría adaptada a nuestras necesidades hardware. Dicha compilación serviría para cargar nuestro propio software ya desarrollado.

The project consists in the development of 5 protocols in C/C++ for an IoT gateway. The people/team accepted to do this project will be supported by our development team. We accept individuals or companies, and we expect to hire 1 sen...and identify the frames that are being exchanged between two devices, monitored with a logic analyzer, to build up the protocol Telemetry: - Development: embedded - Unit tests - Testing with the controller - User acceptance tests Requirements: -Experience in C/C++ development for GNU/Linux -Experience in RTOS and ARM architectures -Experience in developing bootloaders or tools like Buildroot / Yocto -Experience in remote teamwork using Git, Jira, Eclipse, VS -Native or advanced English -Chinese not required but desirable -BSc Electronics or Compute...

Personalización de distribución de Linux Yocto. Hemos desarrollado una placa que usa un módulo embebido de TQ (el modelo en concreto es el TQMA6ULX) y necesitamos a alguien que nos ayude con la capa de BSP especifico para nuestro HW. Necesitamos tanto la modificación del kernel como la del uboot y la personalización del devicetree para que todos los dispositivos hw queden disponibles en el espacio de usuario de Linux.

* Procedimiento detallado de instalación del entorno y compilación, y en concreto para: + DEY - Digi Embedded Yocto (no para la distribución estándar de Yocto) v2.4 y/o v2.6. + Placa de evaluación Digi ConnectCore 6UL SBC Pro * Procedimiento para generar una nueva receta de DEY para anteriormente mencionada placa de desarrollo "Pro" que contenga: + El Device Tree en XML (ya disponemos de el) - Con puertos serie * Detalle del mapeo de cada una de las señales/pines al Linux-Device que hay que usar para controlarlas. * Confirmar que el Device Tree que tenemos en XML es correcto y COMPLETO (todos los puertos serie, ...) * Describir en un documento el mapeo de puertos lógicos a físicos y la función de cada ...

Requerimos para un proyecto un ayudante online para trabajar por teamviewer colaborando con la compilacion de un sistema operativo linux embebido para una Single Board Computer. Las tareas son colaborar, proponer, buscar informacion online y ayudar a compilar el sistema operativo. Normalmente utilizamos yocto. Presupuesto maximo por hora U$S 4.

Ingenieros con experiencia en: -Conocimientos de procesadores de aplicación con arquitectura ARM, en particular NXP 6 y similares. -Conocimientos de Embedded Linux -Conocimientos de Kernel de Linux, Yocto y Archlinux 50-60 mil pesos al mes.

...Informática o carrera a fin. <br /><br />Con capacidad para:<br /><br />Trabajar a distancia bajo poca supervisión<br />Ser autodidacta y responsable<br />Estar comprometido con su labor<br /><br />Con o sin experiencia en el desarrollo de programas y soluciones bajo entorno Linux con conocimientos (básico, intermedio o avanzado) en algunas de las siguientes herramientas:<br />HTML<br />Debian<br />Yocto<br />Embed<br />Firewall´s Frontend and backend<br />PHP, JS<br />Java<br />C<br />Ruby<br />Python<br />Perl<br />Mysql<br />Iptables<br />SOCKS<br /><br />La oferta es para laborar a distancia (desde su c...

El proyecto consiste en diseñar o modificar un driver para un sensor de imagen CMOS para utlizarlo con un micro iMX6 de NXP (anteriormente Freescale). El iMX6 es un quad core ARM9. Corre un sistema Linux basado en Yocto.

Yo necesito un programador para modificar una imagen de linux embebido (compilado en yocto) para que inicie en modo kiosco una aplicación esarrollada en QT. Por favor, dejar en un mensaje su e-mail para enviarle información detallada. Es preferible que hable español. Luego, habrá mas proyectos en QT (todos de corta duración 2-3 días). I need a programmer to modify an image embedded Linux (compiled in yocto) to start in kiosk mode a QT application. Please leave a message in your e-mail to send you detailed information. It is preferable to speak Spanish. Then, there will be more projects in QT (all short-lived 2-3 days).

I'm seeking a professional with expert knowledge in precision analog design. Goal of the project is a small prototype board to measure K type thermocouple elements - with two different approaches. Additionaly obvisouly a MCU will take place - as well as RS485 communication. Absolut main aspect is an accurate (in sense of stability, low noise and absolute value representation) K thermocouple element measurement. Two approaches are forseen - using the high precision MAX31856 as well as the AD8495 in conjunction with a 20-bit SAR and 24-bit SigDelt ADC. Apart from the ADC proposition the project comprisis of a full circuit and PCB creation. Additionaly also the needed firmware for the respective communication (over SPI) shall be properly implemented (well structured and ...

... KEY TASKS: * Development of device drivers to establish a seamless communication between the Embedded Linux Operating System on IMX6 board and our USB devices - USB Camera and USB printer. * Thorough testing of the device drivers to ensure compatibility with Linux and smooth functioning of the hardware. Linux OS is already installed on board IDEAL SKILLS: * Required changes to Linux OS with Yocto project * Proficiency in the Linux operating system is crucial. * Demonstrated expertise in driver development specifically regarding USB devices such as cameras and printers. * Comprehensive understanding of USB Camera and USB printer is advantageous. * Strong knowledge of debugging is beneficial, to iron out any potential issues during driver development. If your expertise aligns...

I'm looking for a skilled Yocto Linux Developer to work on a project involving IoT devices specifically designed for telemetry. Key Responsibilities: - Customize the Linux kernel to fit our project's specific requirements - Build and configure Yocto images for smooth operation - Integrating and testing hardware components to ensure maximum functionality Ideal Candidate: The successful applicant should have significant experience in embedded Linux development, specifically with Yocto. Proficiency in kernel customization, building and configuring Yocto images, and hardware integration/testing is required. Familiarity with IoT devices, particularly in telemetry, would be a significant advantage. With your expertise, we will develop a reliable, tailo...

I am in need of a skilled embedded software engineer able to create a customized Yocto Linux Build specifically for my Variscite MX93 V2-A SOM module. The build must include these specific features: - WiFi support - Bluetooth support - Custom device drivers - CAN x2 support Build Instructions and Resources can be found at I also need the build to be based on a specific kernel version (Kernel V6.1.36). Ideal candidates should have experience in Linux operating systems, with specific knowledge of Yocto Linux being a major advantage. Experience in custom software builds and creating device specific drivers would certainly make you standout. Effective communication is critical for this project, as I look forward to regularly reviewing your progress

...inverter modules (half bridge) at different power and switching frequencies and monitor key parameters during testing. I would also like to measure temperature on the top of the device (with the top cover open) via an IR camera. - Required measurements/ key parameters: Input variables such as voltage, current, switching frequencies, and any other parameters Temperature via the IR camera and a thermocouple in the coolant line Coolant flow rate I currently lack clarity on the equipment and setup required for such testing. Recommendations or guidance on necessary items, such as testing kit, power supply, any other equipment will be greatly appreciated. I can provide the cooling loop and the IR camera if it needs to be setup at our facility. Ideal candidates will have detailed ...

I'm seeking skilled freelancers to bring up the iMax6 SOC Linux and develop a test application. This task will include: 1. Linux Deployment: You'll need to deploy Debian on the iMax6 SOC. Experience with SOC Linux configurations, especially with Debian, is crucial. Yocto also OK 2. Test Application Development: You'll develop an application allowing for: - I2C Communication - SPI Communication - GPIO Control - CAN Communication Prior knowledge in these specific types of communication and control is required. Note: The end-users for this project haven't been determined yet. However, a user-friendly and intuitive design could be beneficial for possible end consumers or system administrators besides developers.

Project Description: I am looking for a skilled developer to integrate a 10.1 inch capacitive lvds/rgb touchscreen on a Raspberry Pi ARM board running a custom Yocto built Linux. The ideal candidate should have experience with the following: - Capacitive touchscreen integration - Raspberry Pi development - Linux customization and development with Yocto The project will involve: - Configuring the Raspberry Pi to recognize and interact with the capacitive touchscreen - Customizing the Yocto built Linux to support the touchscreen functionality - Testing and debugging the integration to ensure smooth operation - Touchscreen calibration feature needed If you have the necessary skills and experience, please submit your proposal outlining your relevant experience and appr...

I am looking for a freelancer who can design and build an 8 channel J type thermocouple module. The module should be accurate Ideal Skills and Experience: - Experience in designing and building thermocouple modules. - Knowledge of J type thermocouples and their temperature ranges. - Ability to design a module with multiple channels. If you have the skills and experience required for this project, please submit your proposal.

...powering the device for up to 20 days. I'm looking for a freelancer who can help me create this device as soon as possible(in 2 -3 weeks may be). If you are experienced and have the skills to meet my specifications, please apply for this job. This should securely connect AWS IOT core MQTT broker. Need hardware, firmware and secure connect. IOT features needed: 1. Full detailed GPS tracking 2. Thermocouple connectivity with Internal and external temperature 3. Tilt 4. Humidly 6. Battery Level should last 20 days minimum. 7 Pressure 8. Size should be like cellphone size including battery. 9. Device should have certificate and securely bootstrap it. 10. During GPS location it needs to be accurate to the feet. Hardware should be cheap and be approximately $25. If more neede...

...skilled and experienced developer to help me with a Yocto project. I need to port the kernel from version 4.9-1.0.x-imx to version 4.17. . The two links below summarize what I want: The first contains the project link, to run it on your machine you will have to change the device to imx7d-pico and the machine command looks like this: MACHINE=imx7d-pico DISTRO=poky source setup-environment build and bitbake ipc-core-image-minimal And the second link is where the kernel that must be ported to the project above is located. The project will change from kernel 4.17 to 4.9-1.0.x-imx Note: The build has only worked on Ubuntu 18.04. You will probably need wsl2 or any machine with Ubuntu 18.04. first link: second

I am looking for a skilled developer with experience in Yocto to modify and compile at91bootstrap and u-boot bootloaders and kernel source. The specific modifications needed include: - Change RGB LED settings in order to modify the color boot sequence - Adding custom drivers - Implementing security patches The ideal candidate should have: - Strong knowledge and experience with Yocto - Proficiency in modifying and compiling bootloader and kernel source code - Familiarity with adding custom drivers and implementing security patches The project has a preferred timeline of completing within 1 week. However, if you have a flexible schedule and can meet the requirements within a different timeframe, please let us know.

I need a code from Github modified and fixed so it can be compiled and uploaded. This is the github project: Curre...multiple of ESP32 will be on the same network and I don't want name conflict. 3. I want all the updates source files so I can compile it further on my PC. Thank you ESP32 Board used: https://www.amazon.co.jp/gp/product/B08PB3SBQX/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1 Breakout Board Used: https://www.amazon.co.jp/gp/product/B092H9FM3R/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1 Thermocouple controller: https://www.amazon.co.jp/gp/product/B092ZCSM7J/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 Solid State Relay: https://www.amazon.co.jp/gp/product/B087JVVH51/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

Title: Yocto: Switch from sysVinit to systemd Overview: I am looking for a skilled freelancer who can assist me in switching the operating system from sysVinit to systemd in my yocto / poky project. I am not sure about the specific requirements for this switch and would appreciate some guidance. The project needs to be completed within 2 weeks. Requirements: - Expertise in yocto / poky development - In-depth knowledge of both sysVinit and systemd - Experience with system configuration and initialization processes - Strong understanding of Linux operating systems, specifically Ubuntu, CentOS, and Debian - Familiarity with yocto project structure and build processes Deliverables: - Detailed documentation outlining the steps required to switch from sysVinit to s...

1. Check remote access connection, to test environment for building and debugging to be sure that all process will go smoothly (1-2 hours) 2. Applying of RT patches to the kernel, build image for testing (3-5 hours) 3. Image test and debug (1-4 hours), it depends if there are some changes which should be implemented specific to the rockchip kernel 4. Custom layer recipe development (1-2 hours)

I am seeking a skilled developer to work on a Yocto Project that incorporates the RT-Preempt patch for Rock Pi E hardware by Radxa. You will be provided with SSH access to a system featuring: +Debian-based Linux +Cross-compiling tools already set up for Rock Pi +A functional Yocto2 environment configured for Rock Pi E +A working Yocto2 console image for Rock Pi E Requirements: +Experience with the Yocto Project and real-time preemptive kernels (RT-Preempt) +understanding of Rock Pi E hardware would be fine +Expertise in system optimization techniques for realtime os +Familiarity with Linux kernel development and customization +Your Responsibilities: Integrate the RT-Preempt kernel patch into the Yocto system Include all necessary components to compile and run the ...

Need RDK DAC build Downloadable Application Containers (DAC) is a RDK initiative to develop an experience Yocto image experience poky and dunfell experience Create a simple DAC app installation process for Raspberry Pi

...external (20K) ten turns potentiometer. The duty cycle: (0-100 %), needs to be adjustable via an internal or external (50K) ten turns potentiometer. Also needed is some code written for a feedback loop via a current sensor on the tank section of the induction heater for safety reasons. It's important that we also have code for a digital PID temperature controller that we have it has a type-K thermocouple input and it needs to be connected to the PWM outputs in some way for good temperature control. Lastly, the STM32H735G-DK evaluation kit needs to have several live data screens of GUI programming included in the programming to assist the user with getting to the functions and for monitoring the PWM squarewave signals and amplitude in real-time with several graphics pages...

Linux embedded SW developer, iMX6/Zynq we are looking for a skilled Linux embedded software developer to work on a project involving the iMX6 hardware platform (Variscite). The main functionality of the software will be to control 2 SPI peripherals (one Master and one Slave). the iMx6 is connected to an FPGA with the two SPI. both driver for Linux shall be developed and tested we have the dt...iMX6 hardware platform (Variscite). The main functionality of the software will be to control 2 SPI peripherals (one Master and one Slave). the iMx6 is connected to an FPGA with the two SPI. both driver for Linux shall be developed and tested we have the dts and rootfs, and we already started testing of he Master SPI (we will share code). SPI Slave has to be developed from scratch OS built with ...

Looking for an experienced embedded Linux developer to help with the issue. The devices uses raspberry pi 3B+ and a TFT LCD in RGB mode as display and I run Qt’s distribution (b2qt) on it. When I enabled the logo support in Linux, no LOGO is displayed during kernel boot through TFT LCD. Moreover, the rainbow test does not show even though splash is not disabled. (but it worked on HDMI).

I am looking for a skilled developer to create a Linux Yocto project for the NXP Imax8. The project requires the following features: - Install linux Debian OS - Install QT support library - and peripheral driver Link of Hardware Hardware requirements for the NXP Imax8 are specified. - Licensing for this project should be Open Source. Ideal skills and experience for this job include: - Proficiency in Linux Yocto project development - Experience with NXP Imax8 hardware - Strong knowledge of multimedia, networking, and security features in Linux - Familiarity with Open Source licensing.

...write code for reading temperature data from a thermocouple sensor. - The temperature sensor must be wired, not wireless. - We are using Ardunio IC for reading it - We just want the code showing how you are reading the temperature from the thermocouple Needs to start immidiately and deliver fast Skills and Experience: - Strong background in embedded systems and programming. - Proficient in working with thermocouple sensors. - Knowledge of coding languages such as C or C++. - Experience with hardware interfacing and microcontrollers. - Ability to accurately read and interpret temperature sensor data. - Attention to detail and ability to write clean, efficient code. Deliverables: - Complete code for reading temperature data from the thermocouple sensor. - Do...

Looking for an experienced embedded Linux developer to help with the issue. The devices uses raspberry pi 3B+ and a TFT LCD in RGB mode as display and I run Qt’s distribution (b2qt) on it. When I enabled the logo support in Linux, no LOGO is displayed during kernel boot through TFT LCD. Moreover, the rainbow test does not show even though splash is not disabled. (but it worked on HDMI).

Write an initialization script using Yocto that will allow target machine (SAMA5D27) to automatically boot and run custom application at power up, preferably using systemd.

I am looking for an experienced embedded Linux developer to help me with my project. The target hardware platform is the Raspberry Pi, and I need a custom bootloader with features for network booting, encryption support, as well as an IP discovery tool. The project must be completed within 3 months. I need a talented developer who can leverage the Yocto project to create the custom bootloader and get it up and running. The bootloader should be tailored to the specific needs of my project. Furthermore, I would like support for debugging capabilities should any issues arise during the development cycle. I'm looking for a reliable and experienced developer who can work within my specified timeframe and deliver an exceptional product. If you think you have the needed skills ...

I am looking for a Unity programer who can help me to add control API using websocket or REST and build Uinity. I have a unity project programmed for webGL but needs to convert for Ubuntu and Windows changing JShook to API

I have a small craft distillery and am interested in using thermocouples to monitor temperatures from up to 14 locations 8 to start with. The programmer can select the thermocouples and data collector/transmitter. Data Display A monitor will be displayed on the wall of the distillery which will read out the current temperatures of each thermocouple and pressure sensor in larger readable numbers against an image of the equipment. User App/WebSite Users can also login to a web page remotely to: • View current temperature and pressure readings. • Create load and save different profiles configured allowing for user defined notifications (screen, text, email for determined temperature readings) Example - Profiles for Vodka, Whiskey, Stripping, Brandy Finishing, Moons...

I am looking for a freelancer with experience in using Yocto on a SAMA5D27 board. The specific version of Yocto we will be using is Kirkstone. The ideal candidate should have a strong background in Yocto configuration and experience working with SAMA5D27 boards. Basically, I have a modified ".dts" file and I need to rebuild the kernel and update the necessary files (.dtb, .itb, its) in order to boot successfully on the SAMA5D27 evaluation board. In addition, what I am looking is for a candidate to develop a detailed procedure on how to accomplish this having a new .dts file at hand.

I am interested in finding a freelancer to help me with a Yocto project on a SAMA5D27 board. Although I have limited experience with Yocto, I do have a good understanding of embedded Linux. I need help customizing the kernel on the board by rebuilding it using a modified device tree source (dts) file. The main purpose of this project is to reconfigure and rebuild the kernel so it functions properly on the board with the updated dts file. Assistance may be needed with certain hardware peripherals, though I am familiar with the hardware and may need assistance later.

Arduino Portenta Machine Control Thermocouple breakout

I have dome data Need to write It's about circuit with op amp and determine eutectic point with thermocouple, along with some statistical metrics (such as confidence intervals and error bar on graph).

...powering the device for up to 20 days. I'm looking for a freelancer who can help me create this device as soon as possible(in 2 -3 weeks may be). If you are experienced and have the skills to meet my specifications, please apply for this job. This should securely connect AWS IOT core MQTT broker. Need hardware, firmware and secure connect. IOT features needed: 1. Full detailed GPS tracking 2. Thermocouple connectivity with Internal and external temperature 3. Tilt 4. Humidly 6. Battery Level should last 20 days minimum. 7 Pressure 8. Size should be like cellphone size including battery. 9. Device should have certificate and securely bootstrap it. Hardware should be cheap and be approximately $25. If more needed let me know why? The firmware programming shall be flexibl...

We have started with a working Yocto Dunfell release from NXP that provides a limited OS. We have a layer from other manufacturers that permits building a Ubuntu-like release in Yocto, but are having trouble getting this layer to work with the NXP Dunfell.

...контроля версій Git. • Вміння користуватися командним рядком Linux. • Реляциійні БД, SQL. • Основи функціонування комп’ютерних мереж, протоколи TCP и HTTP. Знання HTTP/1.1. Знанння архитектури REST. • Багатопоточність. Буде плюсом: • C++14, 17, 20. • Qt. • Boost. • Засоби статичного і и динамічного анализа коду (cppcheck, clang-tidy, clazy, valgrind, gprof, …). • Розробка для embedded (buildroot, yocto, …). • Апаратні стандарти і протоколи (RS232, RS485, ModBus, …). Умови: • Стабільна компанія, своєчасна виплата заробітної плати. • Робота в офісі пн-пт 09.00/10.00 – 18.00/19.00. • Оплачувана відпустка - 24 к.д., лікарняні. • Комфортне робоче місце. • Можливості для пр...

I have wireless VINT HUB controlling 1x (4x digital input Phidget), 1x (4x digital output Phidget), 1x (4x thermocouple Phidget), and 1x graphic LCD Phidget. i have a toggle on switch, which i want to turn on a 3 phase heater, this heater is monitored by thermocouple to be able to be set at different temp. When temp is reached i want heater to turn on and off. Also have another toggle on switch which will turn on a 3 phase fan. Also have another thermocouple that is to be placed in product just to monitor temp in product as a reference. I would like both temp readouts on the LCD screen. Would like to use Python coding please.

Hello, I have a custom yocto image for coral dev, but the pci is not working. The issue seems to be related to the device tree. I have old device tree that works fine with kernel 4.14 but the current device tree on kernel 6.1 is not working. For more details please contact me. Here is the issue i have: root@coral-dev:~# lspci root@coral-dev:~# dmesg |grep pci [ 0.000000] Kernel command line: root=/dev/mmcblk1p2 rootfstype=ext4 rw rootwait net.ifnames=0 pci=pcie_bus_perf [ 1.768491] imx6q-pcie : error -ENOENT: pcie_bus clock source missing or invalid [ 1.770620] imx6q-pcie : error -ENOENT: pcie_bus clock source missing or invalid [ 1.770645] imx6q-pcie: probe of failed with error -2 [ 1.796623] imx6q-pcie: probe of failed

Having trouble with the thermocouple errors - and Thermostats KLipper - Through Mainsail keeps reporting a thermocouple error, which we belive is coming from the pin layout.

I need to build custom image with yocto for ARM

Hello, I need someone to help with creating a yocto recipe to build electron for raspberry pi running wayland

Hello, I need help building Yocto (kirkstone) image for coral dev board. Currently I'm able to build the Linux itself and run it on the device but I need help to setup the GPU/VPU libraries (libimxdmabuffer, libimxvpuapi), gsreamer-plugins-imx package (and specifically the jpeg decoder) , the WiFI/Bluetooth adapter and move the image to MMC. Please let me know in your comment the following otherwise your application won't be considered: Experience with Yocto: Yes/No Experience with gstramer: Yes/No Access to Coral Dev Board: Yes/No I'll provide access to environment to setup and build the image. To finalize the project I'll need a procedure how to replicate your work to a fresh repository. As of now I'm using the following layer repo: (wip/kirkst...