10kw wind turbine

Best PCB Design Expert at your doorstep! Dear Mick, We can design 10kw wind turbine and we will including a stand alone power station including batteries for all components. We have extensive experience in wind turbine with 100% accuracy We have successfully done many similar projects so we are perfect fir for this project. Please message us so that we can discuss in detail what shall be a step by step formula for your project. We couldn’t stop ourselves from bidding after going through the description as they are an exact match with our skill set and experience. We have experience in Yaw motor and Wind turbine based PCB design and know all the intricacies required to get the job done with perfection. With more than 15 Years of experience in PCB Design and Circuit Design in Altium, We can ensure you best quality work and before time delivery. Following is a brief list of expertise that we are carrying: 1. IOT products development 2. Microcontrollers based circuit design – STM32, STM8S etc. 3. Smart Products like Smart watch - GSM/GPRS/GPS etc. 4. Wireless Products - BLE/WIFI- ESP32 5. 10kw wind turbine, 380volts, yaw motor 6. 230volt 9amp 1800 rpm DC 7. Switch, Batteries, alone power station Please answer the following questions: 1 What are your future plans with this project? 2. Are there any specific market standards like CISPER you are aiming? 3. What will be ambient temperature of this product? Regards Avi Tech Experts Quality is never an Accident

For more details inbox me so that we can discuss in detail. For more details inbox me so that we can discuss in detail. For more details inbox me so that we can discuss in detail.

Hi, I hope you are doing fine. I have PhD in mechanical engineering from Tohoku University of Japan. I have published 20 Journal papers and 16 international conference papers. I have a lot of experience in automotive, aerospace, biotechnology, computers, electronics, microelectromechanical systems, energy conversion, robotics and automation, and manufacturing. I am also expert in mechanical engineering softwares including Ansys, Fluent, Comsol, CATIA, Solidworks, Abaqus and Inventor. I'm interested in your project. Please send me a message so that we can discuss more. Best regards.

Hi! Greetings! I am a Mechanical Engineer with expertise in Mechanical Design. I have done projects that include Design of Telescopic Knuckle Boom, Design of Steel Space Frame Chassis for Formula SAE Vehicle, Design of Hydraulic brick machine, etc. Given my experience with design projects, I believe I am the right person for this job. I can show you my previous work if you want. For this project, I will use SolidWorks for 3D modelling and ANSYS Workbench for FEA. I will provide CAD and analysis files along with manufacturing layouts and drawings. Further, I will provide a rich technical report explaining all the results and steps involved in design. Kindly contact me to discuss further. Regards,

HI, i have great skills in Power electronics and 8+ yrs of experience in power electronics and industrial electronics and mechanics fro medium power to high power supplies up to 35KW with 50 kV good design knowledge in DC-DC and AC-DC power converters like boost,buck,flyback,push pull and forward typologies and half bridge and full bridge good experience in VHDL/Verilog HDL, Xilinx and Altera FPGA, CPLD, Microblaze and Qsys processors, Xilinx ISE, Quartus II, XPS EDK, SDK, MODELSIM tools. I am excellent in MATLAB/Simulink design . I do like GRID tie Inverters,Power quality and control using FACTS devices and wind and solar grid tie using MPPT and D-STATCOMs. I can handle this perfectly

Hi, Im a Mechanical Engineer and expert in Energy Technology. I design standalone wind farms, solar farms and hybrid solutions in which i can provide a quality work for your requirement with 100 % accuracy. Let the professionals deal with this. Thanks

Hello I'm mohamed saeed mechanical engineer with high experience in wind turbine design I have checked your job description and ready to help you in your project

FREE OF COST CONSULTATION Dear Mick, I can design stand alone Power station with including batteries, all components while meeting all requirements for you. I have already designed 10kw wind turbine based Power station board so I will a perfect fit to do this project. I have read and understood your requirements and could do it for you in the least time and utmost superior quality. I have extensive experience in Power station board design and could design it for you as per your requirements. I am having more than 15 years of experience in PCB Design, Circuit Design, Circuit simulation, IOT products development and building electronic products. The expertise of mine is in the following fields: 1. Wireless Products – BLE, Wi-Fi, NFC, Lora etc. 2. Power Electronics- 3. IOT sensors interfacing 4. Microcontrollers- ESP32, STM32, STM8S, RL78 etc. 5. GSM, GPS, GPRS 6. Motor, Wind Turbine 7. Tachometer, Switch After reading your project details, I have certain queries and suggestions: 1. What is the application of this product? 2. What will be ambient temperature of this product? 3. What are the mechanical constraints to be taken care of? 4. What are the standards that the product would be complying to? Please try to answer these questions based on which I would be providing free of cost consultation. Please message me so that I can formulate a success plan for this project. Waiting for your reply, Regards Hari Mohan Engineering for one is a magic for others

Hello! I hope you are doing well. I’m a professional  Mechanical Engineer with more than 3years of experience in MECHANICAL DESIGN and CAD (SOLIDWORKS, AUTOCAD, ANSYS, KEYSHOT)  and other tools. I have gone through your job post for a 10kw wind mill design. I'm experienced with windmill designs for both horizontal and vertical systems.      I can design complete windmill setup with batteries for all of your requirements: attached tachometer, relay, detaching setup, and 1250l water tank as dump load.    Looking forward to discussing this with you. Best regards Vishnu

hi, thank you for posting this project. I have expertise for designing power systems including PV, Wind etc. I can assist you in this project. please inbox me to discuss. i am looking forward to talking to you and eventually working together.

Hi there I can help you designing your wind power station including, turbine instrumentation, transformers, breakers, receivers, inverters, battery charging units, and so on. I am an electrical and control engineer and I have worked with turbines, generators, and energy production systems also power electronics systems. Feel free to message me in chat to have a deeper talk on the exact details of your project and your requirements in chat. Best regards.

10kw wind turbine I am Minahil Hameed with a vast amount of experience in multiple fields like; Finance & Economics, Accounting & Cost Accounting, Business & Management, Taxation & Auditing. I have achieved great amount of success in this industry by providing TOP NOTCH solutions to my clients. I always provide quality services & respect to my clients because I consider him/her as my BOSS. I provide friendly environment to my clients so they always feel comfortable and openly discuss their requirements which allow me to produce MAXIMUM results...! Please visit my profile to see my reviews and samples. www.freelancer.com/u/writinglabb

Hey there, I am a renewable energy engineer, working as a freelancer for last 3 years. and have the same experience in my field. I am willing to design all the elements you mentioned in an excellent manner. I guarantee 100% high quality delivery with unlimited times revisions if not satisfied. My work will be: Fast Professional 100% Unique Cheaper than any other PLEASE GIVE ME A CHANCE TO PROVE YOU!

Sir, I want to said that I am very talented and dedicated person if you give me this I will not disappointing you.

hello I am an expert with more than 25 years of experience in the field of electronics and embedded systems and computer programming. i intrested to your project and can help you.

I have best design for your project. Experienced in Oil & Gas sector (Onshore and Offshore) as Maintenance and Instrument & Control System Engineer. Have a good understanding in project management, engineering economic, control system and MIEC (Maintenance, Inspection, Engineering Contract).

Dear, it will be a great pleasure for me to help you. Indeed, i am expert on such area. I have top publications journal on such field. Please contact me for further details.

Dear sir, My experience is making a generator without fuel, and I have also participated in a windmill contest in Yogyakarta, Indonesia. I hope you can work together for this technology