Architectural Autocad Designer Needed

Must be aware of australian standards for design Once you have converted the drawings into Autocad files, can you please prepare the following drawings also. 1. A set out plan with grids to enable the surveyor a convenient situation to do the peg out 2. Show contextual information on floor plans… 3. Show dimensions of site works, driveway and the like 4. Show adequate levels throughout all the drawings to show clarity between the finished level and the existing natural ground levels 5. Prepare New Sections as identified in the attachment- 6. Several construction details at scale of 1:20 & 1:10 as suitable to elaborate and explain the non-standard junctions in this design – for example, The batten screen on the front façade of dwelling fronting Nioka St 7. Show downpipes on roof plan and elevations, if possible- Downpipes locations are even though mentioned in the Stormwater Drawings 8. Elevations – to have more info such as ridge levels, heights, downpipes etc. Annotations for finishes & colours. 9. Ground floor Concrete set out plan showing set downs, rebates etc along with dimensions from the grid. 11. Please check if we have civil drawings that show surface drains, sewer pits, etc . Do we have any coordination done with the water service coordinators to determine the street RL for storm water and Sewers.