Firmware development

₹12500-37500 INR

Cerrado

Publicado

hace más de 5 años

₹12500-37500 INR

Pagado a la entrega

we need freelancer with following capabilities- 1. STM32F103 Programmer A.) Experience on CubeMX, Truestudio for code generation. B.) Strong hands on CAN, SPI, USART, 1-Wire, I2C, USB Protocols. C.) Ability to works with ADC, GPIO(IN, OUT) and WDT. D.) Prior programming experience in Automotive Domain. E.) Ability to power optimization through programming(sleep mode, LP Mode) for battery operated applications. 2. Quectel M66 OCPU Programmer A.) Knowledge of Operating System programming(Eg. RTOS, FreeRTOS, ChibiOS etc) B.) Familiar with Quectel OpenCPU SDK. C.) Ability to make firmware for Flash RAM(32Mb) to store data during runtime and retrieve whenever required. D.) Knowledge of communication protocol TCP/IP with dual server configuration(dual IP data transmission) E.) Ability to handle incoming SMS and send response according to requirements. F.) Ability Collect data from 3 – UARTs and send with existing data to specified server via TCP protocol.

ID del proyecto: 17700258

Información sobre el proyecto

16 propuestas

Proyecto remoto

Activo hace 6 años

¿Buscas ganar dinero?

Dirección de email

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto

Cobra por tu trabajo

Describe tu propuesta

Es gratis registrarse y presentar ofertas en los trabajos

16 freelancers están ofertando un promedio de ₹29.072 INR por este trabajo

@arrijal1992

Hi, 1. I have everything in your qualifications requirements exept automotive experience. I have use STM32 for various kind of project since 2012 , so I'm familiar with most of it's peripheral and platform development environment. 2. I have no experience on it. let's discuss the detail over chat. I use system workbench (SW4) as IDE, gcc arm none eabi as compiller, and STM32CubeMx as my project generator. Best Regards, Rijal

₹27.777 INR en 7 días

4,6

(165 comentarios)

7,4

@goharriz

Hello, I'm interested in your project, in particular, STM32F103 programming. What exactly is this for? and What do you need to accomplish? I look forward to your reply. Thanks.

₹27.777 INR en 20 días

5,0

(33 comentarios)

5,6

@RajEmbeddedIoT

hi, I have worked on stm32 mcus, Cubemx, all mentioned hw communication protocols and quectel modules. Also I have worked in various domains in Automotive industry for 8+ years. thanks, Raj

₹33.333 INR en 15 días

5,0

(3 comentarios)

3,2

@hunmin888

With over 5+ years of experience in software development, I believe I can assist you and make valuable suggestions. Using flexible approach and modern development tools and techniques I create robust and flexible code for your pleasure.

₹27.777 INR en 10 días

5,0

(6 comentarios)

2,8

@alperblm

Hi! I can do your job with STM32F103. I am experienced with STM32 series. Please let me know details to start.

₹27.777 INR en 10 días

5,0

(1 comentario)

0,5

@RDTechnoton

Hello. Ready to work on project 1 only. With 2 had a contact and it is too low paid. 1. STM32F103 Programmer - Have experience with nearly the same MCU (F151) A.) Experience on CubeMX, Truestudio for code generation. - CubeMX - yes, Truestudio - no, because too many mistakes inside the softeware from STM. B.) Strong hands on CAN, SPI, USART, 1-Wire, I2C, USB Protocols. - Yes C.) Ability to works with ADC, GPIO(IN, OUT) and WDT. - Yes D.) Prior programming experience in Automotive Domain.- Automotive area is a key area E.) Ability to power optimization through programming(sleep mode, LP Mode) for battery operated applications. - Yes. Usual requrement for stand-alone devices. My questions: - What is the final application of a device? - Is there a ready PCB?

₹38.888 INR en 1 día

0,0

(0 comentarios)

0,0

@vijaytarz

having experience of 6 years in C and C++ coding. worked in the organization to develop the firmware/application for microcontrollers and processors having experience in st microcontollers

₹27.777 INR en 20 días

0,0

(0 comentarios)

0,0

@Swargamteja

I had experience in STM32 Microcontroller, ADC, UART, I2C, GPIO STMCUBE tool and Hal layers. And I had experience in automotive domain.

₹25.222 INR en 30 días

5,0

(1 comentario)

0,0

@shreekant2016

I have my hands on -i2c -spi -modebus -USART -tcp/ip etc protocols..and -Linux "scratching" -RTOS -python -C++..etc and I have done many projects like "drainage management app" in which general features of MCU like adc/gpio/wdt timer is used at local node to collect diff. type data and that data is send to RTOS at local center via tcp/ip and afterwords UDP is used at main server to collect all data from no. of local centers.

₹24.444 INR en 25 días

0,0

(0 comentarios)

0,0

@cbkakhil

i m akhil, senier embedded engineer technorip pvt ltd. i have strong knowledge in OPENCPU quectel M66 and MC60 modules. THE i make a MQTT library in opencpu. i have 2 year experience in opencpu. (FOTA, RTC, HTTP, ALARM, MQTT, TCP, MULTI TASKING, I2C, UART, TIMERS) I write ssd1306 ln opencpu for OLED. i also interface GT511C3 fingerprint sensor in opencpu. NOTE: I dont know STM32, but know PIC, Arduino, NUVATON..etc

₹22.222 INR en 20 días

0,0

(0 comentarios)

0,0

@aepsupport

experienced in stm32f103 ret6 & vct6. all demo kit & library are available. ready to use technology accordingly you mentioned in brief.

₹27.777 INR en 30 días

0,0

(0 comentarios)

0,0

@lucky267

Hi, I worked on STM32F103. I have experience in I2C, SPI, RAM, low power modes, 1-wire communication protocol driver development. Knowledge in USB and CAN protocols. Experienced in SafeRTOS environment. Message me for more details about my skill set. Thanks, Vijaya.

₹27.777 INR en 3 días

0,0

(0 comentarios)

0,0

@smartElectron

Hello, I have been working as an embedded sw engineer for more than 7 years. So, i have strong experinece in fw development and STM32 series microcontrollers including Cube MX/ RTOS / UART / SPI etc. I will be pleased to have your project as my first job on this web site.

₹15.500 INR en 10 días

0,0

(0 comentarios)

0,0

@mehulraninga

Expert in Lynx-OS and Linux Device Driver development. Design and development of video surveillance Middleware, Application and Test Framework.  Proficient in C & C++ programming language.  Good knowledge of debugging software.  Good knowledge of communication interfaces and protocols like SPI, I2C, CAN, RS232, RS485, ModBUS, USB.  Testing and verification experience on Lynx-OS based system. Development work in test driver.  Good knowledge of Video and audio codec like H264, AAC.  Modular and reusable development work.  Well aware of Change management tool like Clear quest, SBM and Change Synergy  Experience on Agile Model and Methodology  Basic knowledge on LabView.  Hands on 32 Bits ARM controllers, PIC controller and 8051 controller.  Good knowledge of using IDEs like MPLAB, Eclipse, K-developer, KEIL.  Intermediately knowledge of PCB development in Protel and KiCad  Experience of working under pressure and strict deadline.

₹55.555 INR en 30 días