SD Card Splitter

$750-1500 USD

Cerrado

Publicado

hace alrededor de 14 años

$750-1500 USD

Pagado a la entrega

I need to develop an SD Card/Splitter that is able to run on two devices simultaneously. Neither of these devices will be accessing and storing information at the same time. However, it needs to be plugged into each device at the same time. The goal is to have a camera take a picture and then store the picture to the SD Card. Then on a set programmed interval the phone will be able to access the same SD Card and be able to process all the pictures taken since the last time it accessed the card. This has to be run in an environment were the only available internet signal is Edge or 3G so no WIFI solutions will be useful. What I need developed is the physical piece of hardware that will allow the SD Card to be used by two devices.

Engineering

Manufacturing

Manufacturing Design

Materials Engineering

Product Design

ID del proyecto: 660433

Información sobre el proyecto

7 propuestas

Proyecto remoto

Activo hace 14 años

¿Buscas ganar dinero?

Dirección de email

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto

Cobra por tu trabajo

Describe tu propuesta

Es gratis registrarse y presentar ofertas en los trabajos

7 freelancers están ofertando un promedio de $971 USD por este trabajo

@stemtechnologies

We can priovide the hardware forthis. Can you send the details of the devices to which the sd card to be shared. Regards Somasundaram.I

$1.500 USD en 30 días

5,0

(1 comentario)

4,4

@ddjuric

We can do it, but we need to know more technical details. Please, contact us by email if you are interested. Best regards.

$1.000 USD en 15 días

5,0

(1 comentario)

2,6

@sbk

Please check your pm box.

$800 USD en 28 días

4,2

(1 comentario)

2,4

@harfaspaul

Good day. I am writing on behalf of my 2 colleagues and myself. We are all PhD students in the field of electrical engineering. We have 5+ years experience in hardware&firmware development for embedded systems, ranging from motor control applications to RFID card readers, on a large number of commercial microcontrollers (PIC16,PIC18,dsPIC33,Analog Devices ADuC, ARM 7, ARM 9, ARM Cortex-M3). Please contact me by private message to discuss more details. Looking forward to hearing from you, eng. Paul HARFAS

$750 USD en 20 días

0,0

(0 comentarios)

0,0

@makinmakin

See details in MB.

$1.000 USD en 20 días

0,0

(2 comentarios)

0,0

@ntichvideo

Purposed system uses two SD sniffer cards wire for connection to a target msp430 board. The two sniffer cards plug into the camera and the phone. A SD breakout card allows any SD card to be plugged in. The break out card Is wired to the msp430 target board. The msp430 passes commands and information from both SD card slots to the SD card. Additionally the msp430 can provide other automation services if needed. Deliverables: Working Hardware prototype hardware, Source code, block diagram. Cost: $750 US Terms: 50% to start project 50% on delivery. Buyer pays shipping. Time line: Delivery 4 weeks after first payment received.

$750 USD en 28 días